Ubiquiti WSM5 Users Manual

Model: WSM5
ComplianCe Sheet
Modular Usage
The powerful 5 GHz WISP OEM Station (model: WSM5) is designed specifically for the WISP OEM market. The transmitter must only be used with the approved antenna(s). Please refer to www.ubnt.com/products
fordetails.
The WSM5 is compatible with existing Atheros Linux drivers and
is only capable of 5745-5850MHz
frequency range per the FCC/IC grant. Power and frequency limits are hardcoded into the radio card EEPROM.
It is necessary that the system integrators perform all applicable retesting and certification for their final system configurations.
Important Modular Approval Information
This device is intended only for the OEM integrator under the following conditions:
The antenna must be installed such that 66 cm is maintained between the antenna and users, and
The transmitter module may not be co-located with any other transmitter or antenna.
IMPORTANT NOTE: In the event that these conditions cannot be met (for example, certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization.
Loading...
+ 7 hidden pages