Ubiquiti UVPPRO Users Manual
Enterprise VoIP Phone with
Calculator
Calculator
Calendar
Calendar
Gallery
Gallery
Sound Recorder
Sound Recorder
Hangouts
Hangouts
Gmail
Gmail
Settings
Settings
Drive
Drive
5" Touchscreen, Bluetooth,
WiFi, and Built-In Camera
Model: UVP-Pro
Introduction
C
al
c
ul
ato
r
C
a
lcula
tor
C
al
en
d
ar
C
al
e
nd
ar
Ga
ll
e
ry
G
al
lery
Sound
R
ec
o
rde
r
Soun
d
R
ec
o
rde
r
Ha
n
g
o
ut
s
H
an
g
ou
t
s
Gmail
Gmail
S
e
t
t
ings
Set
t
ings
D
riv
e
D
riv
e
Thank you for purchasing the Ubiquiti Networks® UniFi®
VoIP Phone Professional, model UVP-Pro. The UniFi VoIP
Phone Professional is designed to integrate easily into
a UniFi network. The phone interface is based on the
popular Android™ platform for ease of use. This Quick Start
Guide is designed to guide you through the installation,
provide an overview of the interface, and also includes the
warrantyterms.
Package Contents
Enterprise VoIP Phone
with 5" Touchscreen, WiFi,
and Built-In Camera
Model: UVP-Pro
UniFi VoIP Phone Professional Quick Start Guide
Installation Requirements
• UniFi Security Gateway
• UniFi Switch or PoE+ (802.3at-compliant) switch
• UniFi Controller
TERMS OF USE: All Ethernet cabling runs must use CAT5 (or above). It is the customer’s
responsibility to follow local country regulations and indoor cabling requirements.
Before You Begin
Remove the protective
covering from the handset.
Remove the protective film
from the touchscreen.
Hardware Overview
Front
Camera
Touchscreen
LED
Camera Built-in camera can be used for snapping photos for
avatars or videoconferencing applications.
Touchscreen The 5" (diagonal) touchscreen display is used for
all interface navigation and dialing.
LED The LED will illuminate when the device is first connected
to a 48V power source. Once the phone has started up, the
LED will turn off.
IMPORTANT: The LED will flash when a firmware update
is occurring. Do not disconnect power/Ethernet from the
device during this time.
Back Ports
Main/PoE Secondary
Main/PoE
Main/PoE The Main/PoE Ethernet port is 802.3at-compliant
and is used to connect data and power to the UniFi VoIP
Phone Pro. Connect this port to the same network as the UniFi
Security Gateway VOIP port.
Secondary
Secondary The Secondar y Ethernet port is used for bridging.
WARNING: Do not connect a powered Ethernet
connection to the Secondary port.
Side Ports
Micro-USB Port The Micro-USB port is only
intended for advanced users connecting the UniFi
VoIP Phone Pro to a computer.
Headset Jack 3.5 mm jack for optional wired stereo
and microphone headsets.
Handset
Mute button
Mute Press the Mute button to mute the microphone on the
handset.
*640-00143-03*
640-00143-03
Hardware Installation
Main/PoE Secondary
The UniFi VoIP Phone Professional is designed for desktop
placement. To connect the phone, perform the following steps:
1. Connect one end of an Ethernet cable to the wall jack that
is connected to your 48V, 802.3at-compliant switch.
2. Connect the other end of the Ethernet cable to the port
labeled Main/PoE on the UniFi VoIP Phone Professional.
Software Configuration
The UniFi VoIP Phone Professional is automatically detected by
the UniFi Controller (4.6.x or above).
Installing the UniFi Controller
If you haven’t already installed the UniFi Controller software,
you can download it at downloads.ubnt.com/unifi
Adopting the Phone in the UniFi Controller
1. Launch the UniFi Controller and go to the Devices tab.
2. Click Adopt.
Loading...