Ubiquiti LBE5AC Users Manual

5 GHz, 23 dBi airMAX® CPE
with InnerFeed® Technology

Model: LBE-5AC-23

Introduction

Thank you for purchasing the Ubiquiti Networks®

™

LiteBeam

ac. This Quick Start Guide is designed to guide you

through installation and also includes warranty terms.

Package Contents

Antenna Feed Center Reflector

Panel

Side Reflector Panels

(Qty. 2)

Feed Receiver Ball Joint Mount Metal Strap

5 GHz, 23 dBi airMAX® CPE

®

with InnerFeed

Technology

Gigabit PoE (24V, 0.3A)
with Mounting Bracket

Products may be different from pictures and are subject to change without notice.
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet

cable and earth grounding must be used as conditions of product warranty. TOUGHCable™ is
designed for outdoor installations. It is the customer’s responsibility to follow local country
regulations, including operation within legal frequency channels, output power, and Dynamic
Frequency Selection (DFS) requirements.

Power Cord Quick Start Guide

Model: LBE-5AC-23

Installation Requirements

• 7 mm socket wrench or screwdriver

• Shielded Category 5 (or above) cabling should be used for
all wired Ethernet connections and should be grounded
through the AC ground of the PoE.

We recommend that you protect your networks from
harmful outdoor environments and destructive ESD events
with industrial‑grade, shielded Ethernet cable from Ubiquiti
Networks. For more details, visit www.ubnt.com/toughcable

Application Examples

The LiteBeam ac mounted outdoors with the reflector
installed provides directional outdoor coverage (gain
reflector‑dependent).

The LiteBeam ac mounted outdoors without the reflector
installed provides outdoor‑to‑indoor coverage using the 3 dBi
Antenna Feed only.