Datasheet
|
Zero-Variable Wireless Infrastructure Deployment
Models: BM2HP, BM5HP
Completely integrated Radio
Directly plugs into any Antenna
that has a Type N female connector
Robust Weatherproof Design
Overview
Revolutionary Design
Bullet M is the latest version of the popular
Ubiquiti Bullet. Like its predecessor, Bullet
M is a wireless radio with an integrated
Type N RF connector that can be directly
plugged in to any Antenna* to create a
powerful and robust outdoor Access Point,
Client, or Bridge.
The Bullet M features a signal strength LED
meter for antenna alignment, a low-loss
integrated N-type RF connector, and a
robust weatherproof design.
With up to 600mW of power and enhanced
receiver design, the Bullet M is ideal for
long-distance links, capable of 100Mbps+
real TCP/IP speeds over multi-km distances.
02
Custom Weatherproofing Gasket
integrated in Type N Connector
Weatherproofing Gasket Ethernet Cable (Bullet M is powered over ethernet)**
Datasheet
|
Zero Variable Deployment
Bullet M eliminates the need to use RF
cables and requires no special antenna or
tools to install. No radio card / host board
issues. No RF cable quality concerns. No
mechanical stability concerns. No enclosure
mounting requirements. With the Bullet M,
operators can just plug and go.
Integrated AirMax Technology
The Bullet M can instantly become a
powerful TDMA BaseStation utilizing
Ubiquiti's breakthrough AirMax technology.
With AirMax, PtMP networks can scale
gracefully while maintaing high throughput
and low latency performance.
Usage Example
Sector Antennas, Omni Antennas, Dish Antennas, etc.; any Antenna* can easily be transformed into
a powerful and robust outdoor Access Point, Client, or Bridge by simply plugging in Bullet M.
* Bullet M HP works with any antenna with a Type N female connector
** Ethernet cable and POE Adapter sold separately
Ubiquiti Networks, Inc. Copyright © 2011, All Rights Reserved www.ubnt.com
Models
03
Datasheet
|
BM2HP (2.4GHz, Hi-Power, 28dBm), BM5HP (5GHz, Hi-Power, 25dBm)
Ubiquiti Networks, Inc. Copyright © 2011, All Rights Reserved www.ubnt.com
Software
*
OS
AirOS is an intuitive, versatile, highly
developed Ubiquiti firmware technology. It
is exceptionally intuitive and was designed
to require no training to operate. Behind the
user interface is a powerful firmware
architecture which enables hi-performance
outdoor multipoint networking.
Protocol Support
Ubiquiti Channelization
Spectral Width Adjust
ACK Auto-Timing
AAP Technology
Multi-Language Support
View
Integrated on all Ubiquiti M products,
AirView provides Advanced Spectrum
Analyzer Functionality: Waterfall, waveform,
and real-time spectral views allow
operators to identify noise signatures and
plan their networks to minimize noise
interference.
Waterfall Aggregate energy over time for
each frequency.
Waveform Aggregate energy collected.
Real-time Energy is shown real-time as a
function of frequency.
Recording Automize AirView to record and
report results.
04
www.ubnt.com/airos
www.ubnt.com/airview
Datasheet
|
Contro l
AirControl is a powerful and intuitive web
based server network management
application which allows operators to
centrally manage entire networks of
Ubiqutii devices.
Network Map
Monitor Device Status
Mass Firmware Upgrade
Web UI Access
Manage Groups of Devices
Task Scheduling
www.ubnt.com/aircontrol
Ubiquiti Networks, Inc. Copyright © 2011, All Rights Reserved www.ubnt.com
Specifications
System Information
Processor Specs Atheros MIPS 24KC, 400MHz
Memory Information 32MB SDRAM, 8MB Flash
Networking Interface 1 X 10/100 BASE-TX (Cat. 5, RJ-45) Ethernet
Regulatory / Compliance Information
Wireless Approvals FCC Part 15.247, IC RS210, CE
RoHS Compliance YES
Physical / Electrical / Environmental
RF Connector Integrated N-type Male Jack (connects directly to antenna)
Enclosure Size 15.2 x 3.7 x 3.1 cm (length, width, height)
Weight 0.18kg
Enclosure Characteristics Outdoor UV Stabilized Plastic
Power Rating Up to 24V
Power Method Passive Power over Ethernet (pairs 4, 5+; 7, 8 return)*
Operating Temperature -40C to 80C
Operating Humidity 5 to 95% Condensing
Shock and Vibration ETSI300-019-1.4
M2 M5
Max Power Consumption 7 Watts 6 Watts
05
Datasheet
|
Range Performance
Outdoor (Antenna Dependent) Over 50km
* POE Adapter is sold separately
Ubiquiti Networks, Inc. Copyright © 2011, All Rights Reserved www.ubnt.com
Specifications (cont.)
Bullet M2 HP - Operating Frequency 2412-2462 MHz
2.4 GHz TX POWER SPECIFICATIONS
DataRate Avg. TX
6-24 Mbps 28 dBm +/- 2 dB
36 Mbps 25 dBm +/- 2 dB
11b/g11n
48 Mbps 24 dBm +/- 2 dB
54 Mbps 23 dBm +/- 2 dB
OUTPUT POWER: 28 dBm
Tolerance
2.4 GHz RX POWER SPECIFICATIONS
DataRate Sensitivity
24 Mbps -83 dBm +/- 2 dB
36 Mbps -80 dBm +/- 2 dB
11b/g11n
48 Mbps -77 dBm +/- 2 dB
54 Mbps -75 dBm +/- 2 dB
06
Tolerance
MCS0 28 dBm +/- 2 dB
MCS1 28 dBm +/- 2 dB
MCS2 28 dBm +/- 2 dB
MCS3 28 dBm +/- 2 dB
MCS4 27 dBm +/- 2 dB
MCS5 25 dBm +/- 2 dB
MCS6 23 dBm +/- 2 dB
MCS7 22 dBm +/- 2 dB
5 GHz TX POWER SPECIFICATIONS
DataRate Avg. TX
1-24 Mbps 25 dBm +/- 2 dB
11a11n / AirMax
36 Mbps 23 dBm +/- 2 dB
48 Mbps 21 dBm +/- 2 dB
54 Mbps 20 dBm +/- 2 dB
MCS0 25 dBm +/- 2 dB
MCS1 25 dBm +/- 2 dB
MCS2 25 dBm +/- 2 dB
MCS3 25 dBm +/- 2 dB
MCS4 24 dBm +/- 2 dB
MCS5 22 dBm +/- 2 dB
MCS6 20 dBm +/- 2 dB
MCS7 19 dBm +/- 2 dB
Bullet M5 HP - Operating Frequency 5170-5825 MHz*
OUTPUT POWER: 25 dBm
5 GHz RX POWER SPECIFICATIONS
Tolerance
11a11n / AirMax
MCS0 -96 dBm +/- 2 dB
MCS1 -95 dBm +/- 2 dB
MCS2 -92 dBm +/- 2 dB
MCS3 -90 dBm +/- 2 dB
MCS4 -86 dBm +/- 2 dB
MCS5 -83 dBm +/- 2 dB
MCS6 -77 dBm +/- 2 dB
MCS7 -74 dBm +/- 2 dB
DataRate Sensitivity
24 Mbps -83 dBm +/- 2 dB
36 Mbps -80 dBm +/- 2 dB
48 Mbps -77 dBm +/- 2 dB
54 Mbps -75 dBm +/- 2 dB
MCS0 -96 dBm +/- 2 dB
MCS1 -95 dBm +/- 2 dB
MCS2 -92 dBm +/- 2 dB
MCS3 -90 dBm +/- 2 dB
MCS4 -86 dBm +/- 2 dB
MCS5 -83 dBm +/- 2 dB
MCS6 -77 dBm +/- 2 dB
MCS7 -74 dBm +/- 2 dB
Tolerance
Datasheet
|
* Only 5725 - 5850 MHz is supported in the USA
Ubiquiti Networks, Inc. Copyright © 2011, All Rights Reserved www.ubnt.com
Misc
07
Datasheet
|
Protect your networks from the most brutal
environments with Ubiquiti’s industrialgrade shielded ethernet cable, TOUGHCable.
Increase Performance Dramatically
improve your ethernet link states, speeds,
and overall performance with Ubiquiti
TOUGHCables.
Extreme Weatherproof TOUGHCables
have been built to perform even in the
harshest weather and environments.
Eliminate ESD Attacks Protect your
networks from devastating ESD Attacks,
TOUGHCables eliminate ESD attacks and
ethernet hardware damage.
Extended Cable Support TOUGHCables
have been developed to have increased
power handling performance for extended
cable run lengths.
Bulletproof your networks
TOUGHCable is currently available in two
versions: Level 1 Shielding Protection and
Level 2 Shielding Protection.
Level 1 is a Category 5e (Up to 1Gbps
Ethernet Support) Outdoor Carrier Class
Shielded Cable.
Level 2 is a Category 5e Enhanced Gigabit
Performance (1Gbps Ethernet Support)
Outdoor Carrier Class Shielded Cable.
Additional Information:
• 24 AWG copper conductor pairs
• ESD Drain Wire: 26 AWG integrated ESD
Drain wire to prevent ESD attacks &
damage.
• PVC outdoor rated jacket
• 0.35um foil shield
• Multi-Layered Shielding
• 1000ft (304.8m) length
Learn more:
www.ubnt.com/toughcable
ESD Attacks are overwhelmingly the leading
cause for device failures. The diagram
below illustrates the areas vulnerable to
ESD Attacks in a defenseless network.
Unshielded
cable with
no ESD Drain
LAN
ESD
OUTDOOR
ESD
POE Adapter with
no earth ground
MAIN
ESD
Twisted Pair
ESD Drain Wire
Separation
Cable Shield
Weatherproof Jacket
LEVEL1
SHIELDING PROTECTION
Twisted Pair
Anti-Crosstalk Divider
ESD Drain Wire
Cable Shield
Secondary Cable Shield
Weatherproof Jacket
LEVEL2
SHIELDING PROTECTION
By using a grounded Ubiquiti POE adapter
(sold separately) along with Ubiquiti
TOUGHCable (sold separately), you can
effectively eliminate ESD Attacks.
Ubiquiti
TOUGHCable
Ubiquiti POE
Adapter
Ubiquiti Networks, Inc. Copyright © 2011, All Rights Reserved www.ubnt.com
08
Datasheet
|
TERMS OF USE: The Ubiquiti radio device must be professionally installed. Shielded ethernet cable and earth grounding must be used as conditions
of product warranty. It is the installers responsibility to follow local country regulations including operation within legal frequency channels, output
power, and Dynamic Frequency Selection (DFS) requirements.
For further information, please visit www.ubnt.com.
All specifications in this document are subject to change without notice.
Ubiquiti Networks, Inc. Copyright © 2011, All Rights Reserved www.ubnt.com
BM-DS-041411
Loading...