Ubiquiti ACBISP User Manual

airMAX® Home Wi-Fi
Access Point with PoE In/Out

Model: ACB-ISP

Introduction

Thank you for purchasing the airMAX® airCube™ ISP Access Point. This
Quick Start Guide is designed to guide you through installation and also
includes warranty terms.

Package Contents

airMAX® Home Wi-Fi
Access Point with PoE In/Out

Model: ACB-ISP

airCube ISP Access Point Quick Start Guide

1

Hardware Overview

Access Point Front

LED

The LED lights up when the airCube is powered on.

2

Access Point Back

WAN

24V PoE OUT

LAN Ports

1-3

Three Fast Ethernet ports available to connect 10/100

Mbps devices to the Internet. Port1 also allows 24V PoE

In and can be used to power the airCube.

Connects to and powers a 24V PoE airMAX CPE radio.

The Power Port can be used to power the airCube. The

power adapter must be 5V with a MicroUSB connector

(not included).

WAN Port

Power Port

3

Hardware Installation

1. Connect one end of an Ethernet cable to the WAN Port on the back
of the airCube. Connect the other end of the Ethernet cable to your
airMAX CPE radio.

4

2. The airCube can be powered one of two ways: Micro USB adapter (5V)
or PoE 24V In on LAN Port 1.

• If using a Micro USB power adapter (not included) to power the

airCube, connect the power adapter to the Power Port on the back of
the airCube and the other end of the adapter into a power outlet.

5

• If using Power over Ethernet to power the airCube, connect one end

of an Ethernet cable to LAN Port 1 and the other end of the cable to a

24V PoE Out port on a PoE adapter.

3. The LED in the base of the airCube will light up as soon as the device
is powered on.

6

UMobile App

The airCube can be installed and configured using the U Mobile app

on your mobile phone or tablet. Follow these steps to ensure proper
installation:

1. Download and install the U Mobile app from the AppStore (iOS) or
Google Play™ (Android).

Ensure that Wi-Fi is enabled on your mobile phone
or tablet.

2. Launch the U Mobile app and proceed to the section that corresponds
with your mobile device: Android Users or iOS Users.

7

Android Users

Installer

1. Tap the icon to add a new device to U Mobile.

2. Select Discover to scan for devices on the active Wi-Fi networks in
range.

3. Tap the airCube device from the list. U Mobile will activate a QR scanner
using the camera function on your mobile device.

4. Scan the QR code located on the bottom of the airCube. Once the QR
code is scanned, U Mobile will return to the main app screen.

5. Proceed to the section: Verify Connection to airCube

iOS Users

1. Tap the

2. From the two options provided, select airCube. U Mobile will activate a

3. Scan the QR code located on the bottom of the airCube. Once the QR

4. Exit U Mobile and open the Settings app on your mobile device.

5. Select Wi-Fi and connect to the SSID for the airCube wireless network

6. Once the WPA key is filled in, return to the U Mobile app.

8

icon to add a new device to U Mobile.

QR scanner using the camera function on your mobile device.

code is scanned, U Mobile will return to the main app screen.

named: airCube-<MAC Address>