Tyan GT24B5501 User Manual

TYAN GT24

B5501

Service Engineer’s Manual

http://www.tyan.com

PREFACE

This publication, including all photographs, illustrations, and software, is protected under international copyright laws, with all rights reserved. Neither this manual, nor any material contained herein, may be reproduced without written consent of manufacturer.

Version 1.00

Disclaimer

Information contained in this document is furnished by MiTAC International Corporation and has been reviewed for accuracy and reliability prior to printing. MiTAC assumes no liability whatsoever, and disclaims any

express or implied warranty, relating to sale and/or use of TYAN including liability or warranties relating to fitness for a particular purpose or merchantability. MiTAC retains the right to make changes to produce descriptions and/or specifications at any time, without notice. In no event will MiTAC be held liable for any direct or indirect, incidental or consequential damage, loss of use, loss of data or other malady resulting from errors or inaccuracies of information contained in this document.

Trademark Recognition

All registered and unregistered trademarks and company names contained in this manual are property of their respective owners including, but not limited to the following.

TYAN® is a trademark of MiTAC International Corporation.

Intel

is a trademark of Intel® Corporation.

, AMIBIOS® and combinations thereof are trademarks of AMI

AMI Technologies. Microsoft®, Windows® are trademarks of Microsoft Corporation.

IBM

, PC®, AT® and PS/2® are trademarks of IBM Corporation.

Winbond

is a trademark of Winbond Electronics Corporation.

products

http://www.tyan.com

Federal Communication Commission (FCC)

Notice for the USA

Compliance Information Statement (Declaration of Conformity Procedure) DoC FCC Part 15: This device complies with part 15 of the FCC Rules

Operation is subject to the following conditions:

1) This device may not cause harmful interference;

2) This device must accept any interference received including interference that may cause undesired operation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try one or more of the following measures:

– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and the receiver. – Plug the equipment into an outlet on a circuit different from that of

the receiver.

Consult the dealer on an experienced radio/television technician for help.

Notice for Canada

This apparatus complies with the Class A limits for radio interference as specified in the Canadian Department of Communications Radio Interference Regulations. (Cet appareil est conforme aux norms de Classe A d’interference radio tel que specifie par le Ministere Canadien des Communications dans les reglements d’ineteference radio.)

Notice for Europe (CE Mark) This product is in conformity with the Council Directive 89/336/EEC, 92/31/EEC (EMC).

CAUTION: Lithium battery included with this board. Do not puncture, mutilate, or dispose of battery in fire. There will be danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by manufacturer. Dispose of used battery according to manufacturer instructions and in accordance with your local regulatio-

-ns.

http://www.tyan.com

About this Manual

This manual provides you with instructions on installing your TYAN GT24-B5501. This Manual is intended for experienced users and integrators with hardware knowledge of personal computers.

This manual consists of the following parts:

Chapter1:

Provides an introduction to the TYAN GT24-B5501 barebones, standard parts list, describes the external components, gives a table of key components, and provides block diagram of the system.

Chapter2:

Chapter3:

Appendix:

Covers procedures on installing the CPU, memory modules and hard drives.

Covers removal and replacement procedures for pre-installed components.

List the cable connection and FRU part tables for reference of system setup, and technical support case a problem arises with your system.

For information on the motherboard, please refer to the attached motherboard user’s manual. You can find the detailed description about jumper and BIOS settings from the motherboard manual.

http://www.tyan.com

SAFETY INFORMATION

Before installing and using TYAN GT24-B5501, take note of the following precautions:

·Read all instructions carefully.

·Do not place the unit on an unstable surface, cart, or stand.

·Do not block the slots and opening on the unit, which are provided for

ventilation.

·Only use the power source indicated on the marking label. If you are not sure, contact the power company.

·The unit uses a three-wire ground cable, which is equipped with a third pin to ground the unit and prevent electric shock. Do not defeat the purpose of this pin. If you outlet does not support this kind of plug, contact your electrician to replace your obsolete outlet.

·Do not place anything on the power cord. Place the power cord where it will not be in the way of foot traffic.

·Follow all warnings and cautions in this manual and on the unit case.

·Do not push objects in the ventilation slots as they may touch high

voltage components and result in shock and damage to the components.

·When replacing parts, ensure that you use parts specified by the

manufacturer.

·When service or repairs have been done, perform routine safety checks to verify that the system is operating correctly.

·Avoid using the system near water, in direct sunlight, or near a heating device.

·Cover the unit when not in use.

http://www.tyan.com

Table of Contents

Chapter 1: Overview......................................................................... 9

1.1 About the TYAN GT24-B5501 .................................................. 9

1.2 Product Models......................................................................... 9

1.3 Features.................................................................................. 10

1.4 Standard Parts List ................................................................. 14

1.4.1 Box Contents ................................................................... 14

1.4.2 Accessories ..................................................................... 15

1.5 About the Product................................................................... 16

1.5.1 System Front View........................................................... 16

1.5.2 System Rear View ........................................................... 16

1.5.3 LED Definitions ................................................................ 17

1.5.4 Motherboard (S5501) Layout........................................... 19

1.5.5 Jumpers & Connectors .................................................... 20

1.5.6 System Block Diagram .................................................... 21

1.5.7 Internal View .................................................................... 22

Chapter 2: Setting Up..................................................................... 23

2.0.1 Before you Begin ............................................................. 23

2.0.2 Work Area........................................................................ 23

2.0.3 Tools ................................................................................ 23

2.0.4 Precautions...................................................................... 24

2.1 Installing Motherboard Components....................................... 25

2.1.1 Removing the Chassis Cover .......................................... 25

2.1.2 Installing the CPU and Heatsink...................................... 26

2.1.3 Installing the Memory....................................................... 29

2.1.4 Installing Hard Drives....................................................... 32

2.1.5 Installing the PCI-E Cards ............................................... 34

2.2 Rack Mounting........................................................................ 36

2.2.1 Installing the Server in a Rack......................................... 36

http://www.tyan.com

2.2.2 Installing the inner Rails to the Chassis........................... 37

2.2.3 Installing the Outer Rails to the Rack .............................. 38

2.2.4 Rack mounting the Server ............................................... 40

Chapter 3: Replacing Pre-Installed Components ........................43

3.1 Introduction ............................................................................. 43

3.2 Disassembly Flowchart........................................................... 43

3.3 Removing the Cover............................................................... 45

3.4 Replacing Motherboard Components..................................... 45

3.4.1 Replacing Expansion Card .............................................. 45

3.4.2 Disconnecting All Motherboard Cables ...........................47

3.4.3 Removing the Motherboard ............................................. 49

3.5 Replacing the LED Control Board .......................................... 50

3.5.1 M1008 LED Control Board Features ............................... 52

3.5.2 M1008 LED Control Board Connector Pin Definition ...... 52

3.6 Replacing the System Fan ..................................................... 53

3.7 Replacing the M1232 HDD Backplane................................... 56

3.7.1 M1232 HDD Backplane Features.................................... 58

3.7.2 M1232 HDD Backplane Connector Pin Definitions ......... 60

Appendix I: Cable Connection Tables .......................................... 65

Appendix II: FRU Parts Table ........................................................67

Appendix III: Technical Support....................................................69

http://www.tyan.com

Chapter 1: Overview

1.1 About the TYAN GT24-B5501

Congratulations on your purchase of the TYAN® GT24-B5501, a highly optimized rack-mountable barebone system. GT24-B5501 is designed to

support one Intel 16GB UDIMM DDR3-800/1066/1333 memory, providing a rich feature set

and incredible performance. Leveraging advanced technology from Intel GT24-B5501 server system is capable of offering scalable 32 and 64-bit computing, high bandwidth memory design, and lightning-fast PCI-E bus implementtation.GT24-B5501 not only empowers your company in nowadays IT demand but also offers a smooth path for future application usage.

TYAN

is also proud to deliver GT24-B5501 in flavor while supporting up to

four hot-swap hard drives. GT24-B5501 uses TYAN®’s latest chassis featuring a robust structure and a solid mechanical enclosure. All of this provides GT24-B5501 the power and flexibility to meet the needs of nowadays server application.

Xeon processor 3400 Series and up to 32GB RDIMM or

1.2 Product Models

Model HDD Bays Power supply

B5501G24V4H

Hot-swap, 4 HDDs

http://www.tyan.com

400 Watts single

1.3 Features

TYAN GT24B5501 (B5501G24V4H)

System

Front Panel

External Drive

Bay

System Cooling

Configuration

Form Factor

Chassis Model

Dimension (D x W x

Motherboard

Board Dimension

Gross Weight

Buttons

LEDs

I/O Ports

Type / Q'ty

Supported HDD

Interface

FAN

Type

Input Range

1U Rackmount

GT24

25.4" x 17.2" x 1.72" (645 x 436 x 43.6mm)

S5501GM3NR

EATX, 12"x13" (305x330mm)

16 kg

(1) RST / (1) NMI / (1) ID / (1) PWR w/ LED

(1) ID / (1) Warning / (3) LAN / (1) Reserved

(2) USB ports

3.5" Hot-Swap / (4)

SATA-II 3.0Gb/s

(4) 4cm fans

EPS1U

Full-range AC(100-240V)

Power Supply

Processor

Frequency

Output Watts

Efficiency

Supported CPU

Series

Socket Type / Q'ty

http://www.tyan.com

47 - 63 Hertz

400 Watts

PFC

Intel Xeon Processors 3400 Series

LGA 1156/ (1)

Thermal Design

Power (TDP)

wattage

Max up to 95W

Chipset

Memory

Expansion Slots

LAN

PCH

Super I/O

Supported DIMM

Qty

DIMM Type / Speed

Capacity

Memory channel

Memory voltage

PCI-E

Pre-install TYAN

Riser Card

Note:

Port Q'ty

Controller

Connector type

Intel 3420

Winbond W83627

(6) DIMM slots

DDR3 800/1066/1333* RDIMM/UDIMM / * limit 1

per channel for 1333MHz speed

Up to 32GB RDIMM/ 16GB UDIMM

2 Channels / Support 2 UDIMMs or 3 RDIMMs

per channel

1.5V

(2) PCI-E Gen.2 x8 slots

M2091, PCI-E x16 1U riser card (left) / M2091-R,

PCI-E x16 1U riser card (right)

x8 signal when using M2091 & M2091-R

(3)

Intel 82574L

D-Sub 15-pin

Graphic

I/O Ports

Resolution

Chipset

USB

COM

PS/2

VGA

1600x1200@75Hz

Aspeed AST2050

(4) ports (2 at front, 2 at rear)

(1) DB-9 COM port

(1) PS/2 connector (for Keyboard and Mouse)

(1) D-Sub 15-pin port

http://www.tyan.com

RJ-45

(3) ports

System

Monitoring

Server

Management

BIOS

Chipset

Voltage

Temperature

LED

Others

Onboard Chipset

AST2050 IPMI

Feature

AST2050 iKVM

Feature

Brand / ROM size

Feature

Winbond W83793G

Monitors voltage for CPU, memory, chipset &

power supply

Monitors temperature for CPU & system

environment

Fan fail LED indicator / Over temperature warning

indicator

Chassis intrusion detection / Watchdog timer

support

Onboard Aspeed AST2050

IPMI 2.0 compliant baseboard management

controller (BMC) / Supports storage over IP and

remote platform-flash / BIOS update

24-bit high quality video compression / Dual

10/100 Mb/s MAC interfaces

AMI / 4MB

Plug and Play (PnP) /PCI2.3 /WfM2.0

/SMBIOS2.3 /PXE boot / ACPI 2.0 power

management /Power on mode after power

recovery / User-configurable H/W monitoring /

Auto-configurable of hard disk types

Operating

System

Regulation

OS supported list

FCC (DoC)

CE (DoC)

C-Tick

http://www.tyan.com

Please visit our Web site for the latest update.

Class A

Yes

VCCI

Yes

Operating Temp.

Operating

Environment

RoHS RoHS 6/6 Complaint

Package

Contains

Non-operating

Temp.

In/Non-operating

Humidity

Barebone

Manual

Installation CD

Heatsink / Cooler

Rail kit

Mounting Ear

Others

Cable Power Cord

10° C ~ 35° C (50° F~ 95° F)

- 40° C ~ 70° C (-40° F ~ 158° F)

90%, non-condensing at 35° C

Yes

(1) GT24B5501 Barebone

(1) Quick Ref. Guide / (1) MB User's manual + (1)

BB User's manual

(1) TYAN installation CD

(1) LGA1156 CPU heatsink

(1) CRAL-0031, sliding rail kit for KGT24

(1) CEAR-0050, mounting ear kit for GT20/ GT24

(1) HDD screw pack

(1) CCBL-0310, US type power cord / (1)

CCBL-0300, EU type power cord

http://www.tyan.com

1.4 Standard Parts List

This section describes GT24-B5501 package contents and accessories. Open the box carefully and ensure that all components are present and undamaged. The product should arrive packaged as illustrated below.

1.4.1 Box Contents

Component Description

1U chassis,(4) hot swap HDDbays

TYAN® S5501 system board (pre-installed)

400W single Power Supply

(4) 40x28mm System FAN (pre-installed)

M1008： LED control board (pre-installed)

M1232 HDD Backplane (pre-installed)

M2091 PCI-E riser card

http://www.tyan.com

(pre-installed)

M2091-R PCI-E riser card (pre-installed)

1.4.2 Accessories

If any items are missing or appear damaged, contact your retailer or browse to TYAN The web site also provides information of other TYAN well as FAQs, compatibility lists, BIOS settings, etc.

’s website for service: http://www.tyan.com

products, as

1 x TYAN® Motherboard

Drive CD

HDD Screws

Mounting Ears & Screws

Rail Kit

Rail with Bracket x 2 Screw Pack

1 x Heatsink

Power Cables

Left to right: Europe, US

Barebone Manual &

Mainboard Manual

http://www.tyan.com

1.5 About the Product

The following overview illustrations show you the features of the product.

1.5.1 System Front View

1.5.2 System Rear View

http://www.tyan.com

1.5.3 LED Definitions

Front Panel

LED State Color Description

Power LED

NIC1

NIC2

NIC3

Warning LED

ID LED

BMC LED

Rear I/O

LAN1/LAN2

LED State Color Description

RJ-45 Linkage/ Activity(left)

RJ-45 Linkage/ Activity(Right)

NOTE: “Left” and “Right” are viewed from the rear panel.

On Green System is turned on

On Green System is under S1 Off Off Power off Blinking Green LAN active On Green LAN linked off off LAN not linked Blinking Green LAN active On Green LAN linked off off LAN not linked

Blinking Green LAN active

On Green LAN linked

off off LAN not linked

On Red

Fan fail /Over temperature

/Over voltage Off Off No failure On Blue System identified

Off Off System not identified

On Amber PSU fail

Blinking Amber PSU alert

Off Off No failure

On Green 10Mb/100Mb/1000Mb linked

Blinking Green 10Mb/100Mb/1000Mb activity

Off Off No LAN linked

On Amber 1000Mb linked/activity

On Green 100Mb linked/activity

Off Off 10Mb mode or No LAN linked

http://www.tyan.com

LAN3

LED State Color Description

RJ-45 Linkage/ Activity(left)

RJ-45 Linkage/ Activity(Right)

On Green 10Mb/100Mb/1000Mb linked Blinking Green 10Mb/100Mb/1000Mb activity Off Off No LAN linked On Amber 1000Mb linked/activity On Green 100Mb linked/activity Off Off 10Mb mode or No LAN linked

ID LED

LED State Color Description

ID LED

On Blue System identified Off Off System not identified

http://www.tyan.com

1.5.4 Motherboard (S5501) Layout

The diagram is representative of the latest board revision available at the time of publishing. The board you receive may not look exactly like the above diagram.

Jumper Legend

OPEN - Jumper OFF Without jumper cover

CLOSED - Jumper ON With jumper cover

http://www.tyan.com

1.5.5 Jumpers & Connectors

Jumper/Connector Function

J5/J7/J27/J35/J36/J37

J38/J39/J40/J41/J42

J21/J22/J25/J26 (blue)

USB1

LED1

J12

J13

J14

J16

J17

J24

J11

JP1

JP2/JP3

JP4 (S5501WGM3NR only)

4-pin Fan connector

8-pin 4056 Fan Header

USB Front Panel Header

Type-A USB Connectors

ID LED

COM2 Header

LAN3 LED Header

Chassis Intrusion Jumper

Port80 Header

Front Panel Connector

ICH SGPIO Header

PSMI Connector

Enable/Disable BMC Jumper

Clear CMOS Jumper

COM switch Jumper

Enable/Disable SAS1068E Jumper

http://www.tyan.com

1.5.6 System Block Diagram

http://www.tyan.com

+ 49 hidden pages

Tyan GT24B5501 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual