TRSYS 1N5399, 1N5399, 1N5398, 1N5398, 1N5397 Datasheet

	1N5391 THRU 1N5399
	PLASTIC SILICON RECTIFIER
	VOLTAGE - 50 to 1000 Volts CURRENT - 1.5 Amperes
FEATURES
• Low cost	DO-15

•High current capability

•High reliability

•Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound

•1.5 ampere operation at TL=70 with no thermal runaway

•Exceeds environmental standards of MIL-S-19500/228

•Low leakage

MECHANICAL DATA

Case: Molded plastic , DO-15

Terminals: Plated axial leads, solderable per MIL-STD-202,

Method 208

Polarity: Color band denotes cathode

Mounting Position: Any

Weight: 0.015 ounce, 0.4 gram

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25 ambient temperature unless otherwise specified.

Single phase, half wave, 60 Hz, resistive or inductive load.

For capacitive load, derate current by 20%.

	1N5391	1N5392	1N5393	1N5394	1N5395	1N5396	1N5397	1N5398	1N5399	UNITS
Maximum Recurrent Peak Reverse Voltage	50	100	200	300	400	500	600	800	1000	V
Maximum RMS Voltage	35	70	140	210	280	350	420	560	700	V
Maximum DC Blocking Voltage	50	100	200	300	400	500	600	800	1000	V
Maximum Average Forward Rectified					1.5					A
Current .375"(9.5mm) Lead Length at
TA=60
Peak Forward Surge Current 8.3ms single					50					A
half sine-wave superimposed on rated load
(JEDEC method)
Maximum Forward Voltage at 1.5A					1.4					V
Maximum Reverse Current Rated TA=25					5.0					A
DC Blocking Voltage TA=100					500					A
Typical Junction capacitance (Note 1)					25					PF
Typical Thermal Resistance (Note 2)					26.0					/W
Operating and Storage Temperature Range				-55 TO +150
TJ,TSTG