SmartOnline 120/208V 3-Phase Wye 60kVA Modular |
Highlights |
||||
|
|
|
|
||
3-Phase UPS System, On-line Double-Conversion |
60,000 VA (60kVA) tower UPS |
||||
with 3 hot-swappable power |
|||||
UPS for North America |
|||||
modules |
|||||
MODEL NUMBER: SU60K |
N+1 redundant modular |
||||
architecture helps ensure 100% |
|||||
|
|
|
|
||
|
|
|
|
availability |
|
|
|
|
|
1+1 parallel capability allows for |
|
|
|
|
|
system redundancy or increased |
|
|
|
|
|
capacity |
|
|
|
|
|
Low THDi saves installation costs |
|
|
|
|
|
by allowing 1:1 generator sizing |
|
|
|
|
|
||
|
|
|
|
3-phase hardwire (120/208VAC) |
|
|
|
|
|
input/output. Wide input voltage |
|
|
|
|
|
correction range |
|
|
|
|
|
(94-150VAC/163-260VAC) |
|
|
|
|
|
On-line, double-conversion |
|
|
|
|
|
operation with zero transfer time; |
|
|
|
|
|
IGBT technology; extremely |
|
Description |
efficient operation (up to 96%) |
||||
Tripp Lite's SU60K(60kVA) SmartOnline Modular 3-Phase Intelligent, True On-Line UPS System provides 100% |
Runtime is expandable via |
||||
|
system availability with N+1 modular architecture and 1+1 parallel capability. In an N+1 configuration, the SU60K |
external battery cabinet options |
|
|
||
features three self-contained, redundant 20kVA power modules that can be hot-swapped(with the load powered) |
Package Includes |
|
if maintenance is required. Connect two SU60K models in parallel(1+1 configuration) to provide fail-safe |
||
SU60K UPS System |
||
redundancy(two 60kVA models supporting a 60kVA load) or to increase capacity(two 60kVA models supporting |
||
PowerAlert Software and cabling |
||
an 120kVA load). |
||
Parallel cable (for 1+1 operation) |
||
|
||
The SU60K provides mission-critical equipment with the highest level of power protection available. Large |
Instruction manual and startup |
|
checklist |
||
capacity 60,000VA/48,000 watt UPS continually converts incoming AC power into filtered DC power, and then |
||
Warranty information |
||
resynthesizes it back into AC power with a pure sine wave. Perfectly regulated, continuous sine wave output with |
||
|
zero transfer time offers compatibility with all equipment types. The SU60K's high input power factor, advanced IGBT inverter technology and Digital Signal Processor(DSP) technology create less than 3% input Total Harmonic Distortion(THDi). With SU60K's low THDi, generators run cooler and last longer, allowing managers to save installation costs by installing a generator with a capacity equal to their equipment load(a 1:1 ratio). Extremely efficient operation(up to 96%) saves money by lowering electricity consumption. Hardwire input and output connections support a variety of permanent or PDU style power connections. SU60K features 120/208V AC, 3-phase, 4-wire(plus ground), wye input and output. It also features a wide input voltage correction range: 94-150/163-260V AC. Frequency is 50 or 60 Hz(auto-selectable). SU60K features a single small-footprint tower power module. A stand-alone hardwired external battery module(ModelsBP480V26B or BP480V40C with matching battery cabinets, available separately) is required for operation and to provide battery backup support. Additional externalBP480V26B or BP480V40C battery modules can be connected for extended runtime. Additional battery cabinets for extended runtime solutions also available; contact Tripp Lite for more information. A manual bypass breaker as well as an automatic bypass function ensure 100% availability of connected equipment by safely passing through AC power if the UPS requires maintenance. A built-in RS-232 communication port works with included PowerAlert Software to provide shutdown commands and reporting on a single server. An accessory slot accepts an optional internal SNMP card(model # SNMPWEBCARD) for remote shutdowns, reboots and more. Front panel combination LCD/LED display alerts users to a variety of UPS operational modes and conditions. The LCD display includes a real-time event log screen with up to 500 events listed. A dynamic battery management screen optimizes battery function to lengthen service life and allows cold restart of UPS during a prolonged blackout to utilize its batteries for periodic system access
or data retrieval. An Emergency Power Off button turns UPS output OFF and disables Bypass output. Built-in Emergency Power Off(EPO) dry-contact interface supports remote emergency shutdown in large facilities. A start-up service program is recommended to enhance the reliability of the installation.
Features
N+1 configuration: three self-contained, redundant 20kVA power modules can be hot-swapped(with the load powered) if maintenance is required
1+1 configuration: connect two SU60K models in parallel to provide fail-safe redundancy or to increase capacity
High input power factor, advanced IGBT inverter technology and Digital Signal Processor(DSP) technology create low input Total Harmonic Distortion(THDi)
Extremely efficient operation(up to 96%) saves money by lowering electricity consumption
True on-line, double conversion UPS with IGBT technology provides pure, sine wave AC output at all times
Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time
Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems
60,000VA/48,000W power capacity with 3-phase, hardwire 120/208VAC input/output connections
Features a wide input voltage correction range: 94-150/163-260VAC
Precision +/-1% output voltage regulation
A stand-alone hardwired external battery module(Models BP480V26B and BP480V40C, available separately from Tripp Lite) is required for operation and to provide battery backup support. Additional external battery modules can be connected for extended runtime.
Front panel combination LCD/LED display includes a real-time event log screen with up to 500 events listed
Dynamic battery management screen optimizes battery function to lengthen service life and allows cold restart of UPS
Built-in RS-232 communication port works with included PowerAlert Software to provide shutdown commands and reporting on a single server
Accessory slot accepts an optional internal SNMP card(Model SNMPWEBCARD) for remote shutdowns, reboots and more
Emergency Power Off button turns UPS output OFF and disables Bypass output
Built-in Emergency Power Off(EPO) dry-contact interface supports remote emergency shutdown in large facilities
Start-up service program is recommended to enhance the reliability of the installation
Specifications
OUTPUT
Output Volt Amp Capacity (VA) |
|
60000 |
|
|
|
Output kVA Capacity (kVA) |
|
60 |
|
|
|
Output Watt Capacity (Watts) |
|
48000 |
|
|
|
Output kW Capacity (kW) |
|
48 |
|
|
|
Power Factor |
|
0.8 |
|
|
|
Crest Factor |
|
3:1 |
|
|
|
Nominal Output Voltage(s) |
|
120/208V 3-PH Wye |
Supported |
|
|
|
|
|
|
|
|
Frequency Compatibility |
|
50 / 60 Hz |
|
|
|
Output Voltage Regulation (Line |
|
+/- 1% |
Mode) |
|
|
|
|
|
|
|
|
Output Voltage Regulation (Battery |
|
+/- 1% |
Mode) |
|
|
|
|
|
|
|
|
Output Receptacles |
|
Hardwire |
|
|
|