Tripp-Lite SU6000RT4UTFHW Catalog Page

SmartOnline 208/240 & 120V 6kVA 5.4kW

Highlights

6kVA / 6000VA / 5400W on-line

double-conversion UPS; 0.9

power factor

208/120V or 240/120V 60Hz

output; Economy mode option

6U Rack/Tower installation;

Hot-swappable power and

battery modules

USB, RS232 & EPO ports;

Network management and

contact-closure card options

Front panel LEDs with detailed

LCD monitoring and control

screen

Expandable runtime with optional

external battery packs

Hardwire input (3 wire); NEMA

5-15R, 5-15/20R & Hardwire

outputs

Package Includes

SU6000RT4UHVPM

Hot-swappable UPS Power

Module

SUPDMB6KHW Detachable PDU

with Maintenance Bypass Switch

SU6000XFMR2U Low voltage

transformer

PowerAlert Software CD

1 x 6-ft. USB Cable

1 x 6-ft. Serial Cable

4 Post Rackmount Hardware(2

sets)

Double-Conversion UPS, 6U Rack/Tower, Extended
Run, Network Card Options, USB, DB9 Serial,
Bypass Switch, Hardwire

MODEL NUMBER: SU6000RT4UTFHW

Description

Tripp Lite SU6000RT4UTFHW 6000VA / 6kVA / 5400 watt on-line, double-conversion UPS system offers

complete power protection for critical server, network and telecommunications equipment in a 6U rack/tower

compatible configuration. Full-time active power conditioning provides clean, continuous dual-conversion AC

output free of voltage fluctuations, power interruptions and line noise. Fault-tolerant auto-bypass prevents

unexpected service interruptions during UPS overload or internal fault conditions. Detachable back panel PDU

with manual bypass switch supports hot-swappable UPS power module replacement with no interruption to

connected equipment. 4U UPS power module and included 2U low-voltage transformer install in only 6 rack

spaces total(6U) with a maximum installed depth of only 21.8 in. / 55.3 cm. Maintains full-time sine wave output

within 2% of selectable 208/240V and 120V nominal at 60Hz during brownouts as low 100V and overvoltages as

high as 300V. Expandable runtime is supported with optional BP192V12-3U external battery packs. Battery

independent restart ensures automatic UPS power-up without userinteraction after lengthy power outages, even

when batteries are expired and require replacement. Double-conversion operation converts raw input from AC to

DC, then resynthesizes output power back to perfect sine wave AC with enhanced protection from harmonic

distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types. Highly efficient operation in optional economy

mode significantly reduces BTU heat output and operating energy costs. Network-grade AC surge and noise suppression. Supports detailed monitoring of

equipment load levels, self-test data and utility power conditions via built-in RS-232 and USB interfaces. Optional network management card options, such as

Tripp Lite's SNMPWEBCARD network interface and additional contact-closure communications card accessories. HID-compliant USB interface enables

integration with built-in power management and auto shutdown features of Windows and Mac OS X. Included PowerAlert monitoring software offers detailed

site power and UPS updates with support for safe auto-shutdown of connected systems as UPS batteries become depleted. Included software packages

include PowerAlert Local, PowerAlert Network Shutdown Agent and PowerAlert Network Management System for complete support for a wide variety of

application types. Supports Emergency Power Off(EPO) via built-in interface. Front panel LEDs and LCD readout with scroll controls support front-panel visual

monitoring of all major UPS for a variety of control options to support advanced UPS settings and configurations. LED / LCD display panel rotates for viewing

in rackmount or tower configurations. Hardwire input. Hardwire UPS output, plus 1 L6-30R, 8 5-15/20R and 4 5-15R outlets. External battery packs are field

replaceable and hot swappable.$250,000 Ultimate Lifetime Insurance(U.S., Canada, and Puerto Rico only)

Features

Tripp Lite SU6000RT4UTFHW 6000VA / 6kVA / 5400 watt on-line, double-conversion UPS system in a 6U rack/tower compatible configuration(4U power

module plus 2U low-voltage transformer)

Full-time active power conditioning maintains clean, continuous dual-conversion AC output free of voltage fluctuations, power interruptions and line noise

Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions

Detachable back panel PDU contains input line cord connection, output receptacles and manual bypass switch to support hot-swappable whole UPS

replacement with no interruption to connected equipment

Hardwire input(208/240V L1, L2 + G)

Hardwire high and low voltage output, plus 8 5-15/20R and 4 5-15R 120V outlets

Included rail kit supports 4U 19 inch rackmount installation in 4 post racks

Optional 2POSTRMKITHD supports installation in 2 post 19 inch racks(2 required for SU6000RT4UTFHW)

Optional 2-9USTAND supports upright tower placement(1 required for SU6000RT4UTFHW)

Maximum installed rack depth of only 21.8 in. / 55.3 cm

Maintains full-time sine wave output within 2% of selected 208/240V and 120V nominal at 60Hz in double conversion mode

Corrects brownouts to 156V at full load(100V at 50% load or less)

Corrects overvoltages to 290V at full load(300V at 90% load or less)

Double-conversion operation offers full-time AC to DC, then DC to AC conversion to maintain perfectly regulated sine wave AC output with enhanced

protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types

High efficiency ECONOMY MODE operation significantly reduces BTU heat output and operating energy costs

Network-grade AC surge and noise suppression

Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via built-in RS-232, USB and optional SNMP card slot

interfaces

UPS card slot supports one card-based network interface option, such as Tripp Lite's SNMPWEBCARD network interface or dry-contact monitoring

accessory(part # RELAYIOCARD)

Optional SNMPWEBCARD offers communications and control via secure remote web and network interfaces

Optional RELAYIOCARD supports six configurable hard contact closure outputs for custom event notification

Optional RELAYIOMINI interface module offers three configurable hard contact closure outputs for custom event notification(requires removal of USB

interface module)

HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X

Includes Free PowerAlert monitoring software packages; PowerAlert LOCAL for desktops and small business networks, PowerAlert NSA(Network

Shutdown Agent) for larger networks and PowerAlert NMS(Network Management System) for monitoring up to 250 SNMP-enabled UPS, PDU and other

networking devices

Front panel LEDs and LCD readout with scroll controls support front-panel visual monitoring of all major UPS functions with support for a variety of control

options to support advanced UPS settings and configurations

LED/LCD display panel rotates for viewing in rackmount or tower configurations

Supports Emergency Power Off(EPO) via built-in interface

Battery independent restart ensures automatic UPS power-up without userinteraction after lengthy power outages, even when batteries areexpired and

require replacement

BP192V12-3U external battery packs are field replaceable and hot swappable

Intelligent battery management system with temperature-compensated charging extends battery life

Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software(see manual)

$250,000 Ultimate Lifetime Insurance(U.S., Canada, and Puerto Rico only)