Tripp-Lite SU3000XL Catalog Page

SmartOnline 120V 3kVA 2.4kW Double-Conversion

Highlights

3000VA / 3kVA / 2400 watt

on-line double-conversion tower

UPS

110/120V +/-2% output at

50/60Hz, high efficiency

economy mode option

Expandable runtime,

Hot-swappable batteries

USB, RS232 & EPO ports;

network management card

options

Front panel status LEDs with

detailed load and battery metering

2 independently switchable

output load banks

NEMA L5-30P input; L5-30R,

5-15/20R & 5-15R outlets

Package Includes

SU3000XL Online,

Double-Conversion UPS System

PowerAlert Software and cabling

Instruction manual with warranty

information

UPS, Tower, Extended Run, Network Card Options,
USB, DB9 Serial

MODEL NUMBER: SU3000XL

Description

3000VA / 3kVA / 2400 watt on-line, double-conversion UPS system for critical server, network and

telecommunications equipment. Attractive upright tower format. Expandable battery runtime with optional

BP72V15-2U(limit 1), BP72V28RT-3U(multi-pack compatible) and BP72V18-2US(multi-pack compatible)

external battery packs. Full time sine wave 110/120V output with +/-2% voltage regulation. Uninterruptible Power

Supply(UPS) actively converts raw incoming AC power to DC, then re-converts output back to completely

regulated, filtered AC output. Operates continuously without using battery power during brownouts to 65V and overvoltages to 150V. Up to 97% efficiency in

optional economy mode saves BTU heat output and energy costs. NEMA L5-30P input plug. NEMA L5-30R, NEMA 5-15/20R and NEMA 5-15R output

receptacles. Network-grade AC surge and noise suppression. Zero transfer time between AC and battery operation. Network management interfaces include

USB port, DB9 serial port and slot for network management card options, such as Tripp Lite's SNMPWEBCARD network interface. Built-in DB9 port offers

both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability. HID-compliant USB interface enables integration with built-in power

management and auto shutdown features of Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and

mains power conditions via all network interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off(EPO) interface.

Integrated two bank PDU switching supports automated load shedding and remote-reboot of connected equipment. Multi-stage metered current monitoring

and battery charge status LEDs. Mains power and voltage regulation LEDs. Audible Alarm. Self-test. Fault-tolerant auto-bypass mode. Field replaceable, hot

swappable internal batteries and external battery packs.$250,000 Ultimate Lifetime Insurance(U.S., Canada, and Puerto Rico only).

Features

SmartOnline high-performance UPS system is ideal for critical voice, data, medical and industrial network applications

Optional economy-mode operation with 97% efficiency for reduced power consumption and cooler operation

Economy mode is schedulable via PowerAlert UPS management software for daily or weekly hours of operation to enable precision output during peak

operating hours and high efficiency, low BTU emission operation during off-peak times

Maintains continuous operation through blackouts, voltage fluctuations and surges

On-line, double-conversion mode provides perfectly regulated sine wave output within 2% of 110/120V(user selectable) with zero transfer time

Supports operation at 50/60Hz(auto-sensing)

Removes harmonic distortion, fast electrical impulses, frequency variations and other hard to solve power problems not addressed by other UPS types

Corrects line voltage conditions as low as 65V and as high as 150V to within 2% of selected nominal voltage

Standard internal battery set offers 14 minutes runtime at half load(1200W) and 5 minutes at full load(2400W)

Expandable battery runtime with optional BP72V15-2U(limit 1), BP72V28RT-3U(multi-pack compatible) and BP72V18-2US(multi-pack compatible)

external battery packs

Intelligent battery management system extends battery life

Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software(see manual)

Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions

Network interfaces support simultaneous communications via built-in USB, DB9 serial / contact-closure and slot for network management card options,

such as Tripp Lite's SNMPWEBCARD network interface

HID compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Included

PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of

additional servers over IP

UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery

capacity, AC line frequency, timed inverter shutoff, activate self-test, load bank output power control, remote reboot and UPS nominal voltage adjustment

Built-in Emergency Power Off(EPO) interface with cable

NEMA L5-30P input plug / NEMA 5-15R, 5-15/20R & L5-30R output receptacles

Integrated 2 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual load banks

Front panel LEDs offer current monitoring and battery charge level information

Network grade AC, TEL/DSL or ethernet line surge suppression

Field replaceable, hot swappable internal batteries and external battery packs

$250,000 Ultimate Lifetime Insurance(U.S., Canada, and Puerto Rico only)

Specifications

OUTPUT

Output Volt Amp Capacity (VA) 3000

Output kVA Capacity (kVA) 3

Output Watt Capacity (Watts) 2400

Output kW Capacity (kW) 2.4

OVERLOAD CAPACITY: Supports inverter operation up to 105% load continuously, 125% load for 3 minutes; 150%

Output Capacity Details

Power Factor 0.8

Crest Factor 3:1

Nominal Output Voltage(s)
Supported

Frequency Compatibility 50 / 60 Hz

Frequency Compatibility Details Output frequency matches input nominal on startup, defaults to 60 Hz on cold-start

Output Voltage Regulation (Line
Mode)

load for 30 seconds and >150% load for 0.5 seconds before switching to BYPASS (when bypass input voltage and
frequency are WITHIN bypass limits) or SHUTDOWN (when bypass input voltage or frequency are OUTSIDE
bypass limits)

110V; 120V

+/- 2%