Tripp-Lite SU2200RTXLCD2U Catalog Page

SmartOnline 120V 2.2kVA 1.8kW

Highlights

2200VA / 2.2kVA / 1800W on-line

double-conversion 2U rack /

tower UPS

100/110/120/127V 50/60Hz

output; High efficiency economy

mode option

Interactive LCD with 9 selectable

screens of UPS and site power

data

Expandable runtime, Hot-swap

batteries, 19 in / 48.3cm depth

USB, RS232 & EPO ports, slot

for network management card

options

2 independently switched load

banks

NEMA 5-20P input; 6 NEMA

5-15/20R & 1 L5-20R outlets

This product is ENERGY STAR

qualified for its ability to save

customers money while

helping to protect the

environment

Package Includes

SU2200RTXLCD2U UPS System

PowerAlert Software with USB,

Serial & EPO cabling

4 post rackmount installation kit

Instruction manual

Double-Conversion UPS, 2U, Extended Run,
Network Card Slot, LCD, USB, DB9

MODEL NUMBER: SU2200RTXLCD2U

Description

Tripp Lite Smart Online UPS systems offer high performance power protection ideal for critical server and

network equipment in datacenters, computer rooms and network closets. Online, double-conversion

Uninterruptible Power Supply(UPS) with Transformerless, IGBT technology maintains perfectly regulated output

power by continuously converting raw AC input to DC, then re-converting output back to AC. Fully regulated sine

wave AC output with +/-2% voltage regulation powers network equipment continuously, even during severe

brownouts and overvoltages, all without depleting UPS battery reserves. Maintains battery-derived AC output

during power failures with zero transfer time. Extended runtime options available. Interactive LCD interface

reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and

configuration options. Highly efficient operation in optional economy mode saves BTU heat output and energy

costs. Network management interfaces support communications via USB, RS-232, contact-closure and slot for

network management interface options, such as Tripp Lite's SNMPWEBCARD network interface. Built-in DB9

port offers both enhanced RS-232 data and basic contact closure monitoring ability. HID-compliant USB interface enables integration with built-in power

management and auto shutdown features of Windows and Mac OS X. Includes PowerAlert monitoring software and complete cabling. Emergency Power

Off(EPO) interface. LED display reports UPS operating mode, line power availability, battery mode operation, inverter operation, ECO mode status and output

power availability. LED/LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary

alarm-cancel and silent-mode LCD configuration options. Programmable self-test. Fault-tolerant auto-bypass mode. Battery independent restart.

Field-replaceable, hot-swappable internal batteries and external battery packs.

Features

Tripp Lite SU2200RTXLCD2U 2200VA / 2.2kVA / 1800W on-line, double-conversion 2U rack / tower UPS

Transformerless, IGBT technology

Selectable 100/110/120/127V output(120V factory preset)

NEMA 5-20P input, 6 NEMA 5-15/20R and 1 L5-20R outlets

Two switched 3-outlet load banks support remote reboot or programmable load shedding options

Supports 2% output voltage regulation and zero transfer time in double conversion mode

Economy mode option offers enhanced efficiency, reduced power consumption and lower BTU emissions

12 minutes runtime at 50% load(900W) and 4 minutes at 100% load(1800W) with internal batteries

BP48V24-2U(limit 1), BP48V60RT-3U(multi-pack compatible) and BP48V27-2US(multi-pack compatible) external battery packs available(some

configurations require Tripp Lite External Battery Configuration Software)

Intelligent battery management system with temperature-compensated charging extends battery life

LCD interface reports operating mode plus 9 selectable screens of UPS data(Load% & kW, Load% & kVA, Power factor, Input volts & Hz, Output volts &

Hz, Battery volts and charge%, Minutes runtime, Capacity remaining, Kw/hr. consumption)

LCD interface also supports 16 screens of UPS configuration and setup options

4 post installation hardware included, Optional 2POSTRMKITWM enables 2 post rack installation, Optional 2-9USTAND enables tower placement

Single line TEL / Network surge suppression

Electronic bypass maintains utility output during a variety of UPS fault conditions

Battery independent restart ensures automatic UPS power-up without user interaction after lengthy power outages, even when batteries are expired and

require replacement

Frequency regulation / conversion mode offers generator-compatible frequency correction or conversion of frequency from 50 to 60Hz or 60 to 50Hz

USB, RS-232, contact-closure and slot for network management card options, such as Tripp Lite's SNMPWEBCARD network interface

HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X

Included PowerAlert UPS monitoring software

Specifications

OUTPUT

Output Volt Amp Capacity (VA) 2200

Output kVA Capacity (kVA) 2.2

Output Watt Capacity (Watts) 1800

Output kW Capacity (kW) 1.8

ON LINE MODE: Maximum output capacity is reduced to 1620 watts at 115V nominal and 1440 watts at 100V
nominal; FREQUENCY REGULATION / CONVERSION MODE: Maximum output ratings are reduced in frequency

Output Capacity Details

Power Factor 0.82

Crest Factor 3:1

Nominal Output Voltage(s)
Supported

Nominal Voltage Details 120V factory-default nominal voltage

Frequency Compatibility 50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion

Frequency Compatibility Details

regulation / conversion mode (127/120V 1260 watts / 115V 1134 watts / 110V 1071 watts / 100V 1008 watts)
OVERLOAD CAPACITY: Supports inverter operation up to 105% load continuously, 125% load for 3 minutes; 150%
load for 30 seconds and >150% load for 0.5 seconds before switching to BYPASS (when bypass input voltage and
frequency are WITHIN bypass limits) or SHUTDOWN (when bypass input voltage or frequency are OUTSIDE
bypass limits)

100V; 110V; 115V; 120V; 127V

ON LINE MODE: Output frequency is automatically configured to match nominal input frequency on startup; Output
matches input frequency when +/-5Hz of nominal; Output is regulated to +/-0.05Hz when input frequency exceeds
+/-5Hz of nominal. UPS switches to battery mode when input frequency is below 40Hz or above 70Hz.
FREQUENCY REGULATION / CONVERSION MODE: Output is regulated to +/-0.05Hz of selected output frequency
input is 40 to 70Hz; UPS switches to battery mode when input frequency is below 40Hz or above 70Hz. BATTERY
MODE: Output is regulated to +/-0.05Hz.