Tripp Lite SU2200RTXL2UA User Manual

Download

Page 1

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

E-mail: saleshelp@tripplite.com

Model #: SU2200RTXL2UA

SmartOnline Expandable 2U Rack / Tower UPS System - On-line, double-conversion, sine wave UPS with PDU switching, current monitoring and fault tolerant auto-bypass

Highlights

2200VA / 2.2kVA on-line, double-conversion, extended-run 2U rack / tower

UPS

Zero transfer time, on-line, double-conversion and economy-mode operation

supported

Maintains sine-wave 110/120V +/-2% output during overvoltages to 138 and

brownouts as low as 65V (50/60Hz auto-sensing)

Simultaneous communications via HID compliant USB port, serial port,

SNMP/Web card slot and EPO interface

Fault tolerant auto-bypass mode, current monitoring and switched PDU control

via 2 switchable output load banks

Input: NEMA 5-20P (120V) / Output: 6 NEMA 5-15/20R and 1 NEMA L5-20R

(120V)

2 year product warranty / $250,000 Ultimate Lifetime Insurance (USA &

Canada only)

Description

2200VA on-line, double-conversion UPS system for critical server, network and telecommunications equipment. 2U rackmount form factor with an

installed depth of only 19 in. Expandable battery runtime with optional BP48V24-2U and BP48V60RT-3U external battery packs. Full-time sine wave

110 or 120V +/-2% output. Online, double-conversion Uninterruptible Power Supply (UPS) actively converts raw incoming AC power to DC, then

re-converts output back to completely regulated, filtered AC output. Operates continuously without using battery power during brownouts to 65V and

overvoltages to 138V. NEMA 5-20P input plug; NEMA 5-15/20R and NEMA L5-20R output receptacles. Network-grade AC surge and noise

suppression. Zero transfer time between AC and battery operation. Highly efficient operation in optional economy mode setting, saving BTU heat

output and energy costs. Network management interfaces support simultaneous communications via USB port, DB9 serial port and

SNMPWEBCARD slot. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows

and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network

interfaces. Includes PowerAlert monitoring software and complete cabling. Emergency Power Off (EPO) interface. Integrated 2-bank PDU switching

supports load shedding and remote-reboot of connected equipment. 3-stage metered current monitoring and battery charge status LEDs. LED

display panel easily rotates for better viewing in rackmount or tower configurations. Dataline surge suppression for dialup, DSL or network Ethernet

connection. Utility power and voltage regulation LEDs. Audible alarm. Self-test. Fault-tolerant auto-bypass mode. 4-post rackmount accessories

included; 2-9USTAND tower kit and 2POSTRMKITWM two post rack & wallmount accessories available. Field-replaceable, hot-swappable internal

batteries and external battery packs. Attractive all-black color scheme. 2-year warranty and $250,000 connected equipment insurance; extended

warranty and service contracts available

Applications

Ideal for protection of critical 120V equipment in server rooms, internetworking closets and telecommunications systems in rackmount or tower applications. Common applications include corporate or departmental servers, workstations, hubs, routers, bridges, CAD/CAM workstations, concentrators, IP telephony and traditional PBX switching systems.

Page 2

Package Includes

SU2200RTXL2Ua On-line Double-Conversion UPS System PowerAlert Software and cabling Mounting hardware for 4 post rack enclosures Instruction manual with warranty information

Features

SmartOnline high performance UPS system is ideal for critical voice, data, medical and industrial network applications True on-line, double-conversion UPS provides perfectly regulated sine wave output within 2% of 110/120V (user selectable) under all usage conditions Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time Removes harmonic distortion, fast electrical impulses, frequency variations and other hard to solve power problems not addressed by other UPS types Corrects line voltage conditions as low as 65V and as high as 138V back to selectable 110/120V (+/-2%) values Standard internal battery set offers 14 minutes runtime at half load (800W) and 4.5 minutes at full load (1600W) Extended Runtime with BP48V24-2U (limit 1) or BP48V60RT3U (multi-pack compatible) external battery packs Compact rackmount form factor installs using only 2 rack spaces (2U) with a maximum installed depth of only 19 inches Ships with all mounting accessories for 4 post rackmount installation Optional 2POSTRMKITWM enables 2 post rackmount or wallmount installation Optional 2-9USTAND accessory enables small-footprint upright tower placement Fault tolerant auto-bypass maintains continuous utility output to connected equipment, even in cases where the UPS suffers internal failure and requires maintenance Network interfaces support simultaneous communications via built-in USB, DB9 serial and SNMPWEBCARD slot HID compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number of additional servers over IP UPS interface supports on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery capacity, AC line frequency, timed inverter sutoff, activate self-test, load bank output power control and remote reboot, UPS nominal voltage adjustment and UPS line to battery power voltage setpoints Built-in Emergency Power Off (EPO) interface with cable NEMA 5-20P input plug (user-installable NEMA 5-15P replacement plug included)/NEMA 5-15/20R & NEMA L5-20R output receptacles Integrated 2 bank switched PDU enables remote outlet management for load shedding or remote reboot of individual load banks (each bank has 3 outlets) Front panel LEDs offer current monitoring and battery charge level information UPS ships fully assembled in full compliance with DOT regulations, no time consuming connection of internal batteries by user required Single line TEL/DSL or network ethernet line surge suppression 2 year manufacturer's product warranty, $250,000 Ultimate Lifetime Insurance

Specifications

SYSTEM OVERVIEW

Voltage compatibility

120V AC (110/120V)

Frequency compatibility

50/60 Hz compatible (auto-sensing)

OUTPUT

Output VA 2200

Output watts 1600

Output nominal voltage

120V AC (110/120V)

Output voltage regulation

Maintains full-time sine wave output within 2% of selected nominal, less than 3% total harmonic distortion (linear load) / 5% total harmonic distortion (computer load) (Less than 5% THD on-line and on-battery)

Output frequency regulation

Regulates line frequency to 50/60Hz +/- 0.05Hz

Outlet quantity / type

6 NEMA 5-15/20R, 1 NEMA L5-20R

Page 3

Customized load management receptacles

2 controllable load banks support load shedding and remote reboot on demand of locked network devices (each load bank has 3 outlets)

Overload protection

Via 30A input breaker

INPUT

Maximum input amps

16A

Input connection type

NEMA 5-20P (NEMA 5-15P also included)

Input cord length 10ft / 3m

Recommended Electrical Service

120V 20A dedicated circuit

BATTERY

Full load runtime 4.5 minutes with internal batteries (1600w)

Half load runtime 14 minutes with internal batteries (800w)

Expandable battery runtime

Supports extended runtime with optional external battery pack BP48V24-2U (limit 1) and BP48V60RT-3U (multi-pack compatible)

DC system voltage 48VDC

Typical battery lifespan

3-6 years, depending on usage

Battery recharge rate

Less than 5 hours to 90%

Replacement Battery Cartridge

RBC94-2U

VOLTAGE REGULATION

Voltage regulation description

On-line, double-conversion power conditioning maintains output within 2% of 110/120 volts at all times

Overvoltage correction

Maintains output of selected nominal +/-2% during overvoltages to 138V AC

Brownout correction

Maintains output of selected nominal +/-2% during undervoltages to 65V AC (at loads greater than 70% undervoltage correction extends to 80V)

LEDS ALARMS & SWITCHES

Front panel LEDs LED STATUS DISPLAY: line power (green), online (green), bypass (yellow), on battery (green), overload (red), battery

low (yellow) - 4 LED LOAD / BATTERY LEVEL DISPLAY (100%, 75%, 50%, 25%). LED display panel easily rotates for better viewing in rackmount or tower configurations.

Alarms Multi-function audible alarm with distinctive ring patterns offer notification of backup operation (2 seconds on / 0.5 seconds

off), low battery warning (1.25 seconds on / 0.5 seconds off), overload (sounds continuously), UPS fault (4.2 seconds on / 1 second off), input voltage out of frequency (2.1 seconds on / 0.14 seconds off) and high input voltage (2.1 seconds on

0.07 seconds off)

Switches Includes power off/on switch to enable system turn on (press ON switch), UPS battery test (press ON switch during normal

AC operation), buzzer silence (press ON switch during battery operation) and OFF (press OFF switch) - all switch functions require that the switch be pressed and held for longer than 2 seconds, but less than 4 seconds

SURGE / NOISE SUPPRESSION

AC surge suppression

570 joules

AC suppression response time

Instantaneous

Dataline suppression

Set of 8 wire RJ style interface jacks offer surge suppression for network ethernet or TEL/DSL connection. Pins 1,2,3 and 6 offer ethernet protection starting at 7.5V and the center two wires, pins 4 & 5, offer TEL/DSL line suppression starting at 260V

EMI / RFI AC noise suppression

Yes

PHYSICAL

Page 4

Shipping weight (lbs)

57.3

Shipping weight (kg)

Shipping Dimensions (HWD/in)

9.75 x 20.25 x 24

Shipping Dimensions (HWD/cm)

24.8 x 51.4 x 61

Unit weight (lbs) 47.4

Unit weight (kg) 21.5

Unit Dimensions (HWD/in)

3.5 x 17.5 x 19

Unit Dimensions (HWD/cm)

8.9 x 44.4 x 48.3

Material of construction

Steel

Form factors supported

Rack (2U)

Cooling method Built-in cooling fan

Battery Access User replaceable, hot swap battery replacement supported via front access panel

ENVIRONMENTAL

Relative Humidity 0 to 95%, non-condensing

Storage Temperature

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

Operating Temperature

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

Line mode BTU/hr. (Max.)

812.9 BTU/hr. (worst case)

Battery mode BTU/hr. (Max.)

885.6 BTU/hr. (worst case)

COMMUNICATIONS

Network monitoring port

Includes USB and DB9 serial ports. Built-in DB9 port offers both enhanced RS-232 enabled monitoring data, plus contact closure monitoring ability. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X.

Software and cabling included

Yes, includes PowerAlert software CD-ROM and complete cabling

SNMP compatibility Yes, includes slot for optional SNMPWEBCARD accessory (#SNMPWEBCARD)

WatchDog compatibility

Yes, compatible with Tripp Lite's Watchdog system service to restore operation to locked equipment through soft reboot of application / OS or hard power off/on reboot of connected equipmentideal for unattended kiosk applications

LINE / BATTERY TRANSFER

Transfer time from line power to battery mode

Zero, online UPS continuously converts incoming AC to DC, then back to AC. When commercial power is interrupted, UPS maintains continuous output from battery reserves with absolutely no disruption in output AC power.

Low voltage transfer to battery power

Maintains continuous operation during undervoltages as low as 65V (80V at load levels over 70%). Below this switchover point, output is supported from battery derived AC power.

High voltage transfer to battery power

Maintains continuous operation without using battery power during overvoltages to 138V. Above this point, output is supported from battery derived AC power.

SPECIAL FEATURES

EPO port Supports "Emergency Power Off" via dedicated built-in EPO jack

Page 5

Cold Start Yes, inverter can be "cold started" to enable temporary AC output during a power failure

Appearance Attractive black steel rackmount housing

BATTERY PACK ACCESSORY (optional)

Battery Pack Accessory (optional)

BP48V24-2U (limit 1), BP48V60RT3U (multi-pack compatible)

CERTIFICATIONS

Certifications Tested to UL1778 (USA), CSA C22.2 No. 107.3 (Canada), NOM (Mexico), Class A (emissions), FCC Part 68 / Industry

Canada

WARRANTY

Product Warranty Period

2 year product warranty

Connected Equipment Coverage

$250,000 connected equipment insurance (USA and Canada only)

Optional Coverage 3-5 year warranties, plus next day and on-site warranty coverage available for select opportunities. Contact Tripp Lite for

additional information.