Tripp Lite SU20K3, SU203XR5 User Manual

Download

Tripp Lite

1111 West 35th Street

Chicago, IL 60609 USA

Telephone: +(773) 869 1234

E-mail: saleshelp@tripplite.com

Model #: SU20K3/3XR5

SmartOnline 3-Phase UPS System - 3-Phase on-line, double-conversion protection for mission critical applications

Highlights

20,000 VA (20kVA) EXTENDED RUNTIME tower UPS with internal batteries

Saves valuable space: power and battery components combined into a single

small-footprint module

Simplifies runtime scalability: convenient front-panel battery access for

expandable runtime with additional internal battery packs

3-phase hardwire input and output (120/208VAC). Wide input voltage

correction range (88 - 144V AC / 166 - 250V AC)

IGBT technology and zero transfer time, on-line, double-conversion operation

3 communication ports, SNMP card slot and EPO jack

Description

Tripp Lite's SU20K3/3XR5 20kVA SmartOnline 3-Phase Intelligent, True On-Line Extended Runtime UPS System has been redesigned to save

valuable space and simplify runtime scalability. Power and battery components are combined into a single, small-footprint module (the smallest in its

class). A robust internal battery runtime capability can be easily extended by installing additional optional internal battery packs through the

convenient front panel access door. The SU20K3/3XR5 features a large internal battery compartment that contains more internal batteries than the

equivalent standard-run model (SU20K3/3) and more space to add additional optional internal battery packs to extend runtime.

The SU20K3/3XR5 provides mission-critical equipment with the highest level of power protection available. Large capacity 20,000VA/16,000 watt

UPS continually converts incoming AC power into filtered DC power, and then resynthesizes it back into AC power with a pure sine wave. Perfectly

regulated, continuous sine wave output with zero transfer time offers compatibility with all equipment types. IGBT inverter technology produces

output power with <3% THD (total harmonic distortion), allowing connected equipment to perform at its peak. A 3:1 crest factor safely supports a

variety of equipment, even those with wildly-fluctuating power demands. Extremely efficient operation saves money by lowering electricity

consumption. Hardwire input and output connections support a variety of permanent or PDU style power connections. SU20K3/3XR5 features

120/208V AC, 3-phase, 4-wire (plus ground), wye input and output. It also features a wide input voltage correction range: 88-144/166-250V AC.

Frequency is 50 or 60 Hz (auto-selectable). SU20K3/3XR5 includes internal power and battery components in a single small-footprint tower module.

Battery support can be extended with additional internal battery packs. A manual bypass switch as well as an automatic bypass function ensure

100% availability of connected equipment by safely passing through AC power when the UPS requires maintenance. Three built-in communication

ports (RS-232, contact closure and AS-400) work with included PowerAlert Software to simultaneously provide shutdown commands and reporting

on multiple servers without the need for costly accessories. An accessory slot accepts an optional internal SNMP card (model # SNMPWEBCARD)

for remote shutdowns, reboots and more. A Battery Start Switch allows cold restart of UPS during a prolonged blackout to utilize its batteries for

periodic system access or data retrieval. An Emergency Power Off button turns UPS output OFF and disables Bypass output. Built-in Emergency

Power Off (EPO) interface supports remote emergency shutdown in large facilities. Front panel combination LCD/LED display alerts users to a

variety of UPS operational modes and conditions. A 1-year limited repair warranty is included. A start-up service program is recommended to enhance

the reliability of the installation.

Applications

Ideal for protecting critical 120/208V equipment in computing, networking or telecommunications environments.

Package Includes

SU20K3/3XR5 UPS System (power and battery components in one module)

PowerAlert Software and cabling

Warranty information

Instruction manual

Features

Large internal battery compartment contains more internal batteries than the equivalent standard-run model (SU20K3/3) and more space to

add additional optional internal battery packs to extend runtime.

Saves valuable space: power and battery components combined into a single small-footprint module

Simplifies runtime scalability: convenient front-panel battery access for expandable runtime with additional internal battery packs

True on-line, double conversion UPS with IGBT technology provides pure, sine wave AC output at all times

Maintains continuous operation through blackouts, voltage fluctuations and surges with zero transfer time

Removes harmonic distortion, electrical impulses, frequency variations and other hard-to-solve power problems

20,000VA/16,000 watt power capacity with 3-phase, hardwire 120/208V AC input/output connections

Features a wide input voltage correction range: 88 - 144/166 - 250V AC

Included internal batteries provide 42 minutes runtime at half load (8,000 watts) and 17 minutes runtime at full load (16,000 watts)

3:1 crest factor safely supports a variety of equipment, even those with wildly-fluctuating power demands

Extend runtime by installing optional internal battery packs (model # SURBC2030) through the front panel access door. SU20K3/3XR5

includes 5 internal battery packs and accepts 3 additional internal battery packs. A standalone battery module compartment with a 4 battery

pack capacity and daisy-chain capability (model # SUBF2030) is available to further extend runtime.

3 communication ports (RS-232, contact closure and AS-400)

Slot for optional SNMP card (model # SNMPWEBCARD)

Manual bypass switch as well as an automatic bypass function ensures 100% availability of connected equipment by safely passing

through AC power when the UPS system requires maintenance

Battery Start Switch allows cold restart of UPS during a prolonged blackout to utilize its batteries for periodic system access or data retrieval

Emergency Power Off button turns UPS output OFF and disables Bypass output

PowerAlert Universal UPS Power Management Software and 6 ft. communication cable included

1-year limited repair warranty

Start-up service program is recommended to enhance the reliability of the installation

Built-in Emergency Power Off (EPO) interface supports remote emergency shutdown in large facilities

Combination LED/LCD display

Specifications

SYSTEM OVERVIEW

Voltage compatibility

120/208V AC, 3-phase, 4-wire (plus ground), wye

Frequency compatibility

50/60 Hz (auto-selectable)

OUTPUT

Output VA 20,000 (20kVA)

Output watts 16,000

Output nominal voltage

120/208V AC, 3-phase, 4-wire (plus ground), wye

Output voltage regulation

Maintains pure sine wave output at all times, regulated within 2% of nominal output voltage, less than 3% total harmonic distortion (using IGBT Inverter)

Output frequency regulation

Regulates line frequency at 50 or 60 Hz, +/- 3 Hz

Outlet quantity / type

Hardwire

INPUT

Maximum input amps

60A (per phase, online)

Input connection type

Hardwire

Recommended Electrical Service

120/208V AC (3-Phase, 4 Wire, wye)

BATTERY

Full load runtime Included internal batteries: 17 min. (16,000 watts). Runtime can be extended with additional internal battery packs (model #

SURBC2030).

Half load runtime Included internal batteries: 42 min. (8,000 watts). Runtime can be extended with additional internal battery packs (model #

SURBC2030).

Expandable battery runtime

Supports extended runtime with optional internal battery packs (model # SURBC2030). Accepts 3 additional internal battery packs. Standalone external battery module (SUBF2030) also available.

DC system voltage 240V DC

Typical battery lifespan

3 - 6 years, depending on usage

Battery recharge rate

2 - 4 hours to 90%

VOLTAGE REGULATION

Voltage regulation description

On-line, double-conversion process gives this UPS the ability to maintain output voltage within +/-2% of nominal voltage at all times

Overvoltage correction

Maintains continuous operation without using battery power during overvoltages to 144 / 250V AC (3-Phase, 4-Wire, wye), reducing output within 2% of nominal

Brownout correction

Maintains continuous operation without using battery power during brownout / undervoltage conditions to 88 / 166V AC (3-Phase, 4-Wire, wye)

LEDS ALARMS & SWITCHES

Front panel LEDs 7 LED DISPLAY: AC input, bypass input, AC-DC charger, DC-AC inverter, AC output, bypass operation and battery

operation. SELECTABLE LCD DISPLAY: indicates a wide range of UPS operational and fault/warning conditions including operational mode, alarm/shutdown conditions, input/output voltage/frequency, battery voltage, load percentage and more.

Alarms Alarms warn against a variety of operational conditions: low battery, overload, shutdown, bypass and more

Switches "ON" button turns UPS's inverter ON. "OFF" button turns UPS's inverter OFF. "Select" Button browses through items

displayed on LCD screen. "Enter" button selects items displayed on LCD screen. "Select" and "Enter" buttons used simultaneously mute UPS alarms. "Battery Start" Switch cold starts the inverter. "Emergency Power Off" button turns UPS output OFF and disables Bypass output. "Manual Bypass" switch bypasses the UPS's inverter during maintenance.

SURGE / NOISE SUPPRESSION

AC surge suppression

480 joules

AC suppression response time

Instantaneous

EMI / RFI AC noise suppression

Yes

PHYSICAL

Shipping weight (lbs)

1152

Shipping weight (kg)

523

Shipping Dimensions (HWD/in)

61.5 x 31 x 44.5

Shipping Dimensions (HWD/cm)

156.2 x 78.7 x 113

Unit weight (lbs) 935

Unit weight (kg) 424

Unit Dimensions (HWD/in)

48.5 x 19.3 x 36

Unit Dimensions (HWD/cm)

123.2 x 49 x 91.4

Material of construction

Steel

Form factors supported

Tower

Cooling method Built-in cooling fans

Battery Access Front panel internal battery access

ENVIRONMENTAL

Relative Humidity 5 to 95%, non-condensing

Storage Temperature

-36 to +104 degrees Fahrenheit / -20 to +40 degrees Celsius

Operating Temperature

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

COMMUNICATIONS

Network monitoring port

Includes 3 built-in communications ports (RS-232, contact closure and AS-400)

Software and cabling included

Includes PowerAlert UPS monitoring software for all common network and standalone operating systems. Cabling included.

SNMP compatibility

Built-in accessory slot accommodates internal SNMP card (model # SNMPWEBCARD) and other network accessories

LINE / BATTERY TRANSFER

Transfer time from line power to battery mode

Zero transfer time. True on-line UPS continuously converts incoming AC to DC, then back to AC. When line power is interrupted, UPS maintains continuous output from battery reserves with absolutely no disruption in output AC power.

Low voltage transfer to battery power

Maintains continuous operation during undervoltages as low as 88 / 166V AC (3-Phase, 4-Wire, wye). Below this point, output is maintained utilizing battery reserves.

High voltage transfer to battery power

Maintains continuous operation during overvoltages as high as 144 / 250V AC (3-Phase, 4-Wire, wye). Above this point, output is maintained utilizing battery reserves.

SPECIAL FEATURES

EPO port Includes dedicated EPO (emergency power off) interface and cabling

Cold Start Yes, inverter can be cold-started (with use of Battery Start Switch) to enable temporary AC output during a power failure

Appearance Attractive black steel tower housing

BATTERY PACK ACCESSORY (optional)

Battery Pack Accessory (optional)

SURBC2030 (optional internal battery pack) and SUBF2030 (optional standalone external battery module)

CERTIFICATIONS

Certifications Tested to UL (USA), cUL (Canada), NOM (Mexico), Class A (Emissions)

WARRANTY

Product Warranty Period

1-year limited repair warranty is included. Start-up service program is recommended.

Tripp Lite SU20K3, SU203XR5 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual