Tripp Lite SU16KRT User Manual

SmartOnline 208/240V 16kVA 14.4kW DoubleConversion UPS, N+1, 12U, Network Card Options, USB, DB9, Bypass, L6-30R, C19

MODEL NUMBER: SU16KRT

Description

Tripp Lite SU16KRT 16,000VA / 16kVA / 14,400 watt online, double-conversion UPS system offers complete power protection for critical server, network and telecommunications equipment in a 12U rack/tower configuration. This system delivers complete N+1 redundancy when used at loads up to 8kVA, and non-redundant operation at loads between 8 and 16kVA. Fault-tolerant auto-bypass prevents unexpected service interruptions during UPS overload or internal fault conditions. Included parallel PDU with manual bypass switching enables hot-swappable replacement of all major UPS system components in both N+1 and combined operating modes. Enhanced availability, fault tolerance and simple hot-swap replacement options make this UPS ideal for advanced networking applications in data centers, computer rooms, network closets and rugged industrial locations.

Features

●Tripp Lite SU16KRT 16kVA, 16,000VA / 14,400 watt on-line, double-conversion UPS system in 12U total rack/tower configuration

●Unique configuration offers 16kVA non-redundant operation and automatic N+1 redundancy at load levels of 8kVA and under

●Included Parallel PDU with manual bypass switch enables hot-swap replacement of power modules at any supported load level

●Hardwire input; 2 L6-30R and 8 C19 outlets

●Maintains full-time sine wave output within 2% of selectable 200/208/220/230/240V nominal

●Supports 50/60Hz operation for worldwide frequency compatibility

●Expandable runtime with optional external battery packs

●Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX,

Highlights

●16kVA / 16,000VA / 14,400W on-line double-conversion UPS; 0.9 power factor

●200/208/220/230/240V 50/60Hz output

●Hot-swap power and battery modules, N+1 fault tolerance at loads up to 8kVA

●USB, RS232 & EPO ports; slot for network management card options

●Front panel LEDs with detailed LCD monitoring and control screen

●Expandable runtime with optional external battery packs

●Hardwire input (3 wire); L6-30R & C19 outlets

Package Includes

●Two SU8000RT3UPM UPS power modules

●Two BP240V10RT3U battery packs

●SUPDMB20K parallel PDU with Bypass switch

●4 post rackmount installation rails

●USB, DB9 & EPO cables

1 / 6

SNMPWEBCARD, MODBUSCARD and RELAYIOCARD (NOTE: Applications utilizing any supported network management card option, require the installation of two of the same model network card – install one card per included UPS power module)

●Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)

●Battery independent restart ensures automatic UPS power-up after lengthy power outages, even with expired batteries

●Intelligent battery management system with temperature-compensated charging extends battery life

●HID-compliant USB interface

●USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert

●Optional 2POSTRMKITHD supports installation in 2 post 19 inch racks (4 required)

●Optional 2-9USTAND supports upright tower placement (2 required)

●Supports Emergency Power Off (EPO) via built-in interface

●Front panel LEDs and LCD readout with scroll controls

●LED / LCD display panel rotates for viewing in rackmount or tower configurations

●External battery packs are field replaceable and hot swappable

●Frequency conversion mode enables conversion of 60Hz to 50Hz or 50Hz to 60Hz (no de-rating)

Specifications

OVERVIEW

UPC Code	037332158222
UPS Type	On-Line
INPUT
Rated input current (Maximum Load)	92A (200V), 88.4A (208V), 76.6A (240V)
Nominal Input Voltage(s) Supported	200V AC; 208V AC; 240V AC
UPS Input Connection Type	Hardwire
UPS Input Connection Description	3 wire single phase input (L1, L2, G)
Recommended Electrical Service	100A @ 200V, 208V, or 240V (L1, L2, G)
Input Phase	Single-Phase
OUTPUT
Output Volt Amp Capacity (VA)	16000
Output kVA Capacity (kVA)	16
Output Watt Capacity (Watts)	14400

2 / 6

	Output kW Capacity (kW)	14.4
	Output Capacity Details	Supports up to 105% load continuously in double conversion mode, 106 to 125% for 1 minute, 126% to 150% for 30
		seconds; Loads over 150% trigger immediate bypass mode operation to support loads directly from mains power;
		Double conversion mode is automatically restored as load levels are reduced to 95% or less
	Power Factor	0.9
	Crest Factor	3:1
	Nominal Voltage Details	Voltage selection via front panel LCD interface
	Frequency Compatibility	50 / 60 Hz; Supports 50 to 60 Hz and 60 to 50 Hz conversion
	Frequency Compatibility Details	Output frequency matches input nominal on startup; Frequency conversion mode enables conversion of 60Hz to
		50Hz or 50Hz to 60Hz (no de-rating)
	Output Voltage Regulation (Line	+/- 2%
	Mode)
	Output Voltage Regulation (Battery	+/- 2%
	Mode)
	Output Circuit Breakers	Two built-in 30A breakers protect one L6-30R outlet each; Eight built-in 20A breakers protect one C19 outlet each
	Output AC Waveform (AC Mode)	Pure Sine wave
	Output AC Waveform (Battery	Pure Sine wave
	Mode)
	Nominal Output Voltage(s)	200V; 208V; 240V
	Supported
	Output Receptacles	(2) L6-30R; (8) C19
	Individually Controllable Load Banks	No
	BATTERY
	Battery Type	Valve Regulated Lead Acid (VRLA)
	Full Load Runtime (min.)	5.5 minutes (14,400 watts)
	Half Load Runtime (min.)	13.5 minutes (7200 watts)
	Expandable Battery Runtime	Runtime is expandable with external battery packs
	Expandable Runtime	Yes
	Expandable Runtime Description	For best results, add external batteries in multiples of two so that both included 8kVA power modules have an equal
		number and type of connected battery packs
	External Battery Pack Compatibility	<a class="productLink" href="//www.tripplite.com/external-240v-tower-battery-pack-tripp-lite-3-phase-ups-
		systems-3u~BP240V10RT3U">BP240V10RT3U</a> ;  <a class="productLink"
		href="//www.tripplite.com/external-240v-battery-pack-select-tripp-lite-ups-systems-built-in-charger~BP240V787C-
		1PH">BP240V787C-1PH</a>
	DC System Voltage (VDC)	240
	Battery Recharge Rate (Included	Less than 6 hours from 10% to 90% (typical, full load discharge)
	Batteries)
	Battery Replacement Description	Hot-swappable, user replaceable external battery packs
	VOLTAGE REGULATION
	Voltage Regulation Description	2% output voltage regulation in standard online, double-conversion mode

3 / 6