Tripp-Lite SU16000RT4UHW Catalog Page

SmartOnline 208/240&120V 16kVA 11.2kW

Highlights

16kVA / 16,000VA / 11,200W

on-line double-conversion UPS,

split phase input

208/120V or 240/120V +/-3%

output at 60Hz, 94% Efficient

Economy-mode option

8U Rack/Tower compatible;

Hot-swappable power and

battery modules

USB, RS232 & EPO ports; slot

for network management card

options

Front panel LEDs with detailed

LCD monitoring and control

screen

Expandable runtime with optional

external battery packs

Hardwire input (4 wire split

phase); Hardwire output

Package Includes

SU16000RT4UHW UPS Power

Module

BP192V18-4U External battery

pack

SUPDMB16KHW Detachable

PDU with manual bypass switch

4-post rackmount installation

brackets

Double-Conversion UPS, 8U, Extended Run,
Network Card Slot,USB,DB9,Bypass,Hardwire

MODEL NUMBER: SU16000RT4UHW

Description

Tripp Lite's SU16000RT4UHW SmartOnline Hot-Swappable Modular Rack/Tower UPS System provides

16,000VA(16kVA) on-line, double-conversion UPS support for server, network and telecommunications

equipment. Maintains battery-derived AC output during blackouts with active, full-time power conditioning.

Fault-tolerant auto-bypass prevents unexpected service interruptions during overload or internal fault conditions.

4U power module and 4U external battery pack installs in 8 rack spaces(8U). Upright tower and two-post

rackmount installation supported with optional accessories. Maintains full-time sine wave output within 3% of

selectable 208/120 or 240/120V AC. Corrects brownouts and overvoltages from 65V to 140V(L-N). Expandable

runtime with optional external battery packs. Converts raw input from AC to DC, then resynthesizes output power

back to perfect sine wave AC output with enhanced protection from harmonic distortion, fast electrical impulses

and other hard-to-solve power problems not addressed by other UPS types. Highly efficient operation in optional

economy mode setting, saving BTU heat output and energy costs. Network-grade AC surge and noise suppression. Network management interfaces include

combination DB9 RS-232 enabled and dry contact serial port, enhanced USB port and slot for network management card options, such as Tripp Lite's

SNMPWEBCARD network interface. HID-compliant USB interface enables integration with built-in power management and auto-shutdown features of

Windows and Mac OS X. Supports simultaneous detailed monitoring of equipment load levels, self-test data and utility power conditions via all three network

interfaces. Includes PowerAlert monitoring software and complete cabling. Supports Emergency Power Off(EPO) via built-in interface. Front panel LEDs and

LCD readout with scroll controls support visual monitoring of all major UPS functions. LED/LCD display panel easily rotates for viewing in rackmount or tower

configurations. Split-phase, four-conductor hardwire input. UPS supports hardwire output. Output hardwire connections are mounted on a detachable

backplate with manual bypass switch to enable hot-swappable UPS replacement without powering off connected equipment. External battery packs are field

replaceable and hot swappable. Attractive all-black color scheme.$250,000 Ultimate Lifetime Insurance(U.S., Canada, and Puerto Rico only).

Features

True on-line, double-conversion UPS provides pure, full-time sine wave AC output free of surges, voltage fluctuations and line noise

16,000VA/11,200W output power capacity with dual voltage output of 208/120V or 240/120V

4U high power density power module and 4U external battery pack support rackmount installation in 8 rack spaces(8U)

Dual conversion UPS actively converts raw input from AC to DC, then back to perfect sine wave AC output with enhanced protection from harmonic

distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types

Hardwire input and output terminals are mounted on a detachable backplate with manual bypass switch to enable hot-swappable UPS replacement

without powering off connected equipment

Provides perfectly regulated, sine wave output power free of line noise, transient surges and frequency variation for the most efficient operation of critical

servers, networking and telecommunications equipment

Maintains output within 3% of selected 208/120V or 240/120V nominal voltage during brownouts and overvoltages

Supports connected equipment during blackouts for 12/5 min. at half/full load levels; runtime is further expandable with optional external battery

packs(Model BP192V18-4U)

Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software(see manual)

Intelligent battery management system extends battery life

Highly efficient Economy-mode option

Network interfaces support simultaneous communications via DB9 port, USB port and slot for network management card options, such as Tripp Lite's

SNMPWEBCARD network interface

DB9 port supports RS-232 and dry contact messaging. HID-compliant USB interface enables integration with built-in power management and auto

shutdown features of Windows and Mac OS X

Included PowerAlert UPS monitoring software supports safe unattended shutdown, monitoring and control via local connected servers, plus any number

of additional servers over IP

Communications ports support on-battery, low-battery, power-restored, AC-voltage, DC-voltage, output current monitoring, battery charge current, battery

capacity, AC line frequency, timed inverter shutoff, activate self-test and output power control

Built-in Emergency Power Off(EPO) interface with cable

Supports hardwire output at 208V and 120V

Split phase, four-conductor hardwire input connection on included detachable PDU

Front panel LEDs and LCD readout with scroll button enables visual confirmation of all major UPS functions and current site electrical conditions

Front panel switches enable power on/off control, self-test and alarm cancel functions

Included adjustable mounting rails support installation in 4-post 19-in. rack enclosures

Optional 2-9USTAND tower stand set supports upright tower installation

Optional 2POSTRMKITHD accessory enables 2-post rackmount installation

Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions

$250,000 Ultimate Lifetime Insurance(U.S., Canada, and Puerto Rico only)

Specifications

OUTPUT

Output Volt Amp Capacity (VA) 16000

Output kVA Capacity (kVA) 16

Output Watt Capacity (Watts) 11200

Output kW Capacity (kW) 11.2

16,000VA, 11,200W (240V) / 13,860VA, 11,200W (208V); Supports up to 105% load continuously in double

Output Capacity Details

Power Factor 0.7

conversion mode, 106 to 125% for 3 minutes, 126 to 150% for 30 seconds; Loads over 150% trigger immediate
bypass mode operation to support equipment directly from mains power; Double conversion mode is automatically
restored as the overload is cleared