Trimble Juno T41 User Manual

Juno T41

User Manual

Welcome

Thank you for purchasing a Juno T41 rugged handheld computer!
This user manual will help you configure and use your device.

Important information for using the user ma nual

This user manual has been prepared to guide you through the
configuration and operation of your device, which includes:

1. Initial configurati on o f the device

2. Operating basics

3. Navigating the operating system and software

4. Securing your device

Please read this user manual carefully before using your device for
the first time. In particular, read the Important Safety Information and
all of Chapter 1 before using your device.

This user manual descri bes featur es and functionality that may not
be present on your particular device, as features vary by model.

Document conventions

It is important to understand the typographical conventions used in
this user manual. The for mat ti ng of the text id entifies special
information:

1. CAPITAL — indicates the hardware items on the device.
Example: press the POWER button.

2. Bold — indicates the items displayed on the screen, including
icons, tiles, buttons, headings, field names and options.
Example: tap the E-mail icon.

3. Italic — indicates the name of a screen/window as shown in the
upper left corner of the display.

i

Example: the Settings screen.

4. > — describes a procedure or a navigation path.

5. Example: Tap > Settings > System > Sy stem Information >
Wireless is equiv al ent t o:

1. Tap the (Start) icon or press the (Start) button

2. Tap the Settings icon

3. Tap the System icon

4. Tap the System Information icon

5. On the System Information screen, slide left or right until the
Wireless tab is displayed. You can also tap the < or > in the
horizontal scroll bar to activate different tabs in the System
Information screen.

Terms

The following terms are used throughout this user manual to
describe user actions.

1. Press — press and quickly release a hardware button.

2. Tap — touch and quickly release an item displayed on the
screen.

3. Select — tap an item in a list or tap a command from a menu.

4. Drag — tap and hold on the item and then move it to the target
position without releasing your fingertip.

5. Slide — touch and drag to the left/right/up/down to move to the
next item on the list.

Important safety information

• THE DEVICE BATTERY IS PARTIALLY CHARGED WHEN

SHIPPED NEW FROM THE FACTORY.

• BEFORE INSERTING OR REMOVING A SIM CARD, THE

PHONE MODULE MUST BE POWERED OFF. To do this,
press and hold the POWER button for two seconds to

ii

display the Power Menu, then tap Enable Airplane mode.
Alternatively, use the Wireless Manager to disable only the
Phone module.

• DO NOT OPERATE THE DEVICE WITHOUT THE C ARD

SLOT COVER PROPERLY INSTALLED.

• IN MANY COUNTRIES YOU ARE REQUIRED BY LAW TO

TURN OFF YOUR PHONE WHEN YOU FLY. THE MOST
SECURE METHOD TO ACCOMPLISH THIS IS TO ENABLE
AIRPLANE MODE. To do this, press and hold the POWER
button for two seconds to display the Power Menu, then tap
Enable Airplane mode.
WARNING: TURNING OFF YOUR DEVICE DOES NOT
TURN OFF THE PHONE; YOU MUST USE AIRPLANE MODE.

• YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR

TAMPER WITH THE OUTER CASING OF THE DEVICE.
Unapproved modifications or operations beyond or in
conflict with these instructions for use may void
authorization by the authorities to operate the equipment.

• ONL Y APPROVED AC CESSORIES MAY BE USED WITH THIS

EQUIPMENT. IN GENERAL, ALL CABLES MUST BE HIGH
QUALITY, SHIEL DED, CORRECTL Y TERMINATED AND
NORMALLY RESTRICTED TO TWO METERS IN LENGTH.
THE POWER SUPPLY APPROVED FOR THIS PRODUCT
EMPLOYS SPECIAL PROVISIONS TO A VOID RADIO
INTERFERENCE AND SHOULD NOT BE ALTERED OR
SUBSTITUTED.

iii

Disclaimers

The manufacturer operates a policy of ong oi n g product development.
The manufacturer reserves the right to make changes and
improvements to any of the hardware and software products
described in this document without prior notice.

The screenshots and other presentations shown in this user manual
may differ from the actual screens and presentations generated by
the actual product. The manufacturer does not warrant that this
document is error-free.

Not all models are avai l able i n al l regions of the world. Depending on
the specific model purchased, the color and look of your device and
accessories may not exactly match the graphics shown in this
document. Not all models contain all of the hardware features and
software applications described in this user manual.

All such differences are minor and the actual product will deliver the
described functionality as presented in this User Manual in all
material respects, subject to limitations of the particular model
operated by the user.

Limited Warranty & Liability Limitations

This unit and battery are limited warranted against defects in
materials and workmanship for twelve (12) months from the original
date of purchase. All accessories and peripherals are limited
warranted against defects in materials and workmanship for twelve
(12) months from the original date of purchase. If notice is received
of such defects during the limited warranty period, the proven
defective product(s) will either be repaired or replaced, at the
manufacturer’s option. Replacement products may be either new or
like new.

The manufacturer does not warrant that the operation of the
products will be uninterrupted or error free. If the product is not,
within a reasonable time, repaired or replaced to a condition as
limited warranted, the customer will be entitled to a refund of the
purchase price upon prompt return of the product.

Limited warranty does not apply to defects resulting from (a)
improper or inadequate maintenance or calibration, (b) software,

iv

interfacing, parts, or supplies not supplied by manufacturer, (c)
unauthorized modification, or misuse, (d) operation in conditions
outside of the publishe d environme ntal specific ations for the produc t,
or (e) physical damage due to external causes, including accident,
abuse, misuse or problems with electrical power. Water damage
caused by improper installation of the accessories and service parts
is not covered by warranty. Removal of or tampering with the back
case voids the limit ed w arranty. There are important se als tha t wil l be
compromised and the device will no longer be water resistant (IP65)
or waterproof (IP68).

To the extent allowed by local law, the above limited warranties are
exclusive and no other warranty or condi ti on, whether written or or al ,
is expressed or implied, specifically disclaiming any implied
warranties or conditions of merchantability, satisfactory quality, and
fitness for a partic ular pur pose.

To the extent allowed by local law, the remedies in this limited
warranty statement are the customer’s sole and exclusive
remedies. Except as indicated above, in no event will the
manufacturer or its suppliers be liable for loss of data or for
direct, special, incidental, consequential (including lost profit or
data), or other damage, whether based in contract, tort, or
otherwise.

Standard Warranty A ddendum

Trimble Navigation Limited
935 Stewart Drive
Sunnyvale, Californi a 940 85
United States of America

Notice to Australian Purchasers

The Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the

Australian Consumer Law. You are entitled to a replacement or
refund for a major failure and for com pensation for any other

v

reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of
acceptable q uali ty and the failure d oes n ot amount to a major failur e .

Trimble's warranty, as set out in the user manual accompanying this
statement, or as described in the warranty card accompanying the
Product you purchased, is in addition to any mandatory rights and
remedies that you may have under the Australian Consumer Law.

Copyright

All brand and product names are trademarks or registered
trademarks of their respective companies.

Revision: 1.0
(09/2012)

vi

Contents

Welcome ......................................................................................................... i

Important information for using the user manual ..................................... i

Document conventions ............................................................................. i

Terms ...................................................................................................... ii

Important safety information .................................................................... ii

Disclaimers ............................................................................................. iv

Limited Warranty & Liability Limitations ................................................. iv

Standard Warranty Addendum ................................................................ v

Copyright ................................................................................................ vi

Contents ....................................................................................................... vii

Chapter 1 Getting Started ............................................................................ 1

1.1 Device components ........................................................................... 1

1.2 Inserting a storage card and a SIM card ........................................... 5

1.3 Charging the battery .......................................................................... 7

1.4 Turning your device on and choosing your language ....................... 9

Chapter 2 Operating Basics ....................................................................... 12

2.1 Home screen ................................................................................... 12

2.2 Start screen ..................................................................................... 14

2.3 Title bar ........................................................................................... 14

2.3.1 Title bar status indicators ............................................................. 14

2.4 Tile bar ............................................................................................ 16

2.5 Power menu .................................................................................... 16

2.6 Securing your device ....................................................................... 17

Lock the keypad .................................................................................... 17

Lock your device ................................................................................... 18

2.7 Configuring the Onscreen Keyboard ............................................... 19

2.8 Perform a Clean Boot / Factory Reset ............................................ 19

2.9 Absolute Power Off mode ............................................................... 20

Chapter 3 Managing and Caring for Your Devic e .................................... 21

3.1 Changing basic settings .................................................................. 21

Personalizing the Home sc reen ............................................................ 21

Setting the date, time, and alarms ........................................................ 21

Setting regional options ......................................................................... 22

3.2 Customizing sounds and notifications ............................................. 22

Specifying the sound for an event ......................................................... 22

Setting the ring tone for incoming calls ................................................. 22

Copying a sound to your device ............................................................ 23

3.3 Managing battery power and data storage ..................................... 23

Battery Life ............................................................................................ 23

vii

Changing the power management settings .......................................... 24

Managing low battery ............................................................................ 25

Checking the phone memory ................................................................ 25

3.4 Working with files ............................................................................ 26

Copying files to your computer .............................................................. 26

Using File Explorer ................................................................................ 26

3.5 Adding and removing programs ...................................................... 27

Installing a program from your computer .............................................. 27

Removing a program ............................................................................. 28

3.6 Using Task Manager ....................................................................... 28

3.7 Checking the Device System information ....................................... 28

3.8 Caring for your Device .................................................................... 28

3.9 Safe Use of your Device ................................................................. 30

Chapter 4 Connecting to a PC and Synchronizing Information ............. 32

4.1 Setting up Windows Mobile® Device Center ................................... 33

Using Windows Mobile Device Center .................................................. 33

4.2 Setting up ActiveSync® ................................................................... 34

Setting up synchronization in ActiveSync ............................................. 34

4.3 Synchronizing with your computer .................................................. 35

Starting and stopping synchronization .................................................. 35

Selecting information to synchronize .................................................... 36

Troubleshooting sync connection problems .......................................... 36

Chapter 5 Using the Phone ........................................................................ 38

5.1 Making a call ................................................................................... 38

Making a call from the Phone screen .................................................... 38

Making a call from Contacts .................................................................. 39

Making a call from Call History .............................................................. 39

Making an international call ................................................................... 40

Making an emergency call .................................................................... 40

5.2 Receiving and ending a call ............................................................ 40

Ending a call .......................................................................................... 41

5.3 Speed dial ....................................................................................... 41

Using speed dial .................................................................................... 41

5.4 Working with WWAN (mobile data service) .................................... 42

5.5 Working with CellStart ..................................................................... 42

Removing cellular data settings ............................................................ 43

5.6 Customizing your phone ................................................................. 43

5.7 Browsing the Internet ...................................................................... 44

Internet Sharing ..................................................................................... 44

5.8 SMS messages ............................................................................... 44

5.9 Sending and receiving e-mail .......................................................... 45

Chapter 6 Using Additional Hardware Features ...................................... 46

6.1 Flashlight ......................................................................................... 46

viii

6.2 Assigning Buttons (hardware buttons) ............................................ 46

6.3 Compass Calibration ....................................................................... 46

6.4 Working with Bluetooth ................................................................... 47

6.5 Working with Wi-Fi .......................................................................... 49

Using the Summit Utilities ..................................................................... 52

Accessing the Summit Client Utility ....................................................... 53

Main Window ......................................................................................... 54

Profile Window ...................................................................................... 55

Status Window ...................................................................................... 55

Diags Window ....................................................................................... 55

Global Window ...................................................................................... 56

6.6 Working with the Camera ................................................................ 56

User Interface ........................................................................................ 57

Thumbnail Window ................................................................................ 57

Capturing Images .................................................................................. 58

Capturing Videos ................................................................................... 58

Closing application ................................................................................ 59

Image Camera Application Features..................................................... 59

Image Delete and Switch to Camera in Image review mode ................ 64

Video Camera Application Features ..................................................... 64

6.7 Working with GPS ........................................................................... 67

GPS settings: ........................................................................................ 67

Exiting GPS applications ....................................................................... 68

6.8 SatViewer ........................................................................................ 68

6.9 Battery Logger ................................................................................. 68

Appendix A: Regulatory Compliance ....................................................... 70

U.S.A. - FCC Statem ent ........................................................................ 70

Exposure to Radio Frequency (RF) Signals ......................................... 70

Telecommunications & Internet Association (TIA) information ............. 71

Canada Compliance, Industrie Canada (IC) ......................................... 72

RoHS Statement ................................................................................... 73

European Conformity Statement ........................................................... 73

Europe ................................................................................................... 73

Environmental Hazards ......................................................................... 75

Toxic and Hazardous Substances and Elements ................................. 75

Taiwan ................................................................................................... 76

ix

Chapter 1 Getti ng Started

1.1 Device components

1. Color Band

The color band surrounding the screen is yellow or grey, and
indicates IP65 or IP68, respectively.

2. Touchscreen

The capacitive touchscreen enables handwriting, drawing and
making selections with your finger. An optional T41 Capacitive
Stylus, sold separately, is available.
The touchscreen is on a rugged Gorilla® Glass panel, an d to

1

prevent cosmetic scratches, a screen protector is recommended.
Follow the instruction below to apply the Screen Protector.

3. Phone Receiver (Ear)

When using the phone, place the receiver to your ear to hear the
other participant(s) to the phone call.

4. Light Sensor

The Light Sens or d et e cts ambient l ight in your environment. I f t he
Backlight control i s config ured to us e the Lig ht Sensor, the screen
brightness dims in a dark environment and brightens in a lighted
environment.

5. Notification LED

One tri-color LED (Red/Amber/Green) indicator is provi ded for
user notifications. These include battery status and other
operating system (OS) notifications. This indicator is capable of
operating even when the device is in Shutdown mode.

The LED status behavior is as follows:

Color Pattern Condition Notes

Red Solid Low battery

Red Blinking
Amber Solid Charging
Amber Blinking

Amber Blinking

Green Solid Fully charged
Green Blinking

Low battery and

OS notification

Charging and OS

notification

OS notification,
medium battery

charge

Fully charged and

OS notification

2

Connect device to

charger before

pressing POWER.

Color Pattern Condition Notes

<Off> n/a

Battery not low,

no OS notification

6. POWER button

 When the device is on, press and release to suspend or

resume the device.

 Press and hold for 2 seconds to open the Power Menu.
 Press and hold for 6 to 8 seconds to force the device to

Reset.

7. MCX port

The MCX port enables connecting an optional External GPS
Antenna to provide improved GPS signal reception when
operating the Juno T41 inside a vehicle or in other situations
where the sky visibility is limited.

8. Accessory Latch

The accessory latch is designed to lock the connection of
Extended Battery Pack.

9. Camera and Flash

 The camer a takes pictures and records videos.
 The flash assists the camera in low-light conditions.

10. Speaker

Listen to audio media or a phone call fro m here.

11. Wrist Strap tie point

Wrist strap tie points are provide on both sides of the device to
accommodate left- and right-handed users.

12. OK button

Press to confirm your selection. Pressing this button is typically
equivalent to tapping the X tile or OK tile on the Tile bar.

13. RIGHT button ( )

Press to activate the associated tile (if any) on the Tile bar .

3

14. Microphone

Speak her e w hen talking during a phone call.

15. LEFT button ( )

Press to activate the associated tile (if any) on the T i le bar.

16. button

Press to access the Start screen. Press again to access the
Home screen.

17. T41 Custom Port

Connect the T41 Custom USB Client cable to this port to charge
the device or connect to the device from a desktop or laptop
computer.
Two optional accessories are available, the T41 USB Host Cable
and the T41 9-Pin Serial Cable.

18. microSD storage card and SIM card slots

Use the SD/SIM Card Access Tool to loosen the protective cover.
A microSD storage card provides additional file storage.
A SIM card provides access to a GSM cellular network, enabling
the device to place and receiv e phone call s, send and rec eive
text messages and to connect to 3.75G mobile data services.
(Contact a GSM cellular service provider in your area to obtain
services and a SIM card.)

19. VOLUME control and ACTION buttons

Press the + / - button to increase/decrease the volume for your
device.
Press the ACTION button (between the + / - buttons) to select an
option.

20. Headphone or Headset connector

Connect a 3.5 mm stereo headphone to listen to audio media or
use the hands-free kit.
Connect a 3.5 mm stereo headset to listen to audio media and to
use the phone in hands-free mode.

4

1.2 Inserting a storage card and a SIM card

To install a microSD storage c ar d an d a S IM car d i n your device, you
need to remove the cover on the left side using the SD/SIM Card
Access Tool included with the device accessories.

NOTE: The device supports up to 32 GB SDHC microSD storage
cards. SDXC cards are not supported.

WARNING: Insert or remove a SIM card ONLY when the Phone
module is completely off.

WARNING: Only insert a SIM card on devices with Phone/WWAN
capability.

1. Remove the cover on the left side of the device by unscrewing
the screws.

2. Follow the illustration below to insert the storage card and the
SIM card:

 To insert the SIM card: push the card into the slot with its

metal contacts facing the back of your device.

 To insert the storage card: hold the card by the edges and

gently insert it into the slot with the label facing the front of
your device. Do not apply pressure to the center of the
storage card while inserting the card.

5

3. To remove a card, push the card to release from the slot.

NOTE: Make sure you have saved any data in open programs
before removing the storage card.
WARNING: Only remove a SI M card w hen th e dev ic e is i n Shutdown
mode, Absolute Power Off mode, Airplane mode or when the Phone
module is off.

6

4. Replace the cover and then secure it with the screws.

1.3 Charging the battery

IMPORTANT: Before using the Juno T41 for the first time, charge

the device for at least 4 hours. The notification LED will turn green
when fully charged.

CAUTION: Avoid Extreme Heat

• The battery is designed to stop operating at or above 149

°F (65 °C). If this status icon appears, the battery has
overheated to 140 °F (60 °C) or more.

• If the battery temperature exceeds 158 °F (70 °C), the

battery will be disabled and the device must be sent to an
Authorized Service Provider to have the battery replaced.

Operating Temperature Range: -22 °F to 140 °F (-30 °C to 60 °C)
Storage Temperature Range: -40 °F to 158 °F (-40 °C to 70 °C)

CAUTION: Do not exceed specified storage temperature.

7

1. Connect the USB end of the T41 Custom USB Client cable to the
AC charger.

2. Connect the custom end of the T41 Custom USB Client cable to
the connector on the bottom face of your device.

8

3. Plug the AC charger into a wall outlet. If needed, attac h a plug
converter onto the AC charger.

Tips for extending the battery life:

See Chapter 3.3 for tips on extending battery life.

1.4 Turning your device on and choosing your

language

WARNING! BEFORE TURNING THE DEVICE ON, THE DEVICE
MUST BE PLUGGED IN TO AN EXTERNAL POWER SOURCE.
COMPLETE ALL STEPS IN 1.3 CHARGING THE BATTERY.

1. Once you begin to charge your device, the device turns on
automatically.

9

2. The Welcome Wiz ard will lead you through the setup process.

3. Select your preferred language by using the + or - (shown as UP
or DOWN on the Wizard) buttons on the left side of the device,
then press the ACTION (shown as ENTER on the Wizard) button
to choose the language (the touchscreen is not enabled in the
Wizard).

4. Use the + button to highlight the box next to Yes, I want to use
<language > as the language on the device.

a. Press the ACTION (ENTER) button to check the box.
b. Press the - (DOWN) button 2 times to highlight the Next >

box.

c. Press the ACTION (ENTER) button to select Next >.

Wait while your device is being configured for the
language you selected.

WARNING: The only way to change the language you have
selected is to re-install the firmware using the Firmware updat e
utility.

NOTE: Only Microsoft applications and messages will be
translated into languages other than English. All other error
messages, notifications and other applications may appear in
English.

10

5. Tap the screen to set up your device with a Security PIN
(optional).

6. See Chapter 3 for instructions on setting the date and time on
your device.

11

Chapter 2 Operatin g Basics

2.1 Home screen

The Home Screen is an easy way to launch common activities, such
as using the phone, c hecking text messag es or chec ki ng e-mail. You
can view high-lev el information at a glance, w i th noti ficat ions for Live
services, e-mail, voicemail, SMS/MMS and more.

To navigate the Home screen, touch and slide your fingertip up or
down on the screen; or drag the highlight bar to the desired item on
the screen. The programs provided on the Home screen include:

• pictures: Select your photos from this menu.

• music: Select your music from this menu.

• phone: If your device has the phone feature, select this item to

use the phone.

• voicemail: If your device has the phone feat u r e, s el ect t his i te m

to access your voicemail.

• time: Select your time zone, set the time and date and set

alarms.

• text: If your device has the phone feature, select this item to

compose and read text messages.

• e-mail: Select this item to read and compose e-mail.

12

• calendar: Select this item to manage appointments.

• favorites: Select this item to use Internet Explorer Mobile.

You can change to the classic Windows Mobile Today screen by
tapping

> Settings > Home.

1. On the Appearance tab, change the theme to Classic Blue.

2. On the Items tab, u ncheck Windows Default and select the
items that you would like to appear on the Home screen.

13

Juno T41

User Manual

2.2 Start screen

Press the button to acc ess the Start screen where you can easi ly
access the software installed on your device. Slide your fingerti p
up/down on the Start screen to browse more items and then access
an item by tapping on the item.

2.3 Title bar

In Windows Embedded Handheld, th e title bar is locat ed at the top o f
the screen an d it i s touchabl e. Tap anywher e on the title bar t o rev eal
a list of vertical icon slots, representing different categories of icons.
Tap an icon to get additional notification or status information. The
title bar also provides access to the Magnify tool, providing a closer
look at the data on the screen. Simply tap the Magnify icon on the
right end of the title bar to end magnify mode.

The Start, OK, and Close (X) icons have been mov ed fr om the Title
bar to the Tile bar to improve consistency. Now, all navigation
controls—Start, OK and Close—are in one place.

2.3.1 Title bar status indicators

The following table lists common status indicators seen in the Title
bar.

Icon Description Icon Description

14

Juno T41

User Manual

Battery power is low

Battery power is very low
Battery communication error

Battery charging

Battery level
Battery out of temperature

range WARNING
Instant messages received

Speaker is on

Speaker is off (or in mute
position)

SIM card missing
Faulty SIM card

E-mail has been received

Tap to view more notifications

Other networks are detected.
Tap to access an available
network

Wireless network connected
Active connection, but not

currently synchronizing
Inactive connection to

computer or wireless network
Synchronizing

Synchronizing error

Pending alarm

Phone is turned on and signal
strength

Phone is turned off. To turn it
on, tap this icon

No signal
No service. Phone connection

unavailable or network error.
Lost signal. The device is

searching for a signal.
EDGE network is available

Data call is in progress
Roaming mode

3G connected
Airplane mode enabled. The

EDGE network connected
GPRS network available

GPRS network connected
HSDPA network available

device radios are all off.
GPS receiver is off.

Vibrate mode is on

15

GPS receiver is on.

Juno T41

and/or if you continue to hold down the

User Manual

2.4 Tile bar

The Tile bar is loc at e d at the bot t om o f the scr een and the
information display ed ther e is mor e uniform than on earlier versi ons
of Windows® Mobile operating systems. The Tile bar uses touchabl e
tiles, and these tiles can be activated by pressing the corresponding
buttons on front keypad of your device.

Touchable tiles can be text strings or ic ons, d epe ndi ng on t h e sc r ee n,
and they are at fixed positions on the Tile bar. For example, the Start
icon is always in the far left position, and the OK or Close icon is
always on the far right. If the Tile bar has a Keyboard icon, it is
always in the third, or center position; if it has additional menu or
feature access icons, they will be on either side of the Keyboard
icon.

The buttons on the bezel below the screen correspond to the
touchable tiles on the Tile bar. Press a button to activate the
associated tile.

2.5 Power menu

Press and hold the POWER button for about 3 seconds until the
Power Menu appears. Tap an option or OK to exit.

• Shutdown: Turn off the device.

• Enable Airplane mode: Enable the

Airplane mode for the devi ce.

• Disable Airplan e mode: Disable the
Airplane mode for the devi ce.

• Reset: Restart the device.

• Vibration On: Enable the Vibration

mode for the device.

NOTE: If the Power Menu does not appear

when the POWER button is held down,

16

Juno T41

POWER button for at least 7 seconds, the

User Manual

device will perform a hardware reset. It may
take a few seconds for the device to start
after the POWER button has been released.

2.6 Securing your device

You can customize the level of security you want to have on your
device by locking the keypad or the entire device.

Lock the keypad

The keypad lock turns off the keypad functionality. This is a helpful
feature if, for example, your device is turned off and in your pocket,
and you want to prevent accidental button presses from activating
the device.

To lock the keypad, press the
then press the LEFT button or tap the padlock tile on the Tile bar.

button to access the Start screen,

17

Juno T41

User Manual

You will then see the following screen:

To unlock the keypad, slide the lock symbol.

Lock your device

Locking your device prevents access to personal data. When you
enable this feature, your device will automatically lock after a
specified time of inactivity. A screen will be displayed requiring your
device lock password before access is granted.

To access the Lock menu, tap > Settings > Lock

WARNING: BE CERTAIN TO REMEMBER THE PASSWORD.
The only way to recover from a forgotten password is to perform a
Clean Boot. However, you will LOSE all application software,

licenses, settings and data on your device. For instructions on how

18

Juno T41

User Manual

to Perform a Clean Boot, see below..

2.7 Configuring the Onscre en Keyboard

The Soft Input Panel (also called S.I.P.) is a special on-screen
keyboard for devices which do not have standard keyboards. The
Juno T41 includes a custom S.I.P. application called Resco

Keyboard Pro. To configure it, tap > Resco Keyboard Pro.

Resco Keyboard Pro allows you to customize your device for fast
insertion of frequently used phrases, and to customize various
features including haptic or audio feedback, basic or advanced
gestures and more. Resco Keyboard Pro supports 39 la ng uag es .

2.8 Perform a Clean Boot / Factory Reset

WARNING: Application software installed by the customer and some

licenses, settings and user data will be cleared if this function is
performed!

1. Press and hold the POWER button to display the Power Menu.

2. Tap Reset.

3. When you see the screen goes completely black, press and hol d
the button.

4. When you see the Juno T41 screen, press the RIGHT button
while still holding the button. Let go of both buttons.

19

Juno T41

User Manual

5. Press the ACTION button on the left side of the device to clear
the persistent store. Press any other button to cancel and
continue booting normally.

2.9 Ab so lute Power Off mode

The Juno T41 features a battery cut-off mode that enables the
device to enter the absolute low est pow er mode possible, even l ower
than the SHUTDOWN power state. In this mode, the draw on the
battery is less than 20 uA.

The primary purpose for this mode is to prolong the shelf life of the
battery while the product is between the production factory and the
customer. A secondary purpose is to ensure the dev i ce i s c ompletely
powered down before shipping the product via air freight, or when
putting the product into stor ag e for an extended period, typic al ly
longer than a week.

NOTE: The sole method for exiting this mode is to charge the
battery.

To activate the Absolute Power Off mode, follow these steps:

1. Disconnect the T41 USB Client cable, if connected.

2. Press and hold the POWER button to display the Power Menu.

3. Tap Reset. The screen will go black as the unit goes through
reset.

4. When it comes out of reset, indicated by the Juno T41 splash
screen appearing, press and hold the LEFT button ( ) and the
RIGHT button ( ).

5. A message will appear: “Please remove AC. System is turning
off”

6. The device is now in Absolute Power Off mode.

20

Juno T41

User Manual

Chapter 3 Managing and Caring for Your Device

3.1 Changing basic settings

Personalizing the Home screen

The Home screen is the starting place for most of the tasks you
perform on your device and gives you access to all the features and
software programs of your device.

1. Tap

2. Select the available option from the list.

3. When done, tap OK.

4. To set a picture as the Home screen background:

Setting the date, time, and alarms

1. Tap

2. Set the Time zone, Date, and Time.

3. When done, tap OK.

4. To set an alarm:

> Settings > Home > Appearance.

a. Select the Use this picture as the background option.
b. Tap Browse to select the picture you want to use.
c. When done, tap OK.

> Settings > Clock & Alarms > Time.

a. On the Clock & Alarms screen, go to the Alarms tab.
b. Tap on the alarm item to dis play the Alarm Settings screen,

allowing you to change the Alarm sett ings. Tap OK to save
the settings.

c. Tap the checkbox on each available alarm item to enable

or disable the alarm.

d. When you enable an alarm, an Alarm icon appears on the

Home screen.

21

Juno T41

User Manual

e. You may also need to check the Sound alarms even

when the device is set to silent or vibrate checkbox.

Setting regional options

Your device comes with the regional settings that are appropriate for
your locale.

1. On the Home screen, tap > Settings > System > Regional
Settings.

2. On the Regional Settin gs screen, select the Region tab and then
select your preferred language from the list.

3. If desired, you can specify the locale, date and time style, as
well as number and currency formatting options applicable to
your region.

4. When done, tap OK.

3.2 Customizing sounds and noti f ications

You can choose how to be notified for incoming calls, reminders,
new messages, alarms, and more.

Specifying the sound for an event

1. On the Home screen, tap > Settings > Sounds &
Notifications.

2. From the Sounds tab, select the desired sound for each event.

3. When done, tap OK.

Setting the ring tone for incoming calls

1. On the Home screen, tap > Settings > Sounds &
Notifications.

2. From the Notifications tab, select a ring tone in the Ring tone list.

3. When done, tap OK.

NOTE: If you select Vibrate, the sound mutes and the phone will
vibrate when you receive a call. The Vibrate status icon appears in

22

Juno T41

User Manual

the title bar.

Copying a sound to your device

You can use a .wav, .mid, .wma, or .mp3 audio file on your device as
a ring tone, notification, or reminder.

1. Connect the device to your PC using the T41 Custom USB Client
cable.

2. On your PC, copy the sound file you want.

3. Explore the phone’s contents:

 In Windows Mobile Device Center on your PC, tap File

Management > Browse the contents of your device.

 In ActiveSync on your PC, tap Explore and double-tap My

Windows Mobile-Based Device.

4. Navigate to your d evice’s Application Dat a > Sounds folder and
then paste the audio file.

3.3 Managing battery power and data storage

Battery Life

The Lithium-ion polymer battery life is dependent upon the
application and operating environment. For example, estimated
battery life for a new battery is approximately 12 hours with the
device turned on but idle, backlight at 15% and all radios and
compass off.

Tips for extending the battery life:

- Display backlight: Tap > Settings > System > Backlight to

minimize the amount of time the backlight stays on and dim it to
only as bright as required to view the display.
Alternatively, verify that the backlight brightness is auto-adjusting

based on the Light Sensor, by tapping > Settings > System >

Backlight > Brightness and checking the box for Use Light
Sensor to adjust the brightness.

- Wi-Fi, Bluetooth and camera: Turn off when not needed.

- WWAN: Turn the phone off when not in use.

23

Juno T41

User Manual

- GPS: Ensure that the GPS-aware applications that communicate

with the GPS are closed when not in use.

- Flashlight: Use the flashlight only when needed.

- Cold temperatures: Keep the device as close to room ambient

temperature (77 °F or 25 °C) as possible. If feasible, keep it inside
your coat or a vehicle when not in use.

- Auto features: Tap > Settings > Power > Advanced. Specify

your device to turn off in a short time if not in use. Tap >

Settings > Bluetooth > Wake Settings. T urn off Allow Bluetooth
activity to turn the device on. Bluetooth could turn on your

device, transfer data and drain the battery.

- CPU: Applications requiring significant computations by the CPU

may have some impact on battery life, but this is typically less
significant than manag i ng the hardware features.

Changing the power management settings

You can use Power Management to check the battery, and configure
settings that prolong battery life.

1. Tap > Settings > Power.

2. On the Power screen, you can:
 Select the Battery tab to check the amount of battery life

remaining.

 Select the Advanced tab to change the screen power

settings.

3. To optimize battery usage, you can adjust the backlight settings:

 Tap > Settings > System > Backlight.
 From the Brightness tab, adjust the proper backlight level

and enable the Light Sensor to automatically adjust the
backlight brightness.

4. From the Battery Power tab and External Power tab, set the
backlight off settings

24

Juno T41

User Manual

5. When done, tap OK.

Managing low battery

When the low-battery warning appears, do the following:

1. Immediately save your current data. All of your data is stored in
non-volatile persistent storage memory. Losing power will not
impact saved data or configurations ot her t han t he real-time clock.
As with any computer system, we recommend that you regularly
backup your data to remov abl e me di a or to a PC.

2. Synchronize with your PC or use the AC adapter to charge the
battery.

3. Turn o ff your device while it is charging, especially if it is charging
from the PC USB pow er and not from the AC a dapter pow er. Turn
on Juno T41 only when you need to use it, until the battery is
recharged.

Checking the phone memory

1. Tap

> Settings > System > Memory.

2. From the Main tab and Storage Card tab, check the available
memory and the available storage on your device.

25

Juno T41

User Manual

3.4 Working with files

You can copy files between your device and computer, or copy files
to a storage card installed on your device. You can also efficiently
manage your files and folders using File Explorer.

Copying files to your computer

1. Connect your device to your PC.

2. Do one of the following, as appropriate to your PC:

 In Windows Mobile Device Center on your PC, tap File

Management > Browse the contents of your device.

 In ActiveSync on your PC, tap Explore. This opens the

Mobile Device folder for your device.

3. Browse your device for files that you want to copy to your PC.

4. Select and copy the files [Ctrl + C] and then paste them [Ctrl + V]
to the destination folder in the PC.

Using File Explorer

File Explorer provides many easy-to-use features for file and fol der
management. File Explorer lets you browse and manage the
contents of your device.

1. Tap > File Explorer. The root folder on the device is named

My Device, and contains the following folders: My Documents,
Program Files, Windows, and more.

2. Tap a folder or file to open it.

3. To return to an upper level folder, tap Up.

4. To copy files to a storage card:

a. Verify the storage card is proper ly inst all ed on y our dev ic e.
b. On the File Explorer screen, navigate to the appropriate

folder.

c. Select the file you want to copy, and then tap Menu > Edit

> Copy.

26

Juno T41

User Manual

d. Tap Menu > Storage Card.
e. Tap Menu > Edit > Paste.

NOTE: Unlike Windows® PC’s, Windows Embedded Handheld does
not feature a Recycle Bin. Once a file is deleted, it cannot be
recovered.

3.5 Adding and removing programs

Before you purchase additional pr og r ams for your devi ce, make sure
that they are compatible with the Windows Embedded Handheld
operating system. Also, before you launch the program installer,
check first whether the installer can directly run on Windows
Embedded Handheld or needs to be run on a Windows PC.

Follow the setup instructions that came with your software. If
prompted, perform a reset to complete the installation.

Installing a program directly on your device

1. If the installatio n file is a .ca b fil e, download the file directly to
your device, or download it to your PC and copy it to your device.

2. On your device, tap > File Explorer and navigate to the
installation file.

3. Tap the file to start the i nstallation process .

4. Choose whether to install the program into the main memory or
your storage card, if you have the storage card inserted on your
device.

5. Wait for the installation to complete.

Installing a program from your computer

1. If the installer is an .exe file such as Setup.exe, most likely, the
installer needs to be run on a Windows PC. Download or copy it
to your computer.

2. Connect your device to your computer using the USB cable, and
then double-click the installation file on your computer to start the
installation process.

27

Juno T41

User Manual

3. Follow the on-screen instructions on your computer and your
device to complete the installation.

Removing a program

1. Tap > Settings > System > Remove Programs.

2. Scroll to the program to remove and then tap Remove.

3.6 Using Task Manager

Task Manager allows you to view or stop the programs currently
running on your device.

1. Tap

> Task Manager.

2. On the Task Manager screen, select a program on the list and
then tap End Task.

3. To stop all running programs, tap Menu > End A ll T asks.

4. Tap Menu to open a menu where you can change the view,

sorting order, refresh the screen, and more.

3.7 Checking the Device System information

Tap > Settings > System > System Information. F irmware
version, serial number, processor speed, RAM and Flash size,
wireless configurations, battery and card port information can be
found here.

3.8 Caring for your Device

Cleaning the device

Use a soft, dampened cloth with either water or a diluted mild
detergent. If a mild detergent is used, ensure all soap residue is
removed. Do not use any chemical cleaners and do not put the
device in the dishwasher.

28

Juno T41

User Manual

Care of the touchscreen

Use only your finger, the T41 stylus or other stylus devices
specifically designed for use with capacitive touchscreens.

The use of ballpoint pens, nails or other sharp objects to operate the
touchscreen will scratch and/or damage the device. Keep the
touchscreen clean by gently wiping the display, using a soft,
dampened cloth with either clean water or glass cleaner. Use a
screen protector at all times, and change the screen protector
according to manufacturer recommendations.

Do not use abrasive cleaners directly on the display. Doing so may
void your warranty. Use the screen protectors included with the
device to keep the touchscreen clean and protected, following the
instructions provided on the screen protector package.

Mechanical shock
The device is designed to resist damage for drops up to 4 ft (1.22

meters). However, you should protect the display from impact,
pressure, or abrasive substances that can scratch it or crack it. The
device should not be dropped unnecessarily.

Environmental considerations
The device’s rugged design allows you to run your device in harsh

outdoor environments. Here are some considerations that will help
you get the most out of your device when working in very wet, hot or
cold conditions.

Water: This device is designed to IP65 (yellow units) or IP68 (grey
units). IPx5 is defined as resistant to driving rain and water spray.
IPx8 is defined as resistant to submersion in water up to 1 meter
deep for up to 2 hours.

WARNING: Removal of the back case screws could cause leakage
and will void your warranty.

NOTE: Alth oug h an optional accessory for the port cover is available
and the audio jack has a protective cover, these are not required to
maintain the seal against water. The covers are intended to keep
mud, sand and other material s fro m blocki n g these ports.

29

Juno T41

User Manual

Temperature range: The operational temperature range is from -22

°F to +144 °F (-30 °C to +60 °C). Although the device is designed to
be rugged, do not leave it in direct sunlight in excessive heat or in a
vehicle in the sunlight for extended periods as the internal
temperature may exceed the opera ting or storag e temperature l imit s.

Batteries perform best at roo m te mpera ture. The b atter y has a s ta bl e
capacity as temperatures rise; however, the colder the temperature,
the greater the reduction in available battery capacity. Under very
cold conditions (-4 °F / -20°C and below), the battery capacity is
noticeably reduced. To improve the battery performance in very cold
conditions, consider increasing the load on the battery, such as by
adjusting the backlight to full brightness. Increasing the battery load
causes the battery to generate heat, thus warming the battery and
improving the performance. There are limits to how hard to push the
battery before you reduce the run-time instead of increasing it.

3.9 Safe Use of your Device

Repair: Do not attempt to dismantle the device for repair. There are

no user-serviceable parts inside. For service, use the contact details
listed on the cover of this manual or contact your local dealer.

Battery safety : Lithium-ion polymer batt eri es ar e class i fied by the U .
S. Federal Government as non-hazardous waste and are safe for
disposal in the normal municipal waste stream except where
prohibited by local or regional regulations. These batteries contain
recyclable materials and are accepted for recycling.

NOTE: In the event of a battery failure, return the device to Trimble
or an Authorized Service Provider to have the battery replaced.
Trimble disposes used batt eri es in accord anc e w ith loc al reg ula tions .

1. Do not disassemble or open, crush, bend or deform, puncture, or
shred the battery assembl y. There are no user-serv ic eabl e p arts
in the battery assembly.

2. Do not use battery if plastic case is cracked, compromised or

30

Juno T41

User Manual

punctured.

3. Do not attempt to separate the battery from the device.

4. Do not modify or remanufacture, attempt to insert foreign objects
into the battery, immerse or expose to water or other liquids.

5. Do not expose to fire, explos i on, or oth er hazar d. Do not ex pos e
to temperatures above +158 °F (+ 70 °C ) . T he battery is desig ned
to stop functioning if it reaches an unsafe temperatur e.

6. Only use a charging system that has been qualified for use with
the device.

7. In the event of a battery leak, do not allow the liquid to come in
contact with the skin or eyes. If cont act has b een ma de, flush the
affected area with water and seek medical advice.

Power supply safety: Use only AC and vehicle adapters intended
for the device. Other external power sources may damage your
product and v oid t h e warranty. Certification of this Cl as s I II pr od uc t is
only valid with the power supply – PSA10F-050Q.

 Ensure the input voltage on the power supply matches the

voltage in your location. Ensure the power supply has prongs
compatible with your outlets.

 The power supply i s des i g ned for i n door use only. Avoid usi ng

the power supply in wet areas.

 Unplug the power supply from power when not connected to

the device.

 Do not create a short circuit in the power output connector.

31

Juno T41

User Manual

Chapter 4 Connecting to a PC and Synchronizing Information

You can take information from your computer wherever you go by
synchronizing them to your device. The following types of
information can be synchronized:

 Microsoft Outlook® information, which includes Outlook e-mail,

contacts, calendar, tasks, and notes

 Notes, which are created using Microsoft® Office OneNote®

2007

 Media, such as pictures, music and video
 Favorites, which are the bookmarked links to your favorite

web sites

 Files, such as document s and other files

Before you can synchronize, you will first need to install and set up
either ActiveSync or Windows Mobile Device Center on your
computer.

After installing the synchronization software on your computer,
connect the phone t o y our co mputer usi ng t he T41 USB Client cable.
Upon connecting the client cable to your device and your computer,
choose to start the synchronization process.

ActiveSync or Windows Mobile Device Center only synchronizes
data on your computer and phone. If you have installed a storage
card and you want to back up files from the storage card, use
Windows Explorer on your computer to copy files from the storage
card to your computer.

If you are sending your device to your local dealer or service center
for repair or a hard reset, data from your device will be lost. It is
recommended that you sync your device to your computer to back
up your files. To back up files fro m th e s tor ag e c ar d to your computer,
use Windows Explorer to copy files from the storage card to the
computer.

32

Juno T41

User Manual

4.1 Setting up Windows Mobile® Device Center

Microsoft Windows Mobile® Device Center is the replacement for
Microsoft® ActiveSync® on Windows Vista® and newer. Some
versions of Windows Vista® come with Windows Mobile Device
Center already installed. If Windows Mobile Device Center is not
available on your Windows Vista®, you can download it from the
Microsoft website. Go to http://www.microsoft.com and search for
Windows Mobile Device Center. When you connect your device to
your computer and start Windows Mobile Device Center for the first
time, you are asked to create a Window s Mob il e par t ner s hi p wi th
your device. To create a partnership:

1. Connect your device to your PC. Windows Mobile Device Center
configures itself and then opens.

2. You are given the option to Register Online, Remind me Later,
or Don’t Register.

3. On the Windows Mobile Device Home screen, click Set up your

device.

NOTE: Choose Connect wi thout setting up your device if you

only want to tr ans fer media fil es, c heck for up dates , and expl ore y our
device but not sync Outlook information.

1. Select the information types that you want to synchronize then
click Next.

2. Enter a name for your device and click Set Up.

When you finish the wizard, Windows Mobile Device Center
synchronizes your device automatically. Notice that Outlook e-mail
messages and other information will appear on your device after
synchronization.

Using Windows Mobile Device Center

To open Windows Mobile Device Center, click

> All Programs >

Windows Mobile Device Center on your Windows Vista or newer

computer.

33

Juno T41

User Manual

On Windows Mobile Device Center, you can do the following:

 Click Mobile Device Settings to change synchronization

settings.

 When you click Pictures > Music and Video > <XX> new

pictures/video clips are available for import, a wizard

guides you to tag and transfer photos from your device to the
Photo Gallery on your computer.

 Click Pictures > Music and Video > Add media to your

device from Windows Media Pl ayer to sy nchr oniz e music and

®

video files using Windows Media

Player.

 Click File Management > Browse the contents of your

device to view documents and files on your device.

NOTE: See Windows Mobile Device Center H elp for more
information.

4.2 Setting up ActiveSync®

On a Windows® XP computer, you need to use Microsoft
ActiveSync® 4.5 or later. If you do not have this software on your
computer, you can download it from the Microsoft website. Go to

http://www.microsoft.com and search for ActiveSync.

Setting up synchronization in ActiveSync

1. Connect your device to your computer. The Synchronization
Setup Wizard automatically starts and guides you to create a

synchronization partnership. Click Next to proceed.

2. To synchronize your device with your computer, clear the
Synchronize directly with a server running Microsoft Exchange
check box, and then click Next.

3. Select the information types that you want to synchronize, then
click Next.

4. Select or clear the Allow wireless data connect ions check box
according to your preference.

34

Juno T41

User Manual

5. Click Finish.

When you finish the wizard, ActiveSync synchronizes your device
automatically. Notice that Outlook e-mail messages and other
information appear on y our dev ic e after synchronization.

4.3 Synchronizing with your computer

Connect your device to your PC to synchronize the information
between your device and PC. While your device is connected,
ActiveSync (or Windows Mobile Device Center on your PC)
synchronizes every time you make a change on either the PC or
your device.

Starting and stopping synchronization

You can manually synchronize either from your device or computer.
From your device:

1. Click > ActiveSync, and then click Sync.

2. To end synchronization before it completes, click Stop.

TIP: To delete a partnership with one computer completely,

disconnect your device from that computer first. In ActiveSync on
your device, tap Menu > Options, select the computer na me, then
tap Menu > Delete.

From Windows Mobile Device Center:

1. Click

> All Programs > Windows Mobile Device Center.

2. Click at the lower left of the Windows Mobile Device
Center.

3. To end synchronization before it completes, click .

From ActiveSync on your computer:
When you connect your device to your computer , Acti veSync

automatically opens on your computer and synchronizes.

1. To manually start synchronization, click .

2. To end synchronization before it completes, click .

35

Juno T41

User Manual

Selecting information to synchronize

You can change the information types and the amount of information
to synchronize for each type either on your device or your computer.
Follow the steps below to change synchronization settings on your
device.

Before changing sy nchr oniz ation s etting s on y our dev ice, disconn ect
it from your computer.

NOTE: It is not possible to set ActiveSync Options if your device has
not yet synchronized with your PC.

1. In ActiveSync on your device, tap Menu > Options.

2. Select the check box for any items you want to synchronize.
If you cannot select a check box, you might have to clear the
check box for the same information type elsewhere in the
list.

3. To change synchronization settings for an information type,
for instance, E-mail, select it and tap Settings.

4. You can then set the download size limit, specify the time
period of information to download, and more.

Some information types such as Favorites, Files and Media cannot
be selected in ActiveSync Options on your device. You can only
select or clear these items from your computer’s Windows Mobile
Device Center or ActiveSync.

A computer c an have s ync p artnershi ps w ith many dif fer ent Windows
Mobile powered phones, but a phone can have sync partnerships
with at most two computers. To ensure that your device will
synchronize properly with both computers, set up the second
computer using the same synchronization settings you used on the
first computer.

Outlook e-mail can be synchronized with only one computer.

Troubleshooting sync connection problems

In some cases, when t he compu ter connec ts to the Inter net or a l ocal

36

Juno T41

User Manual

network, it may disconnect the connection with your device in favor
of the Internet or network connection.

If this happens, on th e devi ce, cl ick > Settings > Connections >
USB to PC, then clear the Enable advanced network functionality
check box.

37

Juno T41

User Manual

Chapter 5 Using the Phone

NOTE: Not all Juno T41 models feature a GSM phone and WWAN

feature. This section applies to the T41 X models only. Do not place
a SIM card in T41 C or T41 M models.

Before us ing the phone feature, purchase a GSM cellular voice or
data plan from a GSM cellular service provider.

You can use Phone to make phone calls, set up speed dials, keep
track of calls, and send SMS messages just like the standard
features of a mobile phone. Also, there are several dialing features
unique to your devi ce. For example, y ou can t ake no tes whi le talk ing,
dial directly from Contacts and easily transfer contacts between your
SIM card and the storage of your device.

The Phone screen lets you open, call, or find a contact, or save a
new number in Contacts. To open the Phone screen, t ap the phone

option on the Home screen, or tap > Phone.

5.1 Maki n g a call

You can make calls from the Phone screen, from Contacts screen,
from Speed Dial and from Ca ll His tory.

Making a call from the Phone screen

1. Open the Phone screen.

2. Enter the phone number by tapping numeric buttons on the

38

Juno T41

User Manual

screen.

3. Tap the Back icon( ) if you need to delete a number.

4. Tap Talk ( ) to begin the call.

TIP: When you tap a key on the on-screen keypad, a list of names
and numbers is displayed as your device searches Contacts, Call
History, and Speed Dial to fi nd a matc hing na me or number. The next
key you tap conti nues t o narr ow the searc h. When you s ee the n am e

of the person you want to call, tap it and t ap Talk ( ).

Making a call from Contacts

1.

> Contacts.

2. Select the desired contact.

3. Select the number to call, and then tap .

Making a call from Call History

1. Open the Call History screen (from the phone screen).

39

Juno T41

User Manual

2. Select the number to call, and then tap .

Making an international call

Tap and hold the 0 (Zero) key on the keypad until “+” symbol
appears.

Enter the full pho ne n u mber y ou want to dial, and t ap Talk (

).
The full phone numb er incl udes t he count ry code, are a cod e (w it hout
the leading zero, if any), and phone number.

Making an emergency call

Enter the emergency number for your locale and then tap the Talk
(

).

5.2 Receiving and ending a call

When you receive a phone call, an incoming call message appears
on the screen and you are given the option to answer or ignore it.

40

Juno T41

User Manual

 To answer the call, tap
 To reject the call, tap

TIP: To adjust the in-call volume, press the VOLUME ＋ / － button
on the left side of the device.

Ending a call When a call is in progress, tap the End button to hang up.

5.3 Speed dial

You can create speed dial entries for freq uently-called numbers so
you can dial a number by tapping a single key.

Using speed dial

1. Tap > Contacts.

2. Select a contact to view the contact details.

3. Select the desired ph one number and ta p M e nu ( ) > Add to

Speed Dial.

4. Specify the Name, Number, and Location assignment o f the

Speed Dial entry.

5. When done, tap OK.

NOTE: The first speed dial location is generally reserved for your
voicemail. Speed Dial uses the next available location by default.
If you want to place a number in a location that is already used,
the new number replaces the existing number.

41

Juno T41

User Manual

6. If you have assig ned a speed di al ( for ex ampl e, th e numb er 2 key )

to a contact in Speed Dial, you can simply tap and hold the 2 key
to dial the contact’s number.

5.4 Working with WWAN (mobile data service)

After purchas ing a da t a con necti on pl an from your local GSM cel lula r
provider, you can communicate from field to office, send e-mail
messages and send text messages.

You will need a SIM card from your provider, and you should install it
per the instruction in chapter 1. 2 Ins er ti ng th e storage card and the
SIM card.

NOTE: When browsing the internet using the cellular connection,
you must turn off the Wi-Fi (802.11) or the device will default to the
Wi-Fi to browse.

CAUTION:

 DO NOT use your device while driving a moving vehicle.
 When you are on an airplane, in a medical facility or at other

facilities where wireless communication devices are not
allowed, access the Power Menu to Enable Airplane mode.
Simply pressing the POWER button off to put the device in
Sleep mode does not turn off these communication radios.

5.5 Working with CellSt art

Follow the instruc tio ns bel ow to us e Cell Star t to c onfig ure the c ellul ar
data connection.

1. Tap > CellStart. (You may need to tap OK to agree to the

terms to open the prog ram.) U nder Available Settings, tap the [+]
by your country to expand carriers.

2. Tap the [+] by the carrier you have signed up with and highlight

Typical and tap New. (If using multiple configuration settings,
you can tap on the primary setting and tap Default.)

3. Ensure the phone is turned on. Tap > Settings >

Connections > Wireless Manager > Phone.

42

Juno T41

User Manual

4. Test the settin gs by tapping > Internet Explorer and then

browse to a web page. The phone will automatically open a data
connection when you try to open a web page.

5. If the phone will not connect, try other settings before calling the

carrier technical support.

6. You can also manually change modem settings by tapping >

Settings > Connections > Connections.

7. NOTE: Once connected, G (GPR S) or E ( ED GE - a faster form of

GPRS) or H (HSDPA) will automatically appear in the notification
bar depending on the network capabilities in that area; some
service providers may only provide GPRS.

Removing cellular data settings

1. Tap > CellStart.

2. Tap Refresh to see the current list of configurations.

3. Select the configured data setting you wish to remove.

4. Tap Remove and OK.
NOTE: After removing a default configuration, the top setting will

become the new default.
To access the detailed settings for each configuration, tap Menu >

Open Connections Applet to change the modem connections.

5.6 Customizing your phone

Tap > Settings > Personal > Phone. The SIM card must be
installed and the phone turned on to view the settings.

Sounds: Tap to make changes.

 Phone Number: The SIM card phone number is displayed.
 Ring type, Ring tone and Keypad sounds: Choose the

sounds you want for text messaging notifications.

Security: A PIN can be set or changed to bloc k una ut h or i z ed ac cess
to your phone connection.

Services: Settings can be changed for Call Barring, Caller ID, Call

43

Juno T41

User Manual

Forwarding, Call Waiting, Fixed Dialing and Voicemail and Text
Messages.

Network: Find and set your preferred networks.
Version: Vi ew the RIL, MUX, RHA and AUD versions, as well as the

Manufacturer, Model and Revision number of the WWAN module.
Info: Information about your phone hardware ID number, current

signal strength, cell tower ID number and more.

 IMEI: The unique number that identifies the phone module

that is embedded in the device. (If you purchase a SIM card
separately, the phone service provider may want your IMEI
number. It is located on this screen.

 IMSI and ICCID: Unique numbers embedded on the SIM

card.

 Signal Strength, Cell ID, Location Code and Network

Code are also listed under the info tab.

Band: Leave all the settings selected unless you are instructed by

Technical Support to make an adjustment.

5.7 Browsing the Internet Tap > Internet Explorer, and enter the address of a web site.

Internet Sharing

The Internet ser vice from y our device can be shared w i th a computer.
Tap > Internet Sharing. You can connect either through USB or

Bluetooth.

5.8 SMS messages

You can send a SMS (short message s erv ice) i n much th e sa me w ay
as a typical mobile telephone. Each SMS text message can contain
a maximum of 160 characters or less, depending on your service
provider.

To send a message from the Home screen, tap text > Compose.
To send a message from the Start screen, tap Text > Menu > New.

44

Juno T41

User Manual

5.9 Sending and receiving e-mail E-mail setup: Tap > E-mail > Setup E-mail. Follow instructions

to set up the email service. You can synchronize with a POP Mail
server, or with a Microsoft Exchange® server.

Sending and receiving messages: Tap > E-mail and select an
email account. Tap New to compose a message and tap Send. Input
the contact information. Depending on your account settings, your
device will check for new e-mail periodi cal l y. You can force a
download of new messages, by tapping Menu > Send/Receive.

45

Juno T41

User Manual

Chapter 6 Using Additional Hardware Features

6.1 Flashlight

The dual LEDs for the camera flash can also be used as a flashl i g ht .
Tap > Flashlight to toggle the Flashlight on and off.

6.2 Assigning Buttons (hardware buttons)

Tap > Settings > Personal > Buttons. Under Program Buttons,
your favorite programs can be assigned to several of the device
buttons. The list of assignable buttons is shown on the left hand side
with the program that is assigned by default on the right. To reassign
a button, select the button in section 1 and change to the desired
program or action from the pull -down list in section 2.

You can customize the way your Up/Down control repeats by
changing the settings under the Up/Down Control tab.

CAUTION: Assigning a butt on to ac ti vate a program may disable the
use of that button for s peci fic uses in other pr og rams. For ex ample, i f
the ACTION button is assigned to open a specific program, it will no
longer trigger the camera application to capture an image.

6.3 Compass Calibration

To re-calibrate the compass, tap > Settings > System >
Compass Calibration. Follow the instructions on the screen.

1. Set the device on a level surface and tap Calibrate.

2. Wait 3 secon ds an d then turn the device aro u nd, s pi n ni ng i t on i ts

back without lifting or tilting the device. Complete at least a full
rotation in 10 seconds.

3. Repeat as necessary if the calibration fails.

46

Juno T41

User Manual

6.4 Working with Bluetooth

If your device comes with built-in Bluetooth capability, you can
wirelessly transmit data to and from your device by connecting to
available Bluetooth enabled devices. To find out if you have

Bluetooth installed in your device, tap > Settings > System >
System Information > Wireless.

Bluetooth capability is a short-range wireless communication
technology that exchanges information (beam) over a distance of up
to 30 feet (10 meters) without requiring a physical connection.

Bluetooth settings: tap > Settings > Bluetooth.
Mode: To enable Bluetooth, select the check box Turn on

Bluetooth. If you want other Bluetooth devices to find your device,

also check the Make this device visible to other devices
checkbox.

Devices: Tap Add new device to search for other Bluetooth dev ices.
For enhanced security, use passcodes.

COM Ports: A vailable only for Bluetooth-connected devices that
support serial (COM) connections.

Wake Settings: Allow Bluetooth activity to turn the device on.
When this check box is selected, another Bluetooth device can send
data and your device will turn on and reply if necessary, but only if
Bluetooth is enabled.

NOTE: It is recommended that your device be configured to
automatically turn off when not in use. Otherwise, another Bluetooth
device could turn on your device, transfer data and if Juno T41 does
not turn off again, drain the battery.

Receiving Beams: To allow the device to receive incoming beams,
tap > Settings > Connections > Beam to open the Beam
screen. Check the Receive all incoming beams checkbox and tap

OK.
Creating a Bluetooth Partnership: Bluetooth partnership s ar e

required for connections to some PC’s, printers, and headphones.
Configuring Bluetooth connections vary depending upon how each

47

Juno T41

User Manual

Bluetooth device works. Refer to all device documentation.

1. Tap > Settings > Bluetooth > Mode. Ensure that both

devices have Bluetooth turned on in the Mode area, are visible
and within close range.

2. Tap Devices > Add new device… W a i t a few mome nt s while

your device searches for Bluetooth devices.

3. Tap the name of the other Bluetooth device and t ap Next. For

enhanced security, use passcodes. Enter the same passcode on
the other device.

4. Under Advanced, you can change the name o f the other device

and add additional services, if available. Tap Save.

Creating a Bluetooth connection with a PC:

1. Ensure that your PC has connectivity software installed and has

Bluetooth hardware.

2. Set up a partnership between your device and the PC. Refer to

your PC documentation for instructions.

3. Once shown, select the PC from the Device list and tap Next.

4. Enter the passcode, if necessary and tap Next.

5. Confirm that ActiveSync service is available and place a check in

the check box and tap Finish.

6. Tap > ActiveSync > Menu > Connect via Bluetooth.
Bluetooth-enabled headphone: You can use Bluetooth stereo

headphones (A2DP) or a Bluetooth headset (HFP/HSP). Any
Bluetooth audio device supporting the A2DP, HFP, or HSP profiles
should be compatible. Many Bluetoo th hea dphones do not require a
passcode to pair with your device.

Troubleshooting Bluetooth connection problems: If your device
cannot find another Bluetooth device, confirm that the device is
within range (less than 30 feet / 10 meters) and no large objects
obstruct the path of other Bluetooth-enabled devices. Confirm that
the device is turned on and has been configured to be discoverable.

48

Juno T41

User Manual

6.5 Working with Wi-Fi

If your device comes with built-in Wi-Fi capability, you can wirelessly
transmit data to and from your device by connecting to available
access points or hot spots. To find out if you have Wi-Fi installed in

your device, tap > Settings > System > System Information >
Wireless.

The Wi-Fi is off by de faul t; how ev er t he on/o f f st at e will persist after a
reset. To turn the Wi-Fi on or off, do one of the following procedures:

 Touch the Title bar, tap the Connectivity icon and tap

Wireless Manager to open the Wireless Manager screen,
and tap Wi-Fi.

 Tap > Settings > Connections > Wireless Manager and

tap Wi-Fi.

Once the Wi-Fi is turned on, it detects the wireless networks in the
vicinity and gives you the option to connect to one. Turn Wi-Fi off
when not in use to save battery power and possibly speed up other
processes.

1. Wi-Fi by default is off. Tap Wi-Fi on the Wireless Man ager screen

to enable Wi-Fi as necessary.

2. After a few seconds, a Multiple Networks Detected or Network

Detected pop-up window appears.

3. Tap the network to connect to and tap OK.

4. If the network req ui r es auth enti ca t ion, t he N et work Log On dialog

will open. For networks that require network keys, enter the
network key into the dialog box and tap Connect to begin using
the network.

5. Under Network A dapters tab, changes can be made to what

49

Juno T41

User Manual

your network card connects to and to modify adapter settings.

To update Wi-Fi connection settings:

1. On the Wireless Manager screen, t ap Menu > Wi-Fi Settings.

2. Tap the name of the network to update the settings for.

3. The Configure Wireless Network wizard appears. Update

settings and tap Next as needed to progress through the wizard.

4. Tap Finish to close the wizard and save the settings.

NOTE: If your device is connected to a PC that is connected to the
Internet, the device w il l use the PC’s Internet connect ion and Wi-Fi
will not appear on the Wireless Manager screen. You may allow the
simultaneous use of the PC and the Wi-Fi module by doing one of
the following:

 In the ActiveSync software on your PC, select File >

Connection Settings and check the Allow wireless

50

Juno T41

User Manual

connection on the device when connected to the desktop

checkbox.

 In Windows Mobile Device Center software on your PC, click

Mobile Device Settings > Connection Settings and check
the Allow data connections on device when connected to

PC checkbox.

Using ActiveSync via Wi-Fi

Exchange ActiveSync, a component of Exchange Server, facilitates
data synchronization between your device and an Exchange server.
This synchronization can occur over a network connection, allowing
you to update calendars, contacts, tasks and the Inbox on your
device without directly connecting to a PC. The server must be
running Exchange Server 2003 SP2 or later.

To use Exchange ActiveSync, confirm with your system
administrator that an Exchange Server is available. The
administrator will provide you with a login name, password, server
name, and domain name. To configure Exchange ActiveSync on
your device:

1. Tap > ActiveSync > Menu > Add Server Source .

2. Enter your email address and tap Next.

3. Enter the User name, Password and Domain and tap Next.

4. The Automatic Configuration dialog will appear while the device

attempts to connect to Exchange Server. If the system
encounters difficulty, follow the directions of the dialogs that
appear, such as the Edit Server Settings dialog.

5. Choose the data types you want to synchronize and tap Finish.

Enter the server address and confirm with your administrator
whether the Exchange server requires an encrypted (SSL)
connection. Tap Next.

Troubleshooting Wi-Fi connection problems: If the device seems
to be connected to the network, but you are having difficulty using

51

Juno T41

User Manual

the network connection, tap > Settings > Connections > Wi-Fi.
The Network Cards window will open and allow you to confirm that
the connection is appropriately configured as either a Work or
Internet connection. If you are unable to connect to a network, try
connecting to another network without any security, such as a Wi-Fi
hotspot, to determine if the issue is the hardware or the network.

Using the Summit Utilities

The Juno T41 software includes a Wi-Fi connecti on ma nag e men t
and monitoring utility called the Summit Client Utility (SCU). SCU
allows you to view all radio and security settings, and status; and
enables you to troubleshoot connectivity issues.

The SCU software is useful for establishing network connections on
networks that require more complex settings than the Configure
Wireless Network wizard provided in the Windows Embedded
Handheld operating system.

For more information how to use the SCU, please visit:

http://www.summitdata.com/documentation.html and click on the

User’s Guide.

52

Juno T41

User Manual

Accessing the Summit Client Utility

To access SCU, tap > Settings > Connections > Wi-Fi. The
Summit Client Utility window appears.
NOTE: There are two icons labeled Wi-Fi.

SCU has five tabs which may be accessed from the top of the
screen:

 Main
 Profile
 Status
 Diags (for troubleshooting)
 Global

53

Juno T41

User Manual

To view a tab, tap the tab bar at the top of the screen, or slide your
finger left or right to view the next tab.

Main Window

The Main window provides an overview of the current wireless
network connection configuration (Active Profile), a snapshot of
connection information, and additional information regarding SCU
(About SCU). You can also import and export setting s config urations ,
which is useful if you have multiple devices to configure to access
your local networks.

54

Juno T41

User Manual

Profile Window

Profile settings are radio and security settings that are stored for
each configuratio n pr o file. Tap New to create a new Profile and enter
in the necessary connection settings for a Wi-Fi network access
point. Scroll down to find the Commit button to save changes to the
Profile.

Status Window

The Status window provides status information on the radio
connection between the client device and the associated access
point.

Diags Window

The Diags window enables you to troubleshoot connection issues

55

Juno T41

User Manual

with SCU.

Global Window

Global settings include radio and security settings that apply to all
profiles and settings managed by SCU.

6.6 Working with the Camera

If your device comes with the built-in camera, you can capture
photos and videos. To find out if you have a camera installed in your

device, tap > Pictures & Videos. If you see the Camera icon,
your device has the camera feature.

To capture pictures and videos, open the camera application:

56

Juno T41

User Manual

1. Tap > Pictures & Videos.

2. Tap the Camera icon or the Camera tile, or press the LEFT

button to activate the Camera tile.

The camera application starts and soon displays a camera preview
on the entire display screen. The camera will be in either in Portrait
or Landscape mode as per the camera settings or according to the
device orientation. The Title bar and Tile bar will not be visible.

User Interface

A tap on the preview screen shows the camera application interface
buttons over the preview. Tap on the up arrow ( ) to display the
pop-up menu system and to access various camera features and
settings.

Tap on the down arrow ( ) to exit the menus.

Thumbnail Window

A thumbnail image is s hown on top of the preview screen. This is the
most recent image captured using the camera application. Tap on

57

Juno T41

User Manual

the thumbnail to return to Microsoft Pictures & Videos window and
display a thumbnail preview of saved image and video files.

Capturing Images

If preview not focused, a quick double-tap on the prev i ew screen
focuses the image (if focus is enabled in settings menu). Focus
success is indicated by a green box displayed at center of the
screen.

The image can be captured after this by tapping on the Camera icon
( ) when the user interface is viewable on the image preview.

You can also use the ACTION button to trigger the image capture.
Captured images are saved with the file extension of .JPG.

Capturing Videos

The camera application will switch from image mode to video mode
by tapping the video icon ( ) below the thumbnail window. In

video mode, the similar icon is used to switch to Image mode.
A tap of the capture/record button ( ) will start capturing the

video.

58

Juno T41

User Manual

Captured video files are saved with the file extension of .WMV.

Closing application

To close the camera application, tap on the close (X) mark at the top
right corner of the preview or press the OK button.

Image Camera Application Features

Tap on the up arrow (

) to display the pop-up menu system to
access various features and settings. The features and settings are
described below.

White Balance ( )

A tap on the White Balance icon, displays the following options.

 Auto: Select this option to adjust the White Balance

automatically while taking pictures and videos in different
lighting conditions.

 Sunny: Select this option when tak ing pictures and videos in

full sunlight.

 Incandescent: Sel ec t thi s opt ion w hen taking pictures and

videos in places lit with Incandescent lighting.

 Fluorescent: Select this option when taking pictures and

videos in places lit with Fluorescent lighting.

Selection of any opt ion appl ies th at se tting to camer a prev iew and to
images captured.

Zoom Levels (

)

A tap on the Zoom icon displays the levels of digital zoom supported
by camera application.

 1.0x [Minimum Zoom]
 1.5x

59

Juno T41

User Manual

 2.0x
 2.5x
 3.0x
 3.5x
 4.0x [Maximum Zoom]

Selection of any opt ion appl ies th at se tting to camer a prev iew and to
images captured.
NOTE: The Image Tagging of date-time and GPS on the image is
not compatible with a Digital Zoom setting other than 1. 0x . The EXIF
tagging is not affected by Digital Zoom.

Brightness ( )

A tap on the Brightness icon enables adjustment of the Brightness
offset.

 +3 [Maximum Brightness ]
 +2
 +1
 0 [Normal Brightness]
 -1
 -2
 -3 [Minimum Brightness]

Selection of any opt ion appl ies th at se tting to camer a prev iew and to
images captured. Increase the Brightness if the subject is
underexposed, or decrease the Brightness if the subject is
overexposed. A common situation requiring adjustment to
Brightness is capturing a scene with high contrast caused by direct
exposure of light sources or areas of shading or shadows.

Flash Settings ( )

A tap on the Flash Settings icon displays the following options.

 On: Selection of this option enable the flash icon ( ) on the

screen and dual LEDs will flash while capturing images.

 Off: Selection of this option disables the LED flash.

60

Juno T41

User Manual

 Auto: Selection of this option enable the LEDs to flash if

needed to illuminate the scenes with low-light. The auto flash
icon ( ) will display on the screen.

Image Quality ( )

A tap on the Image Quality icon displays the following options.

 Economy: Select this option should save the captured image

with low quality (high compression).

 Normal: Select this option should save the captured image

with medium quality (medium compression).

 Fine: Select this option should save the captured image with

good quality (low compression).

 Super Fine: Select this option should save the captured

image with very good quality (very low compression).

Images will be stored with the selected quality and the file size of
the image increases as quality increases.

Camera Settings ( )

A tap on the Settings icon displays the sub menu which has Still
Resolution, Storage Selection, Focus, Image Review, Image
Tagging and Application Settings. These sub menu options are

explained in further detail below.

Still Resolution

The still image resolution displays on the top right corner of the
preview window when the camera user interface is visible.

Two aspect ratios are available on the Juno T41:

 4:3
 5:3

4:3 ( )

The 4:3 image resolutions available are:

 1.3MP - 1280x960
 3MP - 2048x1536
 5MP - 2560x1920

61

Juno T41

User Manual

 8MP - 3264x2448

Select the desired image resolution.

5:3 ( )

The 5:3 image resolutions available are:

 WVGA - 800x480
 WXGA - 1280x768
 2.4MP - 2000x1200
 3.9MP - 2560x1536
 6MP - 3264x1960

Select the desired image resolution.

Storage Select ( )

Tap on the Storage Select icon to display the following options:

 Main Memory: Save images to the on-board storage.
 SD Card: Save the images to the microSD card. This item is

not selectable if no microSD card is installed.

Focus ( )

Tap on the Focus icon to display the following options.

 Enable: This enables the Auto Focus feature, which is

activated with double-tap on the image preview.

 Disable: This disables the Auto Focus feature.

Image Review (

)

A tap on the Image Review icon will display the following options.

 2 Seconds: The captured image is displayed for 2 seconds.
 3 Seconds: The captured image is displayed for 3 seconds.
 User Prompted: The capture d im ag e is displayed until the

user indicates to delete or save the image. See below for
further information.

 Off: The captured image is not displayed. This mode is useful

for capturing images as quickly as possible.

Image Tagging ( )

62

Juno T41

User Manual

Image tagging is the capture of date, time and location data on your
images. The data may be stored in the EXIF data or both the EXIF
data and on the vi s ibl e image.
A tap on the Image Tagging icon will display the following sub menu
and options.

 Date

Date Source:

 Device Date-Time: Fetch the date-time from the device

real-time clock.

 GPS Date-Time: Fetch the current GPS date-time.

NOTE: If the curr ent G PS ti me is n ot av ail able ( due t o lack of

GPS signal), the Device Date-Time is used.

Stamp Settings:

 EXIF: Store the date-time information as EXIF data.
 EXIF & Stamp: Store the date-time information as EXIF data

and embedded on the visible image.

 Off: Do not store date-time information.

 GPS

Format:

 Deg/Min/Sec: Format in Degrees, Minutes, Seconds.
 Decimal Degree: Format in Degrees with decimal precision.

Stamp Settings:

 EXIF: Store the location information as EXIF data.
 EXIF & Stamp: Store the location information as EXIF data

and embedded on the visible image.

 Off: Do not store date-time information.

APP Settings ( )

Tap on the APP Settings icon to display a sub menu with the options
described below.

 UI Orientation

 Rotation on Tilt: Enable the automatic rotation of the

camera user interface based on device orientation/tilt.

 Fixed Landscape: Lock the camera application in

63

Juno T41

User Manual

landscape mode.

 Fixed Portrait: Lock the camera application in portrait

mode.
NOTE: This option only applies to the image capture and

does not apply to video capture, which is only available in
fixed landscape mode.

 Sounds

 Enable: This option enables the beep sound while focusing

and click sound for capturing the images.

 Disable: This option disables the sound while focusing and

capturing the images.

 Modify Prefix

Select the Modify Prefix option to display the pr e fix window
enabling you to edit the prefix of Image and Video files. By
default, Image files append with prefix IMG and video files
append with VID.

The file is saved with a name that is auto generated with the
prefix followed by a four digi t num ber. The number is sequent ial .

Image Delete and Switch to Camera in Image review mode

When the Image Review mode is User Prompted, the camera
application will display the capture image and show two icons.

• DELETE ( )

Tap the delete icon to delete the image from the storage.

• CA MERA ( )

Tap the camera icon to save the image and return to image preview
mode.

Video Camera Application Features

Tap on the up arrow ( ) to display the pop-up menu system to
access various features and settings. The features and settings are
described below.

Many of the settings for image capture are the sa me for vi deo
capture, and these include White Balance, Brightness and Focus.

64

Juno T41

User Manual

Settings unique to video recording are as follows:

• Audio settings ( )

Tap the Audio Settings icon to display the following
options:

 Enable: Audio capture from the MICROPHONE is enabled

while recording.

 Disable: The video that is recorded does NOT include any

sound from the MICROPHONE.

• Video Settings ( )

 Resolution ( )

Tap the Video Resolution icon to display the f oll owing

options:

 QVGA - 320x240
 VGA - 640x480
 WVGA - 800x480

Selection of any option applies that setting to camera
preview and to videos captured.

 Storage Select ( )

Tap the Storage S elect ic on to displ ay the follow ing options:

 Main Memory: Save videos to the on-board storage.
 SD Card: Save the videos to the microSD card. This item is

not selectable if no microSD card is installed.

• Video Review ( )

Tap the Video Review icon to display the following options:

 On: If selected, the video review mode is enabled. After

video capturing is completed, video review window enables
the user to review the capture video by playing it back. Also,
DELETE and VIDEO icons are enabl ed in the review window.
A tap on the Delete ( ) icon, will delete the video file and

return to the vi deo pr e view window. A tap on the Vi d eo ( )
icon will save the video file and return to the video preview
window.

65

Juno T41

User Manual

 Off: If selected, the video review feature is disabled. The

application will return to the preview window after capturing
the video and storing the vi deo fil e.

• Pause Time-out ( )

Tap the Pause Ti me-out icon to display the following options:

 10 seconds
 20 seconds
 60 seconds
 Disable

Select an option to specify the timeout duration of the
PAUSE feature while recording.

While recording has the option to be STOPP ED ( and saved)
or being PAUSED and cont inued. If paused, the video
recording pauses for the selected time-out. Then the pause
icon changes to a record icon, enabling the user to resume
recording. The Stop icon ends the recording and saves the
video file.

66

Juno T41

User Manual

6.7 Working with GPS

Tap > Settings > System > System Information > Wireless to
see if your device has GPS installed. COM2 is the dedicated
hardware port for the built-in GPS (COM1 is dedicated to the
external 9-pin).

The GPS is compatible with applications that accept the NMEA
position information using a default baud rate of 38400.

GPS settings:

If you are using only one GPS-aware application, these settings do
not need to be changed. However, to use multiple GPS-aware

applications, ta p
following tabs:

 Access: The GPS Intermediate Driver (GPSID) allows

multiple applications to access the GPS receiver. If the check
box is unchecked, the GPSID is disabled.

 Hardware: COM2 is the hardware port dedicated for the

built-in GPS. Verify that COM2 is selected. The internal GPS
communicates at 38400 baud by default. If it has been
modified by a third-party program, adjust to match the
receiver baud rate.

> Settings > System > GPS and select the

 Programs: Programs that use GPS need to know which COM

port to use to access GPS data. When using more than one
GPS-aware application, the same GPSID port must be used
in each application. Ensure that the COM port on the
GPS-aware application(s) is set to the same GPSID port as
shown in the Programs tab of the GPS applet. The program
port must be a differen t port than the hardware port. By
default, the GPS program port is COM3 and should not be
modified unless directed by Technical Support.

NOTE: Some GPS-aware applications may not communicate over
GPS program ports.

67

Juno T41

User Manual

Exiting GPS applications

Any time you exit a GPS application (such as SatViewer) it is
advisable to close the port gracefully, e.g. tap Disconnect from GPS
and then exit the application. Failure to do so may leave the port
open and hinder the next GPS operation.

6.8 SatViewer

SatViewer provides information such as your current longitude,
latitude, elevation, how many GPS satellites are visible and the
quality of the computed coordinates.

To open SatViewer, tap

> SatViewer. To begin monitoring GPS

satellites, tap t he GPS tab and the Connect to GPS button.

NOTE: External GPS receivers, Bluetooth GPS receivers or other
external GPS devices are not supported and may not work correctly
with SatViewer.

6.9 Battery Logger

The battery logger is useful for monitoring battery performance
under certain user scenarios or to check if the battery has a
performance issue.

To run the Battery Logger, tap > File Explorer. In the Windows
folder, find batlog and tap it to start the program. Tap File > Start

68

Juno T41

User Manual

Battery Logging. The software will prompt you to specify where to

log the data file.
The program analyzes and logs the following information about the

battery:

- Charge cycles begun and % capacity at initiation

- Charge cycles fully completed

- Aborted charge cycles and % capacity at termination

- Provide notification when the number of charge cycles reaches
90% of the max

69

Juno T41

User Manual

Appendix A : Regulatory Compliance

U.S.A. - FCC Statement

This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that int er ference w i ll not oc cur i n a par ticul ar inst al lati on. I f
this equipment does cause harmful interference to radio or tel evision
reception, w hic h can be determine d by turning the equipment off and
on, the user is encour ag ed to try to cor rect t he int er ference by one o r
more of the following measures :

–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equip ment i nto a n outl et on a cir cuit di f ferent fro m that

to which the receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

Exposure to Radio Frequency (RF) Signals

Your device contains a radio transmitter and receiver. The radiated
output power is far below the international radio frequency exposure
limits. These limits are part of comprehensive guidelines and
establish permitted levels of RF energy for the general populatio n.
The guidelines are based on the safety standards previously set by
international standards bodies:

• American National Standards Institute (ANSI) IEEE.

C95.1-1992.

• National Council on Radiation Protection and Measurement

(NCRP). Report 86. 1986.

70

Juno T41

User Manual

• Int’l Commission on Non-Ionizing Radiation Protection

(ICNIRP) 1996.

• Ministry of Health (Canada), Safety Code 6. The standards

include a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.

SAR: 0.545w/kg
Use of unauthorized or modified antennas may impair call quality

and damage the phone, causing loss of performance. To assure
optimal phone performance and ensur e hu ma n expos ur e to RF
energy is within the guidelines set forth in the relevant standards;
always use your device only in its normal-use position.

Avoiding contact with the antenna area when the phone is IN USE
optimizes the ante nn a performance.

Telecommunications & Internet Association (TIA) information

Hearing Aids: Some digital wireless phones may interfere with
some hearing aids. In the event of such interference, you may want
to consult your wireless service provider, or call customer service to
discuss alternatives.

Pacemakers and Other Medical Devices: The Health Industry
Manufacturers Association recommends a minimum separation of
six inches be maintained between a handheld wireless phone and a
pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with the independent
research by and recommendati ons of Wireless Technology
Research. Persons with pacemakers should use the ear oppos ite
the pacemaker to minimize the potential for i nterference. Persons
with pacemakers should exercise great caution if using a hands-free
device such as a head set, as th ese per sons may be at great er risk o f
the device not maintaining the recommended minimum six inches of
separation fro m the p a c emak er. If you have any reason to suspect
that interference is taking place, turn the phone OFF immediately.

71

Juno T41

User Manual

If you use any other personal medical device, consult the
manufacturer of your device to determine if they are adequately
shielded from external R F energ y. Your physician may be able to
assist you in obtaining this information.

Turn the phone OFF in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or health care
facilities may be using equipment that could be sensitive to external
RF energy.

Canada Compliance, Industrie Canada (IC)

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de classe B est conforme à la norme NMB-003.

This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.

Cet appareil est conforme avec Industrie Canada RSS standard exempts de
licence (s).

Son fonctionnement est soumis aux deux conditions suivantes:
(1) cet appareil ne peut pas provoquer d'interférenc es et
(2) cet appareil doit accepter toute interférence, y compris les interférences

pouvant entraîner un mauvais fonctionnement de la appareil.

RF Radiation Exposure Statement:

For body worn operation, this phone has been tested and meets RF exposure
guidelines when used with an accessory that contains no metal and that positions
the handset a minimum of 1.5 cm from the body.

Use of other accessories may not ensure compliance with RF exposure
guidelines.

Déclaration de l'exposition aux ra d iations RF:

Pour le fonctionnement du corps, ce téléphone a été testé et répond aux directives
d'exposition RF lorsqu'il est utilisé avec un accessoire qui ne contient pas de métal
et qui place le combiné d'un minimum de 1.5 cm du corps.

Utilisation d'autres accessoires peut ne pas assurer le respect des directives
d'exposition RF.

72

Juno T41

User Manual

RoHS Statement

This device conforms to RoHS (Reduction Of
Hazardous Sub-stances) European Union
regulations that set maximum concentration limits
on hazardous materials used in electrical and
electronic equipment.

CAUTION: RISK OF EXPLOSION IF BATTERY IS DISPOSED OF
INCORRECTLY. DISPOSE OF THE DEVICE AND THE BATTERY
ACCORDING TO INSTRUCTIONS FOR ELECTRONIC WASTE.

European Conformity Statement

Declaration of Conformity with Regard to the R&TTE 1999/5/EC and EMC 89/336/
EEC directives.

Europe

According to ISO / IEC Guide 22 and EN 450 14

Manufacturer’s Name: Trimble Navigation Limited.
Manufacturer’s A d dress: PO Box 947, Corvallis, OR 97339

USA
Declares, under our sole responsibility, that the product:

Product Name: Rugged Handheld Computer (JUNO/T41/5)
Model Number: JUNO/T41/5-BW; JUNO/T41/5;

JUNO/T41/5-BW
Regulatory Name: JUNO/T41/5-BW; JUNO/T41 /5;

JUNO/T41/5-BW
Product Options: ALL

73

Juno T41

User Manual

Conforms to the following Product Specifications:

EN 300 328: V1.7.1:2006
EN 301 489-1: V1.8.1:2008
EN 301 489-17: V2.1.1:2 00 9
EN 301 511:V9.0.2:2003
EN 301 489-07 V1.3.1:2005
EN 301 489-24 V1.4.1:2007
EN 301 908-1&2:V4.2.1:2010
EN 55022:2006, Amendment A1:2007
EN 55024:1998, Amendments A1:2001, A2:2003
CISPR 22:2005, Amendments A1:2005, A2:2006
R&TTE Directive 1999/5/EC
CFR 47, Part 15, Subpart B

Exposure to Loud Audio:

EN 61000-3-2:2006
EN 61000-3-3:2008
EN 61000-4-2:2001
EN 61000-4-3:2006
EN 61000-4-4:2004
EN 61000-4-5:2006
EN 61000-4-6:2005
EN 61000-4-11:2004
EN 60950-1:2001

Importer of Record: Trimble European Regional Fulfillment Center,

Logistics Manager, Meerheide 45, 5521DZ
Eersel, Netherlands.

74

Juno T41

User Manual

Environmental Hazards

The product complies with international RoHS regulations.

Toxic and Hazardous Substances and Elements

Poly-brom
inated

biphenyls
(PBB)

Part Name

Printed
Circuit

Assemblies

Display

Keypad

Housing

Hardware

Lead
(Pb)

Mercury
(Hg)

Cadmium
(Cd)

Hexavalent
Chromium
(Cr6+)

X O O O O O

X O O O O O

X O O O O O

O O O O O O
O O O O O O

Product Period does not include these items

Poly-brom
inated

diphenyl
ethers

(PBDE)

Battery

Power supply

Cable

Manual

Hand strap

X O O O O O

X O O O O O

O O O O O O
O O O O O O
O O O O O O

75

Juno T41

User Manual

Stylus pkg.

Companion
CD

O O O O O O

O O O O O O

Taiwan

低功率電波輻射性電機管理辦法

第十二條： 經型式認證合格之低功率射頻電機，非經許可，公司、商

號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功

能。
第十四條： 低功率射頻電機之使用不得影響飛航安全及干擾合法通

信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續
使用。低功率射頻電機需忍受合法通信或工業、科學及醫療用電波輻
射性電機設備之干擾。

SAR 標準值 2.0W/Kg，送測產品實測值為 0.545w/Kg

76