Trimble Juno 3B, Juno 3D User Manual

USER GUIDE

Trimble Juno Series Handhelds:

Juno 3B and Juno 3D

 Safety information

 About the Juno series

handhelds

 Getting started

 Using the Windows

Embedded Handheld
operating system

 Connecting to an office

computer

 Using the integrated radios

to connect to other devices

 Using the GNSS receiver

 Using the camera

 Troubleshooting

Version 1.00
Revision B
May 2012

F

Trimble Navigation Limited
10355 Westmoor Drive
Suite #100
Westminster, CO 80021
USA

www.trimble.com

Legal Notices

Copyright and Trademarks

© 2008-2012, Trimble Navigation Limited. All rights reserved.
Trimble, the Globe & Triangle logo, GPS Pathfinder, and Juno are

trademarks of Trimble Navigation Limited, registered in the United
States and in other countries. GeoBeacon, GPS Analyst, GPScorrect,
TerraSync, and VRS are trademarks of Trimble Navigation Limited.

Microsoft, ActiveSync, Excel, Outlook, PowerPoint, Windows, Windows
Live, Windows Media, Windows Mobile, Windows Vista, and the
Windows Start logo are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.

The Bluetooth word mark and logos are owned by the Bluetooth SIG,
Inc. and any use of such marks by Trimble Navigation Limited is under
license.

All other trademarks are the property of their respective owners.

Release Notice

This is the May 2012 release (Revision B) of the Juno Series Handhelds
User Guide, covering Models TNJ31 and TNJ32.The Juno series

handheld’s operating system is based on Microsoft Windows Embedded
Handheld 6.5 Professional operating system.

Limited Warranty Terms and Conditions

Product Limited Warranty

Subject to the terms and conditions set forth herein, Trimble Navigation
Limited (“Trimble”) warrants that for a period of (1) year from date of
purchase this Trimble product (the “Product”) will substantially
conform to Trimble's publicly available specifications for the Product
and that the hardware and any storage media components of the
Product will be substantially free from defects in materials and
workmanship.

Product Software

Product software, whether built into hardware circuitry as firmware,
provided as a standalone computer software product, embedded in flash
memory, or stored on magnetic or other media, is licensed solely for use
with or as an integral part of the Product and is not sold. The terms of
the end user license agreement, as included below, govern the use of the
Product Software, including any differing limited warranty terms,
exclusions and limitations, which shall control over the terms and
conditions set forth in the limited Product warranty.

Warranty Remedies

If the Trimble Product fails during the warranty period for reasons
covered by this limited warranty and you notify Trimble of such failure
during the warranty period, Trimble will repair OR replace the
nonconforming Product with new, equivalent to new, or reconditioned
parts or Product, OR refund the Product purchase price paid by you, at
Trimble’s option, upon your return of the Product in accordance with
Trimble's product return procedures then in effect.

How to Obtain Warranty Service

To obtain warranty service for the Product, please contact your Trimble
dealer. Alternatively, you may contact Trimble to request warranty
service at [phone] (24 hours a day) or email your request to

[e-mail]. Please be prepared to provide:

– your name, address, and telephone numbers;
– proof of purchase;
– a copy of this Trimble warranty
– a description of the nonconforming Product including the model

number; and

– an explanation of the problem.
The customer service representative may need additional information

from you depending on the nature of the problem.

Warranty Exclusions and Disclaimer

This Product limited warranty shall only apply in the event and to the
extent that (i) the Product is properly and correctly installed, configured,
interfaced, maintained, stored, and operated in accordance with
Trimble's applicable operator's manual and specifications, and; (ii) the
Product is not modified or misused. This Product limited warranty shall
not apply to, and Trimble shall not be responsible for, defects or
performance problems resulting from (i) the combination or utilization
of the Product with hardware or software products, information, data,
systems, interfaces, or devices not made, supplied, or specified by
Trimble; (ii) the operation of the Product under any specification other

than, or in addition to, Trimble's standard specifications for its products;
(iii) the unauthorized installation, modification, or use of the Product;
(iv) damage caused by: accident, lightning or other electrical discharge,
fresh or salt water immersion or spray (outside of Product
specifications); or exposure to environmental conditions for which the
Product is not intended; (v) normal wear and tear on consumable parts
(e.g., batteries); or (vi) cosmetic damage. Trimble does not warrant or
guarantee the results obtained through the use of the Product or
Software, or that software components will operate error free.

NOTICE REGARDING PRODUCTS EQUIPPED WITH TECHNOLOGY
CAPABLE OF TRACKING SATELLITE SI GNALS FROM SATELLITE BASED
AUGMENTATION SYSTEM S (SBAS) (WAAS/EGNOS, AND MSAS),
OMNISTAR, GPS, MODERNIZED GPS OR GLONASS SATELLITES, OR
FROM IALA BEACON SOURCES: TRIMBLE IS NOT RESPONSI BLE FOR
THE OPERATION OR FAILURE OF OPERATION OF ANY SATELLITE
BASED POSITIONING SYSTEM OR THE AVAI LABILITY OF ANY
SATELLITE BASED POSITIONING SIGNALS.

THE FOREGOING LIMITED WARRANTY TERMS STATE TRIMBL E’S ENTIRE
LIABILITY, AND YOUR EXCLUSIVE REMEDIES, REL ATING TO THE TRIMBLE
PRODUCT. EXCEPT AS OTHERWISE EXPRESSLY PROVIDED HEREIN, THE
PRODUCT, AND ACCOMPANYING DOCUMENTATION AND MATERIALS
ARE PROVIDED “AS-IS” AND WITHOUT EXPRESS OR IMPLIED WARRANTY
OF ANY KIND, BY EITHER TRIMBLE OR ANYONE WHO HAS BEEN
INVOLVED IN ITS CREATION, PRODUCTION, INSTALLATION, OR
DISTRIBUTION , INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, TITLE, AND NONINFRINGEMENT. THE ST ATED EXPRESS
WARRANTIES ARE IN LIEU OF ALL OBLIGATIONS OR LIABILITIES ON THE
PART OF TRIMBLE ARISING OUT OF, OR IN CONNECTION WITH, ANY
PRODUCT. BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON DURATION OR THE EXCLUSION OF AN IMPLIED
WARRANTY, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

Limitation of Liability

TRIMBLE'S ENTIRE LIABILITY UNDER ANY PROVISION HEREIN SHALL BE
LIMITED TO THE AMOUNT PAID BY YOU FOR THE PRODUCT. TO THE
MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT
SHALL TRIMBLE OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT,
SPECIAL , INCIDENTAL, OR CONSEQUENTIAL DAMAGE WHATSOEVER
UNDER ANY CIRCUMSTANCE OR LEGAL THEORY RELATI NG IN ANYWAY
TO THE PRODUCTS, SOFTWARE AND ACCOMPANYING DOCUMENTATION
AND MATERIALS, (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR
LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF DATA, OR
ANY OTHER PECUNIARY LOSS), REGARDL ESS OF WHETHER TRIMBLE HAS
BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH LOSS AND REGARDLES S
OF THE COURSE OF DEALING WHICH DEVELOPS OR HAS DEVELOPED
BETWEEN YOU AND TRIMBLE. BECAUSE SOME STATES AND
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE
LIMITATION MAY NOT APPLY TO YOU.

PLEASE NOTE: THE ABOVE TRIMBLE LIMITED WARRANTY PROVISIONS
WILL NOT APPLY TO PRODUCTS PURCHASED IN THOSE
JURISDICTIONS (E.G., MEMBER STATES OF THE EUROPEAN ECONOMIC

AREA) IN WHICH PRODUCT WARRANTIES ARE THE RESPON SIBILITY

OF THE LOCAL DEALER FROM WHOM THE PRODUCTS ARE ACQUIRED.
IN SUCH A CASE, PLEASE CONTACT YOUR TRIMBLE DEALER FOR
APPLICABLE WARRANTY INFORMATION.

Notice to Australian Purchasers

The Australian Consumer Law

Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund
for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.

Trimble's warranty, as set out in the user manual accompanying this
statement, or as described in the warranty card accompanying the
Product you purchased, is in addition to any mandatory rights and
remedies that you may have under the Australian Consumer Law.

Official Language

THE OFFICIAL LANGUAGE OF THESE TERMS AND CONDITIONS IS
ENGLISH. IN THE EVENT OF A CONFLICT BETWEEN ENGLISH AND OTHER
LANGUAGE VERSIONS, THE ENGLISH LANGUAGE SHALL CONTROL.

End User License Agreement for Product Software

IMPORTANT, READ CAREFULLY. THIS END USER LICENSE
AGREEMENT (“EULA”) IS A LEGAL AGREEMENT BETWEEN YOU
AND Trimble Navigation Limited (“Trimble”) and applies to the
computer software provided with th e Trimble product purchased by you
(whether built into hardware circuitry as firmware, embedded in flash
memory or a PCMCIA card, or stored on magnetic or other media), or
provided as a stand-alone computer software product, and includes any
accompanying written materials such as a user's guide or product

2 Juno Series Handhelds User Guide

manual, as well as any "online" or electronic documentation ("Software"
or “Product Software”). This EULA will also apply to any Software error
corrections, updates and upgrades subsequently furnished by Trimble,
unless such are accompanied by different license terms and conditions,
which will govern their use. You have acquired a Trimble Product
("Device") that includes Software, some of which was licensed by
Trimble from Microsoft Corporation or its affiliates (collectively
"Microsoft"). The Software licensed from Microsoft, as well as associated
updates, supplements, internet-based services and support services,
media, printed materials, and "online" or electronic documentation
("Microsoft Software"), are protected under this EULA. The Software is
also protected by copyright laws and international copyright treaties, as
well as other intellectual property laws and treaties. The Software is
licensed, not sold.

BY USING THE SOFTWARE, INCLUDING USE ON THIS DEVICE, YOU
ACCEPT THESE TERMS. IF YOU DO NOT ACCEPT THEM, DO NOT
USE THE DEVICE OR SOFT WARE. INSTE AD CONTACT TRIMBLE FOR
A REFUND OR CREDIT. As described below, using some features also
operates as your consent to the transmission of certain standard
computer information for Internet-based services.

WAR NI NG : If the Software contains voice operated technologies, then
operating this Software requires user attention. Diverting attention away
from the road while driving can possibly cause an accident or other
serious consequence. Even occasional, short diversions of attention can
be dangerous if your attention is diverted away from your driving task at
a critical time. Trimble and Microsoft make no representations,
warranties or other determinations that ANY use of this Software is
legal, safe, or in any manner recommended or intended while driving or
otherwise operating a motor vehicle.

This EULA does not grant you any rights with respect to the
Windows Mobile Device Center, Microsoft ActiveSync or Microsoft
Outlook 2007 Trial which are subject to the licenses accompanying
those items.

1 SOFTWARE PRODUCT LICENSE

1.1 License Grant. Subject to the terms and conditions of this EULA,
Trimble grants you a non-exclusive right to use one copy of the Software
in a machine-readable form only as installed on the Device. Such use is
limited to use with the Device for which it was intended, as set forth in
the product documentation. The Device Software is licensed with the
Device as a single integrated product. The Device Software installed in
read only memor y (“ROM”) of the Device may only be used as part of the
Device into which it was embedded. You may use the installation
Software from a computer solely to download the Software to one
Device. In no event shall the installation Software be used to download
the Software onto more than one Device. A license for the Software may
not be shared or used concurrently on different computers or Devices.

1.2 Scope of License. This EULA only gives you some rights to use the
Software. Trimble and Microsoft reserve all other rights. Unless
applicable law gives you more rights despite this limitation, you may use
the Software only as expressly permitted in this EULA. In doing so, you
must comply with any technical limitations in the Software that allow
you to use it only in certain ways. Except as expressly provided in this
EULA, rights to access the Software on this Device do not give you any
right to implement Microsoft patents or other Microsoft intellectual
property in software or devices that access this device. You may use
remote access technologies in the software such as Remote Desktop
Mobile to access the Software remotely from a computer or server. You
are responsible for obtaining any licenses required for use of the
protocols to access other software.

1.3 Proof of License. If you acquired the Software on the Device, or on a
disc or other media, a genuine Certificate of Authenticity label with a
genuine copy of the Software identifies licensed software. To be valid,
this label must be affixed to the Device, or included on or in the software
packaging. If you receive the label separately, it is not valid. You should
keep the label on the device or packaging to prove that you are licensed
to use the Software. To identify genuine Microsoft Software, see

http://www.howtotell.com.

1.4 Connectivity Software. Your Device package may include Windows
Mobile Device Center or Microsoft ActiveSync technology. If it is
included, then you may install and use it in accordance with the license
terms that are provided with it. If no license terms are provided, then
you may install and use only one (1) copy of the Software on a single
computer.

1.5 Digital Certificates. The Software uses digital certificates in X.509
format. These digital certificates are used for authentication.

1.6 Phone Functionality. If the Device Software includes phone
functionality, all or certain portions of the Device Software may be
inoperable if you do not have and maintain a service account with a
wireless telecommunication carrier (“Mobile Operator”), or if the Mobile
Operator’s network is not operating or configured to operate with the
Device.

1.7 Upgrade Software. In the event that any upgrades to the Software,
including Microsoft Software, are provided under this EULA, then the
following shall apply: you may follow the applicable instructions
accompanying this Software and install one (1) copy of the Software on
one (1) Device presently containing a licensed copy of a predecessor
version of the Software (unless this EULA indicates that this Software
copy has been licensed for installation on multiple Devices). NO
REPRESENTATION OR WARRANTY IS MADE BY TRIMBLE OR
MICROSOFT WITH RESPECT TO THE COMPATIBILITY OF THIS
SOFTWARE WITH ANY DEVICE OR ANY OTHER EXISTING
SOFTWARE OR DATA OF ANY KIND CONTAINED ON SUCH DEVICES,
AND NEITHER TRIMBLE OR MICROSOFT SHALL BE RESPONSIBLE
IN ANY REGARD WITH RESPECT TO ANY LOSS, CORRUPTION,
MODIFICATION OR INACCESSIBILITY OF ANY DATA,
APPLICATIONS OR OTHER SOFTWARE RESULTING FROM THE
INSTALLATION OF THE SOFTWARE ON ANY DEVICE.

1.8 Internet-Based Services Components. Microsoft provides Internet­based services with the software. Microsoft may change or cancel them
at any time. The Microsoft Software features described below connect to
Microsoft or service provider computer systems over the Internet. In
some cases, you will not receive a separate notice when they connect.
You may switch off some of these features or not use them. For more
information about these features, visit

http://go.microsoft.com/fwlink/?LinkId=81931. By using these

features, you consent to the transmission of this information.
Microsoft does not use the information to identify or contact you. You
may not use these services in any way that could harm them or impair
anyone else’s use of them. You may not use the services to try to gain
unauthorized access to any service, data, account or network by any
means.

1.9 Device Information. The following features use Internet protocols,
which send to the appropriate systems device information, such as your
Internet protocol address, the type of operating system, browser and
name and version of the Software you are using, and the language code
of the Device where you installed the Software. Microsoft uses this
information to make the Internet-based services available to you. a)
Update Features: Windows Mobile Update feature provides you the
ability to obtain and install Software updates on your Device if updates
are available. You may choose not to use this feature. Trimble and/or
your Mobile Operator may not support this feature or an update for your
device. b) Security Updates/Digital Rights Management. Content
owners use Windows Media digital rights management technology
(WMDRM) to protect their intellectual property, including copyrights.
This software and third party software use WMDRM to play and copy
WMDRM-protected content. If the software fails to protect the content,
content owners may ask Microsoft to revoke the software's ability to use
WMDRM to play or copy protected content. Revocation does not affect
other content. When you download licenses for protected content, you
agree that Microsoft may include a revocation list with the licenses.
Content owners may require you to upgrade WMDRM to access their
content. Microsoft software that includes WMDRM will ask for your
consent prior to the upgrade. If you decline an upgrade, you will not be
able to access content that requires the upgrade.

1.10 Additional Software/Services. The Device Software may permit
Trimble, Microsoft, their affiliates and/or their designated agent to
provide or make available to you Software updates, supplements, add-on
components, or Internet-based services components of the Software
after the date you obtain your initial copy of the Software
(“Supplemental Components”).

1.10.1 If Trimble provides or makes available to you Supplemental
Components and no other end user license agreement terms are
provided along with the Supplemental Components, then the terms
of this EULA shall apply.

1.10.2 If Microsoft, its affiliates and/or its designated agent makes
available Supplemental Components, and no other end user license
agreement terms are provided, then the terms of this EULA shall
apply, except that the Microsoft entity or affiliate entity providing
the Supplemental Component(s) shall be the licensor of the
Supplemental Component(s).

1.10.3 Trimble, Microsoft and each of their affiliates and/or their
designated agents reserve the right to discontinue any Internet­based services provided to you or made available to you through
the use of the Device Software.

1.11 Links to Third Party Sites. If the Software provides links to third
party websites, those links are provided to you only as a convenience,
and the inclusion of any link does not imply an endorsement of the third
party website by Microsoft or Trimble.

1.12 Other Rights and Limitations. (1) The Software contains valuable
trade secrets proprietary to Trimble and its suppliers. To the extent
permitted by relevant law, you shall not, nor allow any third party to
copy, decompile, disassemble or otherwise reverse engineer the
Software, or attempt to do so, provided, however, that to the extent any
applicable mandatory laws (such as, for example, national laws
implementing EC Directive 91/250 on the Legal Protection of Computer

Juno Series Handhelds User Guide 3

Programs) give you the right to perform any of the aforementioned
activities without Trimble's consent in order to gain certain information
about the Software for purposes specified in the respective statutes (i.e.,
interoperability), you hereby agree that, before exercising any such
rights, you shall first request such information from Trimble in writing
detailing the purpose for which you need the information. Only if and
after Trimble, at its sole discretion, partly or completely denies your
request, may you exercise such statutory rights. (2) This Software is
licensed as a single product. You may not separate its component parts
for use on more than one computer nor make more copies of the
software than specified in this EULA. (3) You may not rent, lease, or lend
the Software. (4) No service bureau work, multiple-user license or time­sharing arrangement is permitted. For purposes of this EULA “service
bureau work” shall be deemed to include, without limitation, use of the
Software to process or to generate output data for the benefit of, or for
purposes of rendering services to any third party over the Internet or
other communications network. (5) You may make one backup copy of
the Software. You may use it only to reinstall the Software on the Device.
(6) You may transfer the Software only with the Device, the Certificate of
Authenticity label, and these license terms directly to a third party.
Before the transfer, that party must agree that these license terms apply
to the transfer and use of the Software. You may not retain any copies of
the Software including the backup copy. (7) The Software is subject to
United States export laws and regulations. You must comply with all
domestic and international expor t laws and regulations that apply to the
Software. These laws include restrictions on destinations, end users, and
end use. For additional information see

http://www.microsoft.com/exporting. (8) Without prejudice as to any

other rights, Trimble may terminate this EULA without notice if you fail
to comply with the terms and conditions of this EULA. In such event,
you must destroy all copies of the Software and all of its component
parts. (9) If the Microsoft Software includes speech recognition
component(s), you should understand that speech recognition is an
inherently statistical process and that recognition errors are inherent in
the process. Neither Trimble, Microsoft, nor any of their suppliers shall
be liable for any damages arising out of errors in the speech recognition
process. (10) You may not publish the Software for others to copy. (11)
You may not use the Software for commercial software hosting services.

1.13 Notice Regarding the MPEG-4 Visual Standard. The Software may
include MPEG-4 visual decoding technology. This technology is a format
for data compression of video information. MPEG LA, L.L.C. requires
this notice: USE OF THIS PRODUCT IN ANY MANNER THAT
COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED,
EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR
INFORMATION (i) GENERATED BY AND OBTAINED WITHOUT
CHARGE FROM A CONSUMER NOT THEREBY ENGAGED IN A
BUSINESS ENTERPRISE, AND (ii) FOR PERSONAL USE ONLY; AND (B)
OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG
LA, L.L.C. If you have questions about the MPEG-4 visual standard,
please contact MPEG LA, L.L.C., 250 Steele Street, Suite 300, Denver, CO
80206; www.mpegla.com.

1.14 If the Device Software is provided by Trimble separate from the
Device on media such as a ROM chip, CD ROM disk(s) or via web
download or other means, and is labeled “For Upgrade Purposes Only”
you may install one (1) copy of such Device Software onto the Device as
a replacement copy for the existing Device Software and use it
accordance with this EULA, including any additional end user license
agreement terms accompanying the upgrade Device Software.

1.15 If any software component(s) is provided by Trimble separate from
the Device on CD ROM disc(s) or via web download or other means, and
labeled “For Upgrade Purposes Only,” you may (i) install and use one (1)
copy of such component(s) on the computer(s) you use to exchange data
with the Device as a replacement copy for the existing Companion CD
com pone nt(s).

1.16 Copyright. All title and copyrights in and to the Software (including
but not limited to any images, photographs, animations, video, audio,
music, text and “applets,” incorporated into the Software), the
accompanying printed materials, and any copies of the Software are
owned by Trimble, or Microsoft (including Microsoft Corporation), and
their respective suppliers. You may not copy the printed materials
accompanying the Software. All title and intellectual property rights in
and to the content which may be accessed through use of the S oftware is
the property of the respective content owner and may be protected by
applicable copyright or other intellectual property laws and treaties.
This EULA grants you no rights to use such content. You shall not
remove, cover or alter any of Trimble’s patent, copyright or trademark
notices placed upon, embedded in or displayed by the Software or on its
packaging and related materials. All rights not specifically granted in
this EULA are reserved by Trimble, Microsoft, and their respective
suppliers.

1.17 U.S. Government Restricted Rights. The Software is provided with
“RESTRICTED RIGHTS”. Use, duplication, or disclosure by the United
States Government is subject to restrictions as set forth in this EULA,

and as provided in DFARS 227.7202-1(a) and 227.7202-3(a) (1995),
DFARS 252.227-7013(c)(1)(ii) (OCT 1988), FAR 12.212(a) (1995), FAR

52.227-19, or FAR 52.227-14(ALT III), as applicable.

1.18 Microsoft has contractually obligated Trimble to include the
following terms in this EULA:

Product Support. The Product support for the Software is not
provided by Microsoft or its affiliates or subsidiaries. For product
support, please refer to the Trimble support number provided in the
documentation for the Device.

Not fault tolerant. The Software is not fault tolerant. Trimble
installed the Software on the Device and is responsible for how it
operates on the Device.

Restricted user. The Microsoft Software was designed for systems
that do not require fail-safe performance. You may not use the
Microsoft Software in any device or system in which a malfunction
of the Microsoft Software would result in foreseeable risk of injury
or death to any person. This includes operation of nuclear facilities,
aircraft navigation or communication systems and air traffic
control.

No warranties for the software. Microsoft gives no express
warranties, guarantees or conditions regarding the Microsoft
Software. Any warranties you receive regarding the Device or the
Software do not originate from, and are not binding on, Microsoft or
its affiliates. When allowed by your local laws, Trimble and
Microsoft exclude implied warranties of merchantability, fitness for
a particular purpose and non-infringement.

LIABILITY LIMITATIONS. You can recover from Microsoft and its
affiliates only direct damages up to fifty U.S. Dollars (U.S. $50.00), or
equivalent in local currency. You cannot recover any other damages,
including consequential, lost profits, special, indirect or incidental
damages. This limitation applies to:

– Anything related to the Software, services, content

(including code) on third party internet sites, or third party
programs, and

– claims for breach of contract, breach of warranty, guarantee

ondition, strict liability, negligence, or other tort to the

or c
extent permitted by applicable law.

It also applies even if Microsoft should have been aware of the
possibility of the damages. The above limitation may not apply to
you because your country may not allow the exclusion or limitation
of incidental, consequential or other damages.

2 LIMITED WARRANTY FOR TRIMBLE PRODUCT SOFTWARE.

2.1 Limited Warranty. Trimble warrants that the Software, exclusive of
the Microsoft Software, will perform substantially in accordance with
the accompanying written materials for a period of twelve (12) months
from the date of purchase. This limited warranty gives you specific legal
rights; you may have others, which vary from state/jurisdiction to
state/jurisdiction. The above limited warranty does not apply to Fixes,
Minor Updates, or Major Upgrades of the Software after expiration of the
twelve (12) month limited warranty period, all of which are provided “AS
IS” and without warranty unless otherwise specified in writing by
Trimble. Because the Software is inherently complex and may not be
completely free of nonconformities, defects or errors, you are advised to
verify your work. Trimble does not warrant that the Software will
operate error free or uninterrupted, will meet your needs or
expectations, or that all nonconformities can or will be corrected.

2.2 Software Fixes. During the limited warranty period described in
section 2.1 above, you will be entitled to receive such Fixes to the
Product Software that Trimble releases and makes commercially
available and for which it does not charge separately, subject to the
procedures for delivery to purchasers of Trimble products generally. If
you have purchased the Product from an authorized Trimble dealer
rather than from Trimble directly, Trimble may, at its option, forward the
software Fix to the Trimble dealer for final distribution to you. Minor
Updates, Major Upgrades, new products, or substantially new software
releases, as identified by Trimble, are expressly excluded from this
update process and limited warranty. Receipt of Software Fixes or other
enhancements shall not serve to extend the limited warranty period.

For purposes of this warranty the following definitions shall apply: (1)
"Fix(es)" means an error correction or other update created to fix a
previous software version that does not substantially conform to its
Trimble specifications; (2) "Minor Update" occurs when enhancements
are made to current features in a software program; and (3) "Major
Upgrade" occurs when significant new features are added to software, or
when a new product containing new features replaces the further
development of a current product line. Trimble reserves the right to
determine, in its sole discretion, what constitutes a Fix, Minor Update,
or Major Upgrade.

2.3 Customer Remedies. Trimble’s and its suppliers’ entire liability, and
your sole remedy, with respect to the Software shall be either, at
Trimble’s option, (a) repair or replacement of the Software, or (b) return
of the license fee paid for any Software that does not meet Trimble’s

4 Juno Series Handhelds User Guide

limited warranty. This limited warranty is void if failure of the Software
has resulted from (1) accident, misuse, abuse, or misapplication; (2)
alteration or modification of the Software without Trimble’s
authorization; (3) interaction with software or hardware not supplied or
supported by Trimble; (4) your improper, inadequate or unauthorized
installation, maintenance or storage; or (5) if you violate the terms of
this EULA. Any replacement Software will be warranted for the
remainder of the original warranty period or thirty (30) days, whichever
is longer.

2.4 NO OTHER WARRANTIES. TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW, TRIMBLE AND ITS SUPPLIERS
DISCLAIM ALL OTHER WARRANTIES, TERMS AND CONDITIONS,
EITHER EXPRESS OR IMPLIED, BY STATUTE, COMMON LAW OR
OTHERWISE, INCLUDING BUT NOT LIMITED TO, IMPLIED
WARRANTIES, TERMS AND CONDITIONS OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND
NONINFRINGEMENT WITH REGARD TO THE SOFTWARE, ITS
SATISFACTORY QUALITY AND THE PROVISION OF OR FAILURE TO
PROVIDE SUPPORT SERVICES. TO THE EXTENT ALLOWED BY
APPLICABLE LAW, IMPLIED WARRANTIES, TERMS AND
CONDITIONS ON THE SOFTWARE ARE LIMITED TO NINETY (90)
DAYS. Y0U MAY HAVE OTHER LEGAL RIGHTS WHICH VARY FROM
STATE/JURISDICTION TO STATE/JURISDICTION.

NO WARRANTIES FOR THE MICROSOFT SOFTWARE. THE
MICROSOFT SOFTWARE is provided “AS IS” and with all faults, AND
TRIMBLE PROVIDES NO WARRANTY WITH RESPECT THERETO.
THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE,
ACCURACY AND EFFORT (INCLUDING LACK OF NEGLIGENCE) FOR
THE MICROSOFT SOFTWARE IS WITH YOU. ALSO, THERE IS NO
WARRANTY AGAINST INTERFERENCE WITH YOUR ENJOYMENT OF
THE MICROSOFT SOFTWARE OR AGAINST INFRINGEMENT.

2.5 PLEASE NOTE: THE FOREGOING TRIMBLE LIMITED WARRANTY
PROVISIONS MAY NOT APPLY TO SOFTWARE PRODUCT LICENSES
PURCHASED IN THOSE JURISDICTIONS (SUCH AS COUNTRIES OF THE
EUROPEAN UNION) IN WHICH PRODUCT WARRANTIES ARE OBTAINED
FROM THE LOCAL DISTRIBUTOR. IN SUCH CASES, PLEASE CONTACT
YOUR TRIM BLE DEALER FOR APP LICABLE WARRANTY IN FORMATION.

3 TRIMBLE LIMITATION OF LIABILITY.

3.1 LIMITATION OF LIABILITY. TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL TRIMBLE
OR ITS SUPPLIERS BE LIABLE FOR ANY SPECIAL, INCIDENTAL,
INDIRECT, CONSEQUENTIAL OR PUNITIVE DAMAGES HOWEVER
CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY
(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF
THE USE OR INABILITY TO USE THE SOFTWARE, OR THE
PROVISION OF OR FAILURE TO PROVIDE SUPPORT SERVICES, EVEN
IF TRIMBLE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES AND NOTWITHSTANDING ANY FAILURE OF ESSENTIAL
PURPOSE OF ANY EXCLUSIVE REMEDY PROVIDED IN THIS EULA.

IN NO EVENT SHALL THE TOTAL CUMULATIVE LIABILITY OF
TRIMBLE AND ITS SUPPLIERS IN CONNECTION WITH THIS EULA
OR THE SOFTWARE, WHETHER BASED ON CONTRAC T, WARRANTY,
TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY OR
OTHERWISE, EXCEED THE ACTUAL AMOUNT PAID TO TRIMBLE
FOR THE SOFTWARE LICENSE GIVING RISE TO THE CLAIM.
BECAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL
OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT
APPLY TO YOU.

4 GENERAL.

4.1 This EULA shall be governed by the laws of the State of California
and applicable United States Federal law without reference to “conflict of
laws” principles or provisions. The United Nations Convention on
Contracts for the International Sale of Goods will not apply to this
EULA. Jurisdiction and venue of any dispute or court action arising from
or related to this EULA or the Software shall lie exclusively in or be
transferred to the courts the County of Santa Clara, California, and/or
the United States District Court for the Northern District of California.
You hereby consent and agree not to contest, such jurisdiction, venue
and governing law.

4.2 Section 4.1 notwithstanding, if you acquired this product in Canada,
this EULA is governed by the laws of the Province of Ontario, Canada. In
such case each of the parties to this EULA irrevocably attorns to the
jurisdiction of the courts of the Province of Ontario and further agrees to
commence any litigation that may arise under this EULA in the courts
located in the Judicial District of York, Province of Ontario. If you
acquired this product in the European Union, this EULA is governed by
the laws of The Netherlands, excluding its rules governing conflicts of
laws and excluding the United Nations Convention on the International
Sale of Goods. In such case each of the parties to this EULA irrevocably

attorns to the jurisdiction of the courts of The Netherlands and further
agrees to commence any litigation that may arise under this EULA in the
courts of The Hague, The Netherlands.

4.3 Trimble reserves all rights not expressly granted by this EULA.

4.4 Official Language. The official language of this EULA and of any
documents relating thereto is English. For purposes of interpretation, or
in the event of a conflict between English and versions of this EULA or
related documents in any other language, the English language version
shall be controlling.

Registration

To receive information regarding updates and new products, please
contact your local dealer or visit the Trimble website at

www.trimble.com/register. Upon registration you may select the

newsletter, upgrade, or new product information you desire.

Notices

Class B statement- Notice to users This equipment has been tested and
found to comply with the limits for a Class B digital device pursuant to
Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2)
this device must ac cept any interference received, including inte rference
that may cause undesired operation.

This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions may
cause harmful interference to radio communication.

However, there is no guarantee that interference will not occur in a

ticular installation. If this equipment does cause harmful

par
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and the receiver.
– Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.
Changes and modifications not expressly approved by the manufacturer

o

r registrant of this equipment can void your authority to operate this

equipment under Federal Communications Commission rules.
The radio devices used by this equipment are classified under 47 CFR

§15.247 as spread spectrum transmitter equipment. In accordance with
OET Bulletin 65 supplement C Edition 1-01, the device operates at low
power levels where there is a high likelihood of compliance with the RF
exposure standards, is categorically excluded from routine
environmental evaluation as set forth in CFR 47 section 2.1093. The
radiated output power of this equipment produces a calculated SAR that
is significantly below the FCC radio frequency exposure limits.

Equipment that is additionally fitted with a wireless cellular modem is
certified to satisfy US requirements as stipulated in 47 CFR Parts 22 and

24.
The external antenna connector provided in this device is for GPS

antennas only.

aGPS and emergency calls (Juno 3D handheld only)

When you make an emergency call, your phone can use assisted Global

ositioning System (aGPS) satellite signals to tell the emergency

P
response center your approximate location.

The aGPS functionality may be limited, so:
– Always tell the emergency response center your best knowledge of

your location.

– Remain on the phone for as long as the emergency response center

instructs you.

– aGPS might not work for emergency calls if your local emergency

response center does not process aGPS location information. For

details, contact your local authorities.
aGPS performance
For b est results :
– Go outside and away from underground locations, covered vehicles,

structures with metal or concrete roofs, tall buildings, and tree cover.

Indoor performance might improve if you move closer to

unobstructed windows.
– Move away from electronic devices that might interfere with or block

aGPS satellite signals, for example radios and entertainment

equipment.
If your phone cannot find strong aGPS satellite signals, the location of

the nearest cell tower in contact with your phone is automatically
provided to the emergency response center.

aGPS technology
This mobile device incorporates aGPS technology in order to comply

with emergency caller location requirements. aGPS technology also can
be used in other applications to track and monitor a user's location-for

5 Juno Series Handhelds User Guide

example, to provide location specific data. Users who do not want such
tracking and monitoring should avoid using such applications. aGPS
uses your wireless service provider's network and therefore airtime, data
charges, and/or additional charges may apply in accordance with your
service plan. Contact your wireless service provider for details.

Note - this service is not provided by all networks. Please contact your
cellular service provider if you wish to confirm that this service is provided.

Canada

This Class B digital apparatus complies with Canadian ICES-003.
This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus as set out in the radio interference
regulations of the Canadian Department of Communications.

Cet appareil numérique de la classe B est conforme à la norme NNB-003
du Canada.

Le présent appareil numérique n'émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de Classe B
prescrites dans le règlement sur le brouillage radioélectrique édicté par
le Ministère des Communications du Canada.

Europe

This product has been tested and found
to comply with all requirements for CE
Marking and sale within the European
Economic Area (EEA). It is classified and
marked as being Class 2 Radio Equipment under 2000/299/EC, as
Bluetooth and Wi-Fi approvals are country specific. Please consult your
local distributor for more information.

The Juno series handheld has Bluetooth and Wi-Fi approval in most EU

ntries, and the Juno SC and Juno SD are also compliant with GSM

cou
and UMTS conformity assessment requirements specified by the
European Council Directive, Radio and Telecommunication Terminal
Equipment 1999/5/EC. These requirements provide reasonable
protection against harmful inter ference when the equipment is operated
appropriately in a residential or commercial environment.

Australia and New Zealand

This product conforms with the regulatory requirements of the
Australian Communications and Media Authority (ACMA) EMC
a

nd Radiocommunications framework, thus satisfying the
requirements for C-Tick Marking and sale within Australia and
New Zealand.

Equipment that is additionally fitted with a wireless cellular
modem satisfies the requirements for A-Tick Marking and sale
in Australia and New Zealand. The A-Tick Marking is an
indication to the user that the product is suitable for connection
to a telecommunications network operated by a carrier or carriage
service provider.

Taiwan – Battery Recycling Requirements

The product contains an internal Lithium-ion battery.
Taiwanese regulations require that waste batteries are recycled.

廢電池請回收

Notice to Our European Union Customers

For product recycling instructions and more information, please go to

www.trimble.com/ev.shtml.

Recycling in Europe: To recycle Trimble WEEE (Waste Electrical
and Electronic Equipment, products that run on electrical
power.), Call [phone], and ask for the "WEEE Associate".
Or, mail a request for recycling instructions to:
Tri mble E urop e BV
c/o Menlo Worldwide Logistics
Meerheide 45
5521 DZ Eersel, NL

Juno Series Handhelds User Guide 6

Safety information

The Trimble® Juno® series handhelds contain a Bluetooth® radio and a Wi-Fi radio.
The Juno 3D handheld also contains a cellular modem. In some situations, you may be
required to turn off the radios. For example, aviation authority regulations restrict the
use of radios on board aircraft.

Turning off the integrated radios

To prevent the handheld from emitting radio signals, do one of the following:

• To turn off the handheld, press and hold the
menu, then tap Shutdown.

• To turn off the Bluetooth, Wi-Fi, and cellular modem radios:

a. Tap the title bar on the Ho

list, tap the or icon.

b. In the C

c. Tap

and Phone buttons change to Off.

onnectivity or the Phone dialog, select Wireless Manager.

All to turn off all radios. The status fields below the Wi-Fi, Bluetooth,

me or Start screen, and then on the pull-down

Power button to display the Power

Deactivating the integrated radios

The Juno series handheld is shipped with Wi-Fi and Bluetooth wireless technology
activated. You may need to deactivate the Wi-Fi and/or Bluetooth radio in the
handheld if the country in which you are working does not approve the use of Wi-Fi
and/or Bluetooth wireless technology. If you are unsure about whether the Juno series
handheld’s radios are approved for use in your country, check with your Trimble
reseller.

Use the Radio Activation Manager software to deactivate the integrated Wi-Fi and/or
Bl

uetooth radio, or to reactivate the radios if they have been deactivated. The Radio

Activation Manager software runs on an office computer.

The latest copy of the software is available for download from the Trimble website. Go
to www.trimble.com/support.shtml, cl
Juno 3D), click Downloads, click Juno Serie

ick the link for your receiver type, (Juno 3B or

s and then click Radio Activation Manager.

Exposure to radio frequency radiation from Bluetooth and Wi-Fi transmitters

This device is approved as a portable device with respect to Radio Frequency (RF)
exposure compliance. The radiated output power of the internal wireless radio
transmitters is less than 10 milliWatt, which results in exposure levels far below the
FCC radio frequency exposure limits, even when operated in close proximity to the
body. The internal wireless radios operate within guidelines found in international
radio frequency safety standards and recommendations, which reflect the consensus
of the international scientific community. Trimble therefore believes the internal

Juno Series Handhelds User Guide 7

wireless radios are safe for use by users. The level of electromagnetic energy emitted is
hundreds of times lower than the electromagnetic energy emitted by wireless devices
such as mobile phones. However, the use of wireless radios may be restricted in some
situations or environments, such as on aircraft. If you are unsure of restrictions, you are
encouraged to ask for authorization before turning on the wireless radios.

Exposure to radio frequency radiation from cellular wireless transmitters

Juno series handheld equipment uses cellular wireless radios that have been designed
and manufactured to meet safety requirements for limiting exposure to radio waves.
When used in accordance with the instructions set forth in this manual, the
equipment has been independently verified to not exceed the emission limits for safe
exposure to radio frequency (RF) energy as specified by the Federal Communications
Commission of the U.S. Government in 47 CFR §2.1093.

These limits are part of comprehensive guidelines and establish permitted levels of RF
en

ergy for the general population. The guidelines are based on standards that were
developed by independent scientific organization through periodic and thorough
evaluation of scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of age and health.

The exposure standard for all wireless devices employs a unit of measurement known
a

s the Specific Absorption Rate, or SAR; the SAR limit set by the FCC

1

is 1.6W/kg.

Tests for SAR on the Juno series handhelds have been undertaken using the standard

erating positions adopted by the FCC that test the device for SAR while it is

op
transmitting at the highest certified power level in all tested frequency bands.

The FCC has granted an Equipment Authorization for this device on the basis that all

eported SAR levels have been evaluated to be compliant with the FCC RF exposure

r
guidelines.

SAR information on this device is on file with the FCC and can be found under the
D

isplay Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID:

JUP96410 (model TNJ31) or JUP96420 (phone model TNJ32).

For documentation relating to the SAR values of the Juno series handhelds, go to the
T

rimble Support website at www.trimble.com/support.shtml, select the required Juno
series handheld ( Juno 3B or Juno 3D), select the Technical Support tab, and then click
C

ompliance Information.

1.

In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg

(W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety .

8 Juno Series Handhelds User Guide

AC adaptor safety

To charge the handheld’s battery, use the international adaptor kit provided with the
Juno series handheld (see Powering the handheld, page 16).

C

WARNING – To use AC adaptors safely:

– Use only the AC adaptor intended for the Juno series handheld. Using any other AC
adaptor can damage the handheld and may vo
adaptor with any other product.
– Make certain that the input voltage on the adapt
in your location.
– Make certain that the adaptor has pro
– Do not use the AC adaptor in wet outdoor areas;
– Unplug the AC adaptor from powe
– Do not short the output connector.
– Be aware that there are no user-serviceable parts in this product.
– If the AC adaptor becomes damaged, replace it with a new Trimble AC adaptor..

Battery safety

The rechargeable Lithium-ion battery is supplied partially charged. Charge the battery
completely before using it for the first time (see Powering the handheld, page 16). If the
battery has been stored for longer than s

C

C

WARNING – Use only the battery intended for the Juno series handheld. Using any other

battery can damage the handheld and may void your warranty. If the battery becomes
damaged or stops charging fully, replace it with a new battery.

WARNING – Do not damage the rechargeable Lithium-ion battery. A damaged battery

can cause an explosion or fire, and can result in personal injury and/or property damage.
To prevent injury or damage:
– Do not use or charge the battery if it appears to be damaged. Signs of damage include,
but are not limited to, discoloration,
– Do not store or leave your device near a heat source such as near a fireplace or other
heat-generating applianc
(158 °F) such as on a vehicle dashboard. When
cells could explode or vent, posing a risk of fire.
– Do not immerse the battery in water.
– Do not use or store the battery insid
– Do not drop or puncture the battery.
– Do not open the battery or short-circuit its contacts.

id your warranty. Do not use the AC

or matches the voltage and frequency

ngs compatible with your outlets.

it is designed for indoor use only.

r when not in use.

ix months, charge it before use.

warping, and leaking battery fluid.

e, or otherwise expose it to temperatures in excess of 70 °C

heated to excessive temperatures, battery

e a vehicle during hot weather.

C

WARNING – Avoid contact with the rechargeable Lithium-ion battery if it appears to be

leaking. Battery fluid is corrosive, and contact with it can result in personal injury and/or
property damage.
To prevent injury or damage:
– If the battery leaks, avoid cont
– If battery fluid gets into your eyes, immediately rinse your eyes with clean water and
seek medical attention. Do not rub your eyes!
– If battery fluid gets onto your skin or clothi
the battery fluid.

act with the battery fluid.

ng, immediately use clean water to wash off

Juno Series Handhelds User Guide 9

C

WARNING – Charge and use the rechargeable Lithium-ion battery only in strict

accordance with the instructions. Charging or using the battery in unauthorized
equipment can cause an explosion or fire, and can result in personal injury and/or
equipment damage.
To prevent injury or damage:
– Do not charge or use the battery if it appears to be damaged or leaking.
– Charge the Lithium-ion battery only in a Trimbl
Be sure to follow all instructions that are provided with the battery charger.
– Discontinue charging a battery that gives of
– Use the battery only in Trimble equipment that is specified to use it.
– Use the battery only for its intended use and according to
documentation.

Note – Many administrations have regulations relating to the recycling or safe disposal of
batteries. Please consult http://www.trimble.com/about_ev.shtml for more information.

Memory card use

The Juno series handheld provides a memory card slot, providing an alternative
storage location to the storage memory in the handheld.

e product that is specified to charge it.

f extreme heat or a burning odor.

the instructions in the product

C

C

WARNING – Static electricity can harm electronic components inside your handheld. To

prevent static damage:
– Discharge static electricity from your body before you touch any of the electronic
components inside your device, such as a memory module. You can do so by touching an
unpainted metal surface.

WARNING – The presence of any dust or moisture in the memory card slot may adversely

affect the device and void your Trimble warranty. To prevent dust or moisture entering
the memory card slot:
– When inserting or removing a memory card, plac
surface.

External GPS antenna use

The Juno series handheld provides an external GPS antenna port. This port is for GPS
antennas only.

C

WARNING – The presence of any dust or moisture in the external antenna port may cause

the external antenna to not work. To prevent dust or moisture entering the external
antenna slot, take care when using the handheld with an external antenna in wet or
dusty conditions.

e the handheld on a dust-free indoor

10 Juno Series Handhelds User Guide

About the Juno series handhelds

The Juno series handhelds includes the Juno 3B
and 3D handhelds. These rugged handhelds are

ated IP54, and combine a high sensitivity GNSS

r
receiver with the Windows

6.5 Professional operating system.

The Juno series handhelds have built-in Bluetooth
wireless technology for cable-free connection to
other devices, Wi-Fi connectivity for connections
to networks, and an integrated 5MP camera with
autofocus and flash.

The Juno 3D handheld also has an integrated
c

ellular modem for downloading and transmitting
data, with support for voice calls and text
messaging.

The integrated GNSS receiver provides accurate
p

ositioning information within 3 meters when
using postprocessed or 5 meters with real-time differential corrections.
information, see Using the GNSS receiver, page 72.

®

Embedded Handheld

®

For more

About this user guide

The Juno Series Handhelds User Guide describes how to set up and use the Juno series
handheld. The information in this guide supplements the information in the Juno
Series Quick Start Guide, which you received with the handheld.

This guide describes how to:

• get started with the Juno series handheld.

• use the Windows Embedded Handheld 6.5 Professional operating system.

• use the cellular modem in the Juno 3D handheld.

• synchronize information between a computer and the handheld.

• exchange information between the handheld and other devices.

• connect to the Internet or to a computer network.

• use the handheld’s integrated GNSS receiver.

• use the handheld’s integrated camera.

Even if you have used other Global Navigation Satellite System (GNSS) or Global
P

ositioning System (GPS) products before, Trimble recommends that you spend some
time reading this guide to learn about the special features of the product.

Juno Series Handhelds User Guide 11

Collecting GNSS data

Quick Start Guide

Battery

Juno series handheld

Universal power

supply

Stylus

Stylus tether

Wrist
lanyad

Mini USB cable

To collect GNSS data with the Juno series handheld, you must install GNSS field
software onto the handheld.

You can use the Juno series handheld with compatible Mapping and GIS field and
o

ffice software. For version numbers and a complete list, see the Product Compatibility

List on www.trimble.com.

For more information on using the integrated GNSS receiver, see Using the GNSS

receiver, page 72.

What’s in the box?

When you unpack the Juno series handheld, check that you have received all the
components:

Inspect all contents for visible damage (scratches, dents) and if any components

pear damaged, notify the shipping carrier. Keep the shipping and packaging material

ap
for the carrier’s inspection.

12 Juno Series Handhelds User Guide

Accessories

The following optional accessories are available:

• Vehi cle p ower ada p tor

• Carry case with belt clip

• External patch antenna

• Screen protectors (2 pack)

anti-glare or ultra-clear

• Vehi cle m ount

• Pole mount

For more information, go to:

• www.trimble.com/mappingGIS/juno3B.aspx

• www.trimble.com/mappingGIS/juno3D.aspx

Use and care of the handheld

When using the handheld:

• Protect the touch screen by using your finger or the stylus provided, and avoid

using excessive pressure and sharp or abrasive objects. To protect the touch
screen from pressure and abrasive objects, Trimble recommends that you apply
a screen protector.

• Replacement stylus (2 pack)

• Replacement International AC

adaptor

• Replacement battery

• External battery charger

• Replacement wrist strap

• Keep the outer surface free of dirt and dust.

• Ensure that protective covers are appropriately fitted to the external antenna

port, USB and power connectors, so that they are kept free from dirt, dust, fluid
ingress, and electrostatic discharge.

• Protect the handheld from extreme temperatures. For example, do not leave the

handheld on the dashboard of a vehicle.

• The handheld is rated IP54, but is not waterproof. Do not immerse the handheld

in water, and be careful not to drop the handheld or subject it to any strong
impact.

To clean the handheld, wipe it with a clean dry cloth.

Storage

If you are not going to use the handheld for three months or more, Trimble
recommends that you do not leave the handheld in Suspend mode (see pag
Instead, partially charge the battery and then turn off the handheld.

e 21).

Juno Series Handhelds User Guide 13

To prepare the Juno series handheld for storage:

1. Transfer any data that you need to an office computer.

2. Charge the battery to approximately 30%.

3. Press and hold the

Power button to display the Power menu, then tap

Shutdown.

4. Store the handheld at room temperature.

To use the Juno series handheld after storage:

1. Press the

Power key to turn on the handheld.

2. Recharge the battery (see Charging the battery, page 18).

Technical assistance

Go to the Juno series handheld technical support page on the Trimble website

(www.trimble.com/mappingGIS/juno3d.aspx or
(www.trimble.com/mappingGIS/juno3b.aspx for the latest support information,

including:

• FAQs

• support notes detailing support issues

• documentation

• the latest files available for download

Additional help

If you still cannot find the information that you need, contact your Trimble reseller.

Windows error reporting

If for any reason a Microsoft Windows Error Reporting dialog appears, indicating that
th

e handheld or Trimble field software has encountered a problem and needs to close,

you are prompted to send an error report to Microsoft.

Trimble recommends that you click

Send and then click any subsequent links that are

used to obtain additional information.

Trimble can access the report that is sent to Microsoft and use it to improve the Juno

es handheld handheld.

seri

14 Juno Series Handhelds User Guide

Getting started

Start

Camera button

Soft keys

Power button

External GPS
antenna port

Earpiece

(LED surround)

Reset button

Microphone

This section describes the main features of the Juno series handheld, and provides the
information you need to get up and running with the handheld.

Parts of the Juno series handheld

The following pages show the main parts of the handheld.

B

Figure 1.1 Juno series handheld – Juno 3B and Juno 3D - front view

The function of each key is described below:

Key Description

Start Press to display the Windows Emb

screen.

Camera Press to start the Camera

Soft keys By default these keys perfor

Tip – To lock the screen and handheld keys without turning off the handheld, use the
device lock option (see Device lock, page 35).

page 78).

right softkeys in the menu bar.
Alternatively, program these keys

action. To program the keys, use the Buttons control (see

Buttons, page 32).

application (see Using the camera,

edded Handheld Start

m the same action as the left and

to perform a selected

Juno Series Handhelds User Guide 15

Figure 1.2 Juno series handheld – bottom view

Mini USB socket

Stylus and wrist

Stylus

Power connector

lanyard tether

Camera lens

Camera flash
(Juno 3D only)

Back cover lock

Speaker

Figure 1.3 Juno series handheld - back view

Powering the handheld

The Juno series handheld contains a rechargeable Lithium-ion battery.

Note – C
battery has been stored for longer than six months, charge it before use. Trimble
recommends charging the battery for four hours to recharge it fully.

Note – Cold
using the cellular modem consumes additional battery power and so shortens battery life
between charges.

16 Juno Series Handhelds User Guide

harge the battery completely before using the handheld for the first time. If the

temperatures, or using Bluetooth wireless technology or Wi-Fi connectivity, or

AC adaptor safety

C

C

WARNING – To use AC adaptors safely:

– Use only the AC adaptor intende
other AC adaptor can damage the handheld and may void your warranty. Do not use
the AC adaptor with any other product.
– Make certain that the input voltage on the adapt
in your location.
– Make certain that the adaptor has prongs compatible with your outlets.
– Do not use the AC adaptor in wet outdoor areas;
– Unplug the AC adaptor from power when not in use.
– Do not short the output connector.
– Be aware that there are no user-serviceable parts in this product.
– If the AC adaptor becomes damaged, replace it with a new Trimble AC adaptor.

d for the Juno series handheld handheld. Using any

or matches the voltage and frequency

it is designed for indoor use only.

Battery safety

WARNING – Do not damage the rechargeable Lithium-ion battery. A damaged battery

can cause an explosion or fire, and can result in personal injury and/or property damage.
To prevent injury or damage:
– Do not use or charge the battery if it appears to be damaged. Signs of damage include,
but are not limited to, discoloration,
– Do not store or leave your device near a heat source such as near a fireplace or other
heat-generating appliance, or otherwise expose it to temperatures in excess of 70 °C
(158 °F) such as on a vehicle dashboard. When
cells could explode or vent, posing a risk of fire.
– Do not immerse the battery in water.
– Do not use or store the battery insid
– Do not drop or puncture the battery.
– Do not open the battery or short-circuit its contacts.

warping, and leaking battery fluid.

heated to excessive temperatures, battery

e a vehicle during hot weather.

C

C

WARNING – Avoid contact with the rechargeable Lithium-ion battery if it appears to be

leaking. Battery fluid is corrosive, and contact with it can result in personal injury and/or
property damage.
To prevent injury or damage:
– If the battery leaks, avoid cont
– If battery fluid gets into your
seek medical attention. Do not rub your eyes!
– If battery fluid gets onto your skin or clothing, immediately use clean water to wash off
the battery fluid.

WARNING – Charge and use the rechargeable Lithium-ion battery only in strict

accordance with the instructions. Charging or using the battery in unauthorized
equipment can cause an explosion or fire, and can result in personal injury and/or
equipment damage.
To prevent injury or damage:
– Do not charge or use the battery if it appears to be damaged or leaking.
– Charge the Lithium-ion battery only in a Trimbl
Be sure to follow all instructions that ar
– Discontinue charging a battery that gives
– Use the battery only in Trimble equipment that is specified to use it.
– Use the battery only for its intended use and according to the instruct
documentation.

act with the battery fluid.

eyes, immediately rinse your eyes with clean water and

e product that is specified to charge it.

e provided with the battery charger.

off extreme heat or a burning odor.

ions in the product

Juno Series Handhelds User Guide 17

Inserting and removing the battery

To insert the battery into the handheld:

1. On the back of the handheld, turn the back cover lock counter-clockwise to
un

lock it. Pull the back cover toward you to remove it.

2. To insert the battery, angle the left side
o

f the battery into the handheld first,
with the label facing upwards. Press
the battery flat until it clicks into place.

3. To replace the back cover, insert the
ottom edge of the cover first, and then

b
push it flat until the top clicks into
place. Turn the lock clockwise to
secure the back cover.

To remove the battery:

4. Remove the back cover of the handheld and then pull the right side of the
attery towards you.

b

C

CAUTION – The handheld is not sealed from water and dust when the battery is removed.
Trimble recommends only removing the battery for short periods of time and only
removing the battery indoors or from inside the protection of a vehicle.

Charging the battery

Charge the battery in the handheld (see page 17). To charge the battery, do one of the
following:

• Connect the AC power adaptor to the Power socket on the handheld and then

connect the adaptor to mains power. An international adaptor kit is provided
with the handheld.

• Connect the optional vehicle power adaptor to the Power socket on the

handheld and then connect the adaptor to the vehicle power source.

• Connect the mini USB cable to the handheld and then connect the cable to your

computer.

Note – U

SB may provide less power than mains or vehicle power. It may take longer
to charge the handheld using the mini USB cable, and it will also take longer to turn
on or operate the handheld if you are charging it from a completely flat battery.

When the handheld is connected to a power source, the battery icon in the Ho

me

screen changes to . Fully charging the battery from empty takes approximately four

hours. You can use the handheld while it is charging.

18 Juno Series Handhelds User Guide

The Power LED around the Power button on the handheld indicates the battery power
or charging status, as shown below:

Power source LED state Handheld/battery state

Battery power Off Off (in Suspend mode or turned of

Off On and battery level is good.

Flashing red On and battery is low (less than 10%).

External power Flashing green Charging.

Solid green Charging is complete.

f).

Avoid keeping the battery at full charge at high temperatures. For more information,
see Storage, page 13.

Note – The

life of the battery can be significantly shortened if power is constantly supplied
to the handheld. To avoid this issue, connect the handheld to an external power source
only when the battery requries charging. Once fully charged, disconnect the external power
source and allow the battery to discharge through normal use.

Checking the level of battery power

To check the level of battery power remaining at any time while the device is running,

ap the title bar of the Home screen and then tap in the pull-down list.

t

The Power control appears, displaying the Bat

tery tab.

When the handheld battery is recharging from an
e

xternal power source, the battery icon in the Home
screen changes to . You can still tap the icon to view
the level of battery power.

Low battery indicators

When the battery level reaches:

• 15%, the battery icon in the title bar of the Home screen changes to .

• 10%, the Power LED on the handheld flashes red and the Main battery low

message appears on the handheld.

• 5%, the Main battery very low message appears on the handheld.

Trimble recommends that you recharge the battery when any of these indicators
ap

pear.

Juno Series Handhelds User Guide 19

Conserving power

Although the handheld battery can operate for a full day without recharging, Trimble
r

ecommends that you do the following to reduce power consumption:

• Set the handheld to automatically turn off when idle. For more information, see

Suspend mode, page 21.

• Set the backlight to automatically turn off when the handheld is idle for a

specified time. For more information, see Backlight, page 37.

• Reduce the brightness setting for the backlight. For more information, see

Backlight, page 37.

• Turn off the integrated Bluetooth or Wi-Fi radios or cellular modem whenever

you are not using them. For more information, see Turning on and turning off

the integrated radios, page 48.

• Disconnect from the integrated GNSS receiver when GNSS data is not required,

using the application’s Disconnect or Deactivate GNSS command. When you
disconnect from GNSS, the integrated GNSS receiver switches off and stops
drawing power.

Note – D

o not disconnect from GNSS if you will be reconnecting within about five minutes.
A GNSS application can take up to 30 seconds to reactivate the integrated GNSS receiver,
so di

sconnecting to save power can cost time.

Turning on and turning off the handheld

If the screen on the handheld is blank, the handheld is in Suspend mode or has been
shut down. To turn on the handheld, press the
second).

To turn off the handheld or put the handheld into Suspend mode, press the
briefly (less than one second). The handheld is placed in a very low power state, but
the Bluetooth and wireless cellular modem radios may remain active (see Suspend

mode, page 21)

To completely shut down the handheld, press the
appears and then tap

Shutdown. All running applications are shut down, and the

handheld is completely turned off.

Power key briefly (less than one

Power button until the Power menu

Power key

20 Juno Series Handhelds User Guide

The options available from the Power menu are as follows:

Button Used to...

Power Settings quickly access the Power

Backlight Settings quickly access the Backlight Settings menu.

Shutdown put the handheld into Shutdown mode. Applications are shut down and

th

e handheld is completely turned off.

Reset restart the handheld

it does not respond when you press any of the keypad buttons, try a soft
reset. For more information, see Resetting the handheld, page 22.

access the Align Screen Sequ
key to access the Align Screen Sequence. If at any time the touch screen
does not respond correctly to stylus taps, start the screen alignment
sequence and follow the on-screen instructions.

Settings menus.

. If the handheld stops responding to the stylus, or if

ence. You can also press the left application

Suspend mode

C

When you press the

Power key to turn off the handheld, the handheld goes into

Suspend mode. This is a low-power mode that maintains the main memory contents
and keeps applications running but does not allow you to operate any of the
handheld’s functions. The handheld appears to be turned off. The integrated GNSS
receiver is turned off and any application using GNSS is disconnected.

If a wireless radio is turned on, the Wi-Fi radio will be turned off, and the Bluetooth and

reless cellular modem radios will remain turned on. The handheld is capable of

wi
receiving data via Bluetooth or the cellular modem radio while it is in Suspend mode.
The handheld is able to automatically wake up to calendar alarms if it is in Suspend
mode.

CAUTION – To save battery power, use the Wireless Manager to turn off the wireless
radios before you place the handheld into Suspend mode.

To turn on the handheld when it is in Suspend mode, press the Power key. The
handheld is immediately ready for operation. There may be a delay of up to 30 seconds
w

hile the integrated GNSS receiver and the Wi-Fi radio automatically reactivate.

You can configure the handheld to automatically enter Suspend mode when it has
b

een idle for a specified time. By default, the handheld is set to enter Suspend mode if

it is not used for three minutes.

Juno Series Handhelds User Guide 21

To change the time before the handheld enters Suspend
mode:

1. Tap the title bar of the Ho

me or the Start screen
and then tap . The Power control appears,
displaying the Ba

2. Tap the Ad

3. From the On

ttery tab.

vanced tab.

battery power option, select the Turn

off screen if device not used for check box and then

select the idle time from the drop-down list.

4. Tap

OK.

Resetting the handheld

If the screen on the handheld is blank, the handheld has turned off. Press the Power
button to turn on the handheld.

If the handheld stops responding to the stylus, or if it does not respond when you press

y of the keypad buttons, you may need to reset it. First, try a soft reset. If the

an
handheld does not respond, perform a hard reset.

You can also reset the handheld to its factory default settings.

Performing a soft reset

A soft reset is similar to restarting a computer. A soft reset saves data and closes all

en applications and then restarts the handheld. All data and settings are retained

op
after a soft reset.

To perform a soft reset, use the tip of the stylus to lightly press the Reset button.
Alt

ernatively, press the

Reset.

Power button until the Power menu appears and then tap

Performing a hard reset

A hard reset retains settings and data that you have previously saved on the handheld.
H

owever, any unsaved data may be lost.

Note – Per

To perform a hard reset, press and hold the

form a hard reset only if a soft reset does not resolve the problem.

Power button and use the tip of the stylus

to lightly press the Reset button.

Resetting to factory default settings

Reset the handheld to factory default settings to restore the handheld to its original
s

tate, or only if a soft reset and then a hard reset does not resolve the problem.

22 Juno Series Handhelds User Guide

C

CAUTION – Resetting the handheld to factory default settings erases all data, installed
applications, and settings stored in the handheld, except for any data or applications that
were pre-installed on the handheld or are stored on a memory card. It does not change
the language of the operating system used on the handheld.

C

B

CAUTION – If you have encrypted files on a memory card and you reset the handheld to
factory default settings, the encryption key on the handheld is deleted. This means that
any files you have encrypted on a memory card are permanently locked and unreadable
by any device. For more information, see Encrypting files on memory cards, page 25.

Tip – To quickly and easily restore data deleted by performing a factory reset, synchronize
the handheld with a computer before you reset the handheld to the factory default
settings. Once the handheld is reset, resynchronize the handheld with the computer.

To reset the handheld to the factory default settings:

Storing data

The handheld has two types of memory:

1. Press the

2. Press and hold the two soft keys on the handheld.

3. While holding the soft keys, press and hold the
prompt appears.

4. Follow the on-screen instructions to continue the factory reset.

• Storage memory is similar to the hard disk in a

computer, and is used for storing programs and
data.

Power button until the Power menu appears and then tap Shutdown.

Power key until the Hive Clean

C

• Program memory is similar to the RAM in a

computer, and is used for running programs. You
cannot use it to save data.

To check the memory capacity on the handheld, tap

/ Settings / Sy

Program columns show the current memory available,

e memory that is already in use.

and th

Pre-installed documents and program files are not
a

ffected by power loss or resetting. However, you can still lose data if you accidentally

delete or overwrite it.

CAUTION – The Windows Embedded Handheld 6.5 Professional operating system does
not include a Recycle Bin. When you delete files from the handheld, they are deleted
permanently.

Trimble recommends that you regularly copy important data to an office computer.
For more information, see Connecting to an office computer, page 43.

stem / Memory. The Storage and

Juno Series Handhelds User Guide 23

Memory cards

As an alternative to storage memory, you can save data to a memory card. Use either a
m

icroSD or a microSDHC (high capacity) memory card to securely transfer data to and

from another device that supports microSD or microSDHC memory cards.

C

C

Note – The

CAUTION – The presence of any dust or moisture in the memory card slot may adversely
affect the device and void your Trimble warranty. To prevent dust or moisture entering
the memory card slot:
– When inserting or removing a memory card, plac
surface.

CAUTION – Static electricity can harm electronic components inside the handheld. To
prevent static damage, discharge static electricity from your body before you touch any of
the electronic components inside your device, such as a memory module. You can do so by
touching an unpainted metal surface.

To insert a microSD or microSDHC memory card:

1. Turn off the handheld. See Turning on and turning off the handheld, page 20.

2. Place the handheld face down on a dust-free indoor surface.

3. Remove the battery cover door, and then remove the battery. See Inserting and

4. Slide the card slot cover to the left and it will hinge open.

5. Place the memory card in the slot with the swipes facing down.

6. Lower the cover and slide it back to the right. The card is locked into place.

Juno series handheld does not support SDIO (SD input/output) cards.

e the handheld on a dust-free indoor

removing the battery, page 18.

7. Replace the battery and the battery cover door.

When you select the Sa
in the list of available storage locations.

Note – D
removed. Data saved to a memory card is available only when the card is inserted in the
handheld.

To remove the memory card from the memory card slot:

1. Turn off the handheld. See Turning on and turning off the handheld, page 20.

2. Place the handheld face down on a dust-free indoor surface.

3. Remove the battery cover door, and then remove the battery. See Inserting and

4. Slide the card slot cover to the left to open it, remove the card, then lower the

5. Replace the battery and the battery cover door.

o not store required data or applications to a memory card if the card will be

removing the battery, page 18.

car

d slot cover and slide it to the right to lock it.

ve As option in an application, the memory card appears

24 Juno Series Handhelds User Guide

Encrypting files on memory cards

To prevent sensitive data on a memory card from being used if the card is lost or
stolen, files can be encrypted as they are placed on the card.

When encryption is enabled, an encryption key is stored on the handheld. Files are
encr

ypted as they are copied or written to the memory card. Files already saved on

memory cards before enabling encryption are not automatically encrypted.

C

Note – B

ecause the encryption key is stored on the handheld, encrypted files are only
readable on the handheld on which they are initially encrypted. It is not possible to read
encrypted files on the storage card with any other device, including another Juno series
handheld or an office computer.

CAUTION – If you reset the handheld to the factory default settings, the encryption key is
deleted and the handheld is no longer able to read any encrypted files on a memory card.
This means that any files you have encrypted are permanently locked and unreadable by
any device. To avoid being unable to read previously encrypted files, Trimble recommends
that you use another device, such as an office computer, as the primary location for
storing important data and to control the encryption of important files.

To enable encryption of files as they are written to a memory card:

1. Tap / Settings / Sy

2. Select the En

Note – En

crypted files appear as ordinary files on the handheld they were encrypted on. If

crypt files when placed on a storage card check box.

stem / Encryption.

the memory card is inserted in another device, the files appear with a .menc file extension
and cannot be opened.

To disable encryption, clear the En

Note – D

isabling encryption does not remove encryption from any existing files on the

crypt files when placed on a storage card check box.

memory card, but ensures that new files placed onto the memory card are not encrypted.

To encrypt files that are already stored on a memory card:

1. Copy the files to the handheld’s internal memory or to an office computer.

2. Ensure encryption is enabled on the handheld.

3. Copy the files back to the memory card. The files are encrypted as they are
wr

itten to the memory card.

To remove encryption from files so they can be read by other devices:

1. Insert the memory card in the handheld and then connect the handheld to an
o

ffice computer (see Connecting to an office computer, page 43).

2. Copy the encrypted files from the memory card to the office computer.

3. To use the decrypted files on the handheld, copy the files from the office
c

omputer to the handheld’s main memory.

4. To store the decrypted files on a memory card, ensure that encryption is not
enabl

ed on the handheld and then copy the decrypted files from the office

computer to the memory card.

Juno Series Handhelds User Guide 25

Installing and removing the SIM card

C
C

C

CAUTION – The SIM card and its contents can be easily damaged by scratches or bending.
Use caution when inserting or removing the card.

CAUTION – The presence of any dust or moisture in the SIM card slot may adversely affect
the device and void your Trimble warranty. To prevent dust or moisture entering the SIM
card slot:
– When inserting or removing a
surface.

CAUTION – Static electricity can harm electronic components inside the handheld. To
prevent static damage, discharge static electricity from your body before you touch any of
the electronic components inside your device, such as a memory module. You can do so by
touching an unpainted metal surface.

To insert or remove a SIM card:

1. Turn off the handheld. See Turning on

and turning off the handheld, page 20.

2. Place the handheld
dust-free indoor surface.

3. Remove the battery cover door, and
t

hen remove the battery. See Inserting

and removing the battery, page 18.

SIM card, place the handheld on a dust-free indoor

face down on a

4. Insert or remove the SIM card as shown,
wi

th the gold contacts face down.

5. Replace the battery and the battery cover door.

26 Juno Series Handhelds User Guide

Using the Windows Embedded Handheld operating system

Start screen

Tap any item on
the menu to
open it.

Start button

Tap to open the Start
screen, where you can access
programs and system
controls.

Title bar

Contains status icons for important
system functions.

Tile bar

Contains touchable tiles
providing access to applications,
menus, and notifications.

Home screen

Provides access to the key
functions on your
handheld. Scroll, and tap
any item to open it.

Connectivity icons

Tap either icon to access the
Wireless Manager.

Lock device

Tap to lock the screen.
Once locked, you have
multiple points of
unlock entry depending

Pull-down list

Tap anywhere on the title
bar to open the title bar
pull-down list, where you
can access connectivity
controls (the Wireless
Manager), battery
information, time and date
settings, and volume.

The Juno series handhelds are powered by the Windows Embedded Handheld 6.5
Professional operating system. The main parts of the Home screen and the Start screen
are shown below.

Juno Series Handhelds User Guide 27