Tributaries HXC6IR User Manual
over CAT6 with IR Control
HXC6IR
Extends HDMI 140 feet
www.tributariescable.com
over CAT6 with IR Control
Table of Contents
HXC6IR
1. Introduction ......................................................................................
2. Features .............................................................................................
3. Package Contents ..............................................................................
4. Operation Controls and Functions ...................................................
4.1 Transmitter ..............................................................................
4.2 Receiver ...................................................................................
5. Pin Assignments ................................................................................
5.1 IR Pin Assignments ..................................................................
5.2 RJ45 Pin Assignments ..............................................................
6. Specifications .....................................................................................
7. Connection and Installation .............................................................
1. Introduction
Tributaries HXC6IR HDMI & IR transmitter & receiver over CAT6 is a fully digital
product. Many similar type units are actually analog; they convert the digital
HDMI signal to analog in the transmitter unit, send it to the receiver unit via
CAT5E cable where it is converted back to a digital signal. Not only is this an
expensive design but it also sacrifices performance by the repeated digital to
analog and analog to digital conversions.
1
2
2
3
3
4
5
5
5
6
6
Consisting of 2 units, a transmitter and a receiver, the Tributaries HXC6IR can
extend an HDMI signal and the source’s IR signal over dual CAT6 cables for a
distance up to 145 feet (45 meters). The installation of the Tributaries HXC6IR
is quick and easy. Simply place the transmitter next to your HDTV source, such
as a DVD player, and then place the receiver close to your display. Complete the
installation using Tributaries HDMI cables, the IR blaster & receiver (included)
with the HXC6IR and 2 runs of CAT6.
1
To double your maximum distance, add the Tributaries HXC6R Repeater
(optional). This passive device can be inserted at the end of the appropriate
length of CAT6 cable run from the Tributaries HXC6IR transmitter unit. A similar
length of CAT6 can be run to the Tributaries HXC6IR Receiver unit. The HXC6R
supports all the features of the HXC6IR.
It is possible to substitute CAT5E cable for the CAT6. However, the maximum
resolution capability will be limited to 1080p/8 bit color, HDMI v1.2.
All units are HDMI v1.3 certified supporting 12 bit Deep Color and new lossless
compressed Digital Audio: Dolby TrueHD®, Dolby Digital Plus and DTS®-HD
Master Audio with a bandwidth up to 2.25 GHz.
2. Features
Extends 12 bit color 1080p resolution up to 20 meters over dual CAT6.•
Extends 8 bit color 1080p resolution up to 45 meters over dual CAT6. •
Supports IR signal transmission from remote source to display over same dual CAT6.•
Supports the full range of IR frequencies from 20-60KHz.•
Supports new lossless compressed Digital Audio like Dolby TrueHD, Dolby Digital •
Plus and DTS-HD Master Audio.
Equalization and timing of incoming TMDS data signal prior to re-transmission. •
Supports HDMI input and output cables up to 15 meters.•
CAT6 can be cascaded using Tributaries HXC6IR repeater for greater distance.•
Compliant with HDMI 1.3 HDCP 1.1 and DVI 1.1 standards.•
Supports CEC bypass.•
Supports xvYCC.•
3. Package Contents
HXC6IR-TX Transmitter•
HXC6IR-RX Receiver•
IR receiver cable•
IR blaster cable•
Two 5V/1A universal power supplies•
Operation manual•
2
Loading...