TRENDnet TVIP612WN User Manual

Quick Installation Guide

TV-IP612WN

1.01

Table of Contents

English 1

1. Before You Start

2. 2

Hardware Installation and Configuration

Troubleshooting 8
Wireless Tips 9

1

Version 08.26.2010

1. Before You Start

Package Contents

TV-IP612WN

?

?CD-ROM (Utility and User’s Guide)
?Multi-Language Quick Installation Guide
?2 x 2dbi Detachable Antenna
?Cat. 5 Ethernet Cable (1.5m/5ft.)
?Mounting Kit
?Power Adapter (12V DC, 2A)

System Requirements

A computer with a wired network adapter properly installed.

?

CD-ROM Drive

?

?VGA Resolution: 800 x 600 or above
?Web Browser: Internet Explorer (6.0 or higher)

?Wireless router or Access Point
?An available DHCP Server –routers usually have a built-in DHCP server

Supported Operating Systems

Windows 7 (32/64-bit)
Windows Vista (32/64-bit)
Windows XP (32/64-bit) / 2000

CPU Memory

1.3GHz or above

1.3GHz or above

1.3GHz or above

1GB RAM or above
512MB RAM or above
256MB RAM or above

1

2. Hardware Installation and Configuration

Note:

1． It is recommended that you configure the IP Camera from a wired computer.
2．If you would like to use IPViewPro 2.0 software, please install the software by clicking

the Install IPView Pro 2.0 in the Autorun window and refer to the User's Guide on the
CD for more information

1. Insert the Utility CD-ROM into your CD-ROM
drive.

2. Click Run autorun.exe (Windows 7/Vista only).

3. Click Setup Wizard.

4. Click Next. Then follow the Setup Wizard

instructions.

2

5. Click Close.

6. Double click on the SetupWizard icon on your

desktop.

7. Attach the antennas to the IP camera.

8. Connect a RJ-45 network cable from a

Switch/Router to the Ethernet port on the IP
Camera.

9. Connect the Power Adapter to the IP Camera

and then to a power outlet.

10. Click Next.

11. Select the IP camera and click Next.

3

12. Enter your ID and password. Then click Next.

By default:

ID: admin
Password: admin

13. Configure the Camera Name and Camera

Time. Click Copy Local Time to automatically

configure the Camera Time to match your
computer. Then click Next.

14. If you would like to change the administrator

password, click Change Password, enter a
new password, retype the new password and
then click Next. Leave Change Password
unchecked if you do not wish to change the
password.
Note: Password is limited to up to 8 characters.

15. Select DHCP and then click Next.

16. Click I want to use wireless for the camera

and then click Next .

4