Trendnet TV-IP252P User's Guide

TRENDnet User’s Guide

Cover Page

TRENDnet User’s Guide

Contents

Product Overview .................................................................................... 2

Package Contents ...................................................................................................... 2

Features .................................................................................................................... 2

Product Hardware Features ....................................................................................... 3

Application Diagram .................................................................................................. 4

Installation ............................................................................................... 4

Hardware Installation ............................................................................................ 4

Camera Installation ............................................................................................... 5

Table of Contents

Starting Camera Finder (IPSetup) ............................................................ 8

Configuration ......................................................................................... 10

Viewing Camera Basic Function................................................................................ 10

Configuring the Camera Setting ............................................................................... 11

Smart Wizard ........................................................................................................... 12

Basic ........................................................................................................................ 13

Network .................................................................................................................. 15

Video & Audio ......................................................................................................... 18

Event Server ............................................................................................................ 20

Motion Detect ......................................................................................................... 23

Event Config ............................................................................................................ 23

Tools ....................................................................................................................... 26

Device Info .............................................................................................................. 27

How to setup/access the camera behind a Router ................................ 28

Technical Specifications ......................................................................... 31

Troubleshooting..................................................................................... 32

TRENDnet User’s Guide

Product Overview

Features

The PoE Dome Internet Camera (model TV-IP252P) is designed for indoor enterprise class security surveillance applications. View and manage the tamper resistant dome IP camera from any Internet connection.

Manually pan the camera side-to-side 350 degrees and tilt it up-and-down 160 degrees to fix its final viewing angle. No need to install this camera near a power source, power and data are received through a single Ethernet cable using Power over Ethernet (PoE) technology.

Manage up to 32 TRENDnet cameras with the included complimentary camera management software. Advanced features include motion detection recording with two motion detection windows, email alerts, scheduled recording sessions, Samba client

TV-IP252P

Package Contents

 TV-IP252P  Multi-Language Quick Installation Guide  CD-ROM (Utility, Software &User’s Guide)  Network cable (1.5m / 5ft)  Power adapter (12V DC, 1.5A)  Camera mounting kit

If any package contents are missing or damaged, please contact the retail store, online retailer, or reseller/distributor that the item was purchased.

saves video to network storage devices, dual streaming MPEG-4/MJPEG image compression, two-way audio support (microphone and speaker sold separately), Input/Output ports, digital zoom and an analog BNC video-out connector. A wall/ceiling mounting kit is included and the off-white IP camera housing blends into most environments.

* TRENDnet’s Mobile APP supports iPhone®, iPad®, iPod® Touch and

Android. Search for SecurView Mobile from iTunes® or Google Play™. For future updates, please check www.trendnet.com/App for details.

** Monitoring multiple cameras may required a high performance CPU

TRENDnet User’s Guide

Product Hardware Features

 Ethernet/PoE Port: Connect the provided network cable (RJ-45 type). The

connector supports Power over Ethernet standard (PoE), enabling the camera to be powered by the Ethernet.

 Power: Connect the provided power adapter to supply power to the camera if

not using PoE.

 GPIO: Connected the provided external GPIO connector to the device, and

then connect the external device (such as motion detection, event triggering or alarm system) to GPIO adapter.

 BNC connector: Connect the external monitor to BNC connector

Inside Component

 Lens Focus Adjustment: Adjust the focus either clockwise or counter

clockwise.

 Reset button: Press the button to restart the camera. Press and hold the

button for five seconds, the camera will resume the factory default settings.

 LED indicators: Indicates the camera is powered on with the steady

amber light and the link activity with blinking green light

 Link & Power switches:

The two switches allow you to manually turn of the LED indicators.

TV-IP252P

 Mic In: Connect an external microphone.  Speaker Out: Connects an external speaker.

TRENDnet User’s Guide

Application Diagram

Installation

Hardware Installation

The camera can be mounted to the ceiling surface directly by following the steps below:

1. Remove the Dome cover by unscrewing the four screws.

TV-IP252P

2. Use the included drill template to drill three mounting holes on the desire location and hammer the plastic anchors into the holes.



TRENDnet User’s Guide

3. Secured the camera to the location with three screws.

4. Before put the Dome cover back, adjust the lens assembly by the following steps:  Tilt the camera lens to a proper position by loosing the screws () and then

swinging the adjustable base ().

 Rotate the camera lens by turning the base pedestal () in either clockwise or

counter clockwise direction.

 Adjust the lens focus by turning the lens ring slowly () in either clockwise or

counter clockwise direction.

Camera Installation

1. Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate the Auto-Run program.

2. Click the Install Camera.

TV-IP252P

NOTE: You can review the image quality from the Web browser when you complete the

installation. If the image quality is poor, you have to disassemble the Dome cover to adjust the lens focus until the desired image appears clearly.

5. Put the Dome cover back and secure with four screws.

TRENDnet User’s Guide

3. Write down the MAC ID of the camera

4. If you are using PoE to supply power to camera, please skip to the next step. To power up the camera, plug in and connected the power adapter to the camera. You can verify the power connection by checking the amber LED on the camera.

5. Connect a network cable to the camera’s network port and then to your router. If you are using the PoE, please ensure the cable is connected to a PoE switch or PoE injector.

6. Wait while the utility is searching the cameras.

TV-IP252P

TRENDnet User’s Guide

7. The founded cameras will show on the screen. The camera already selected by default if you have only one camera installed. If you have more than one camera in the same Network, you will need to identify the camera by the MAC ID.

8. Type in the Password. The password is “admin” by default. We strongly suggested changing the camera’s password. The Change Password option is enable by default.

9. Click here on the screen to access the camera now or click Next button for later accessing.

10. Click Finish to exit the program or click Home return to the main screen.

TV-IP252P

TRENDnet User’s Guide

Starting Camera Finder (IPSetup)

3. Click the IPSetup from the Auto-Run menu screen. Then the IPSetup Wizard will appear. Click Install to install the utility.

The camera comes with a conveniently utility, IPSetup, which is included in the Installation CD-ROM, allowing you to search the camera on your network easily.

1. Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate the Auto-Run program.

4. When the Completing the IPSetup Setup Wizard appears, click Finish.

TV-IP252P

2. Click the Camera Finder (IPSetup) from the Auto-Run menu screen.

TRENDnet User’s Guide

5. After installing the IPSetup utility, the application is automatically installed to your computer, and creates a folder in Start\Program\TRENDnet\IPSetup.

6. Click Start>Programs>TRENDnet>IPSetup, and then click IPSetup.

7. The IPSetup window will appear. It will search for the camera within the same network.

- Camera Display Area: By default, the IP setting on the Camera is set to DHCP. If you have DHCP server, the camera will automatic get the IP address from DHCP server. If you do not have DHCP server on your network, it will show the default IP as 192.168.10.30. Double click the IP address; it will link to Camera’s Web Configuration page.

- Change IP: Click this button to bring up the following window. It allows you to

change the IP Address. You can select either Static IP or click DHCP. Then, enter the Administrator ID & Password. By default the ID/Password is: admin. When complete, click Change.

TV-IP252P

Camera Display Area

- Search: Click this button to search the connected camera in the same network

- Exit: Click this button to exit the program.









TRENDnet User’s Guide

Configuration

After you login into the Web Configuration of the camera, the main page will appear as below:

Viewing Camera Basic Function

Open the Web browser on your computer (example showed in the User’s Guide is based on the Internet Explorer). Type the default IP address (192.168.10.30) or the IP address found by IPSetup in the Address bar, and then press [Enter].





When the login window appears, enter the User name (admin) and the Password. By default, the password is admin. If you have change the password during camera installing, please enter the password that you have updated. Click OK to link to camera’s Web Configuration.



The Main screen of the Web Configuration provides you with many useful information and functions, including:

TV-IP252P

 Live View/Setup Switch:

 Click the button to configure the camera.  Click the button to return to the Main screen to view the live

view image.

NOTE: If you are initially access to the camera, you will be ask to install a new plug-in

for the camera. Permission request depends on the Internet security settings of your computer. Click Yes to proceed.

 Compression Buttons: Select to transmit and record the video using MPEG4, or

MJPEG compression.

 Function Buttons: Use these buttons to control the audio, video, and trigger

functions.

 Manual Record allows you manually record and save a video clip*.

TRENDnet User’s Guide

 Snapshot allows you to capture and save a still image*.  Browse allows you to assign the destination folder to store the video clips and

still images*.

 Talk allows you to speak out through the camera. Please note only one user is

allowed to use this function at a time.

Configuring the Camera Setting

To configure the camera, click on the Main screen of Web Configuration. The Web Configuration will start from the Basic page.

 Listen allows you to receive the on-site sound and voice from the camera.  Trigger Out allows you to trigger on/off the GPIO output manually.

 Live View: The Live View Image window displays the real-time image of the

connected camera.

 The current compression mode of image is displayed above the Live View

Image window.

 Click the Zoom In buttons above the Live View Image window to zoom

in the live view image by 1x, 2x, or 3x.

 Camera Information: Displays the camera’s location and the current date & time.

The information can be modified in the Web Configuration.

TV-IP252P

 If you are using Microsoft 7/Vista platform, you may not be able to find the

recorded files by Snapshot or Manual Record. You will need to disable the protected mode of Security in the IE browser before recording a video file or taking a snapshot.

Please follow the below steps:

1. Open IE Browser then select Tools  Internet Options

2. Select Security

3. Uncheck the ”Enable Protected Mode” then press OK

The Web Configuration contains the settings in the left menu bar, including Smart Wizard, Basic, Network, Video/Audio, Event Server, Motion detect, Event Config, Tools, and Device Info.

+ 25 hidden pages