Trendnet TPE-3018LS Datasheet

TPE-3018LS

18-Port Gigabit PoE+ Smart Surveillance Switch

TPE-3018LS (v1.0R)

• 16 x Gigabit PoE+ ports

• 2 x Shared Gigabit ports (RJ-45 or SFP)

• 220W PoE power budget

• Easy-to-use web-based management interface

• Supports IPv6, LACP, VLAN, QoS, and IGMP Snooping

• Extend PoE+ signal up to 656 ft./200m at 10Mbps

• Front panel 4-digit LED display provides PoE power statistics

• Surveillance mode GUI for simplified configuration and
network monitoring

• Device discovery for ONVIF compliant IP cameras and NVRs

TRENDnet's Gigabit PoE+ Smart Surveillance Switch series is designed to simplify the installation and management of surveillance
networks, especially for integrators and installers. These ONVIF switches are optimized for the surveillance industry; surveillance
mode provides a graphical dashboard interface with detailed information about the switch and each connected PoE device. Connect
ONVIF compliant IP cameras and NVRs for more advanced capabilities such as changing device IP settings, and to view individual
IP camera video within the switch GUI. The Smart Surveillance Switches are also PoE self-healing switches featuring PoE device
auto-recovery and power scheduling.

• Upload building floorplans to create an E-map of surveillance
devices

• Change IP camera IP address settings

• Upgrade IP camera firmware

• Change IP camera administrator user name and password

• Bandwidth control per port

• 802.1Q, MAC, Surveillance, and Voice VLAN support

• IEEE 802.1p QoS with queue scheduling support

• Smart Fan

• 36Gbps switching capacity

• Lifetime Warranty

Installers and integrators can save on equipment costs and reduce installation time with TRENDnet's Gigabit PoE+ Smart
Surveillance Switches by delivering up to 30W per port of PoE power and data over existing Ethernet cables. Available PoE port
controls include enabling and disabling PoE, PD alive check, and power scheduling. PD alive check is an automated PoE self­healing switch feature that attempts to recover an unresponsive PoE device connected to the switch. If a PoE device such as a PoE
camera becomes unresponsive to pings, the ONVIF compliant switch will auto-reboot the PoE port in attempt to recover the device.

TPE-3018LS

These PoE+ ONVIF switches feature a 4-digit LED display showing total PoE power, available power, and power-per-port. They also
support long distance PoE+ networking up to 656 ft./200m away at speeds up to 10mbps. TRENDnet's Gigabit PoE+ Smart
Surveillance Switches also feature SFP slots to support long-distance fiber networking applications.

Advanced managed switch features include LACP to group ports together to increase bandwidth between switches, VLANs for
segmenting and isolating virtual LAN groups, QoS for traffic prioritization, port bandwidth controls, and SNMP monitoring, making this
ONVIF switch a powerful SMB network solution. Improve voice performance by isolating and prioritizing VoIP traffic from normal data
traffic with the easy-to-use voice VLAN feature.

Smart Surveillance Management

These managed ONVIF switches are optimized

for the surveillance industry; surveillance mode

provides a graphical dashboard interface with

detailed information about the switch and each

connected device.

NETWORKING SOLUTION

Integration Flexibility

Managed switch features include access

control lists, VLAN, IGMP snooping, QoS,

RMON, SNMP, and syslog for monitoring and

flexible network integration.

PoE Device Alive Check

PD alive check is an automated PoE self­healing switch feature that attempts to recover
an unresponsive PoE device connected to the
switch. If a PoE device such as a PoE camera

becomes unresponsive, the ONVIF compliant

switch will auto-reboot the PoE port in attempt

to recover the device.