Trendnet TPE-104GS Datasheet

TPE-104GS

Gigabit PoE Splitter

TPE-104GS (v2.0R)

• Power a non-PoE device up to 100 meters (328 ft.) away

• Splits a gigabit PoE signal into separate power and gigabit data sources

• Adjustable voltage output supports 5V, 9V, or 12V devices

• Use this compact device with PoE switches or injectors

• Save on installation and equipment cost

• Full Duplex Gigabit speeds

• IEEE 802.3af PoE compatible

TRENDnet’s Gigabit PoE Splitter, model TPE-104GS, networks a non-PoE device in a remote location using a PoE network connection. The
TPE-104GS splits a Gigabit PoE connection into separate power and Gigabit data sources. A convenient dip-switch adjusts output power to 5V, 9V, or
12V in order to match non-PoE device power requirements. The included combination 2.0 and 2.5mm jumper cable provides greater device compatibility.

TPE-104GS

PoE Powered

No power adapter necessary; the TPE-104GS
takes a PoE network connection, and splits
power and data into separate connections to
network a non-PoE device with power up to
100m (328 ft.).

Networking Solution

Adjustable Voltage Output

Convenient dip-switch adjusts voltage output
to 5V, 9V, or 12V in order to match non-PoE
device power requirements.

Wall Mountable

Wall mountable design accommodates most
installation scenarios.