Trendnet TE100-S4PCI User Manual
TE100-S4PCI
4-port 10/100Mbps N-way Ethernet Switch Card
The TE100-S4PCI is a 4-port 10/100Mbps Fast Ethernet
Switch Card for the PCI bus. This device integrates 4
10/100Mbps Fast Ethernet switch ports into a 10/100Mbps
PCI card. With Plug-and-Play function, you can easily install
and configure the switch card automati-cally. The N-way ports
auto-negotiate between 10Mbps and 100Mbps, as well as
between half- and full-duplex modes, which allows the speed
up to 200Mbps. Ideal for small workgroups, you can
experience two-in-one function with TRENDnet's switch card.
TRENDnet
TRENDware, USA
What's Next in Networking
FEATURES BENEFITS
Complies with IEEE 802.3 10Base-T and IEEE 802.3u
100Base-TX standards
Complies with ANSI/IEEE 802.3 N-way auto-negotiation
4 RJ-45 connectors for four network segment connections
Port 4 supports MDI-II or MDI-X (push button)
PCI bus master memory access for high throughput and
low CPU demand
Plug and Play installation
Half- and full-duplex with auto-negotiation
Data forwarding and filtering rate for 10/100Mbps speed
Up to 1K active MAC address entry table with selflearning and table-aging
1 MB RAM buffer per device
Performance:
Operate in the 32-bit bus master mode,
delivering throughputs as multimegabits per second with little stress on
the host's CPU.
Flexibility:
Provides PCI Ethernet card and
integrated switch in one unit for highperformance and cost-effectiveness.
Speed:
Supports 10/100Mbps and make it ideal
for high-speed server when the speed
increases up to 200Mbps with fullduplex mode.
Compatability:
Compatible with major operating
systems.
Store-and-forward packing switching method
Compatible with all major network operating systems
5 Year Warranty
TE100-S4PCI (11-17-2002)
TE100-S4PCI
TE100-S4PCI
4-port 10/100Mbps N-way Ethernet Switch Card
4-port 10/100Mbps N-way Ethernet Switch Card
SPECIFICATIONS
Standards:
• IEEE 802.3 10Base-T, IEEE 802.3µ 100Base-TX,
ANSI/IEEE 802.3 N-way auto-negotiation
Protocol:
• CSMA/CD
Network Media:
• UTP CAT 3 (10Mbps), UTP CAT 5 (10/100Mbps),
EIA/TIA-568 100-ohm screened twisted pair (STP)
(10/100Mbps)
Data Transfer Rate:
• 10/100Mbps (Half-duplex), 20/200Mbps (Full-duplex)
Power Consumption:
• 12 Watts max.
Network Drivers:
• Novell NetWare ODI, NDIS, SCO UNIX, LAN Manager,
Windows 95/OSR2/98/2000/NT, Windows for Workgroups,
Packet Driver, LAN server, Warp server, Linux and more
Diagnostic LED’s:
• Link/Activity, 100M Indicator, Collision/Full-duplex
Temperature:
• Operating Temperature: 0° to 55° C (32° to 131° F)
• Storage Temperature: -20° to 70° C (-4° to 158° F)
Humidity:
• Operating Humidity: 10 % to 90 % non-condensing
• Storage Humidity: 5 % to 90 % non-condensing
Certifications:
• FCC, CE, VCCI-II
NETWORKING SOLUTIONS
To Order Please Call:
1-888-326-6061
PRODUCT INFORMATION
TE100-S4PCI
4-port 10/100Mbps N-way Ethernet Switch Adapter
ORDERING INFORMATION
TRENDware International, Inc.
3135 Kashiwa Street
Torrance, CA. 90505. USA
Tel: 310-891-1100
Fax: 310-891-1111
www.TRENDNET.com
Web:
Email: sales@trendware.com
TRENDnet
R
TRENDware, USA
TRENDnet is a registered treademark of TRENDware International, Inc. Other Brands and product names are trademarks of their respective holders. Information provided in this
document pertain to TRENDware products and is subject to change at any time, without notice. For the most recent product information please visit
Copyright TRENDware International, Inc. 2004. All Rights Reserved.
©
http://www.TRENDNET.com.
____________________
Loading...