Thank you for buying the i.Gear Terres. We are confident that this product will be the
source of much enjoyment. Please read the following instructions carefully so that
you can become acquainted with the functions of this product and its use.
Current product information can be found at the TrekStor Website www.trekstor.de.
Included in the delivery
· i.Gear Terres
· Quickguide
·Telescopic antenna
·Magnetic base antenna
·MCX adapter
·USB 2.0 cable
System requirements
·iPad® 2/iPad® 3 (iOS 4.3.3 or later)
·iPhone® 4S (iOS 5.1)
1) Hardware installation
To put the DVB-T stick into operation, you must perform the following steps:
A) Charge the battery fully first. Use the included Micro-USB cable with a suitable
USB charger or a computer with an available USB port.
The charging indicator on the front panel lights up red and changes to green
i
when the battery is fully charged.
B) Connect the antenna with the i.Gear Terres. Plug the i.Gear Terres into the Apple®
Connector of your iPad® or your iPhone®.
7
EN
2) Software installation
Once you plug the i.Gear Terres to your Apple®
device, there will appear a notification automatically.
Press YES to download and install the iDTV Mobile
app on your Apple® device. After you proceed
the installation, there will be an icon appear
on your iPad®'s or iPhone®'s desktop.
3) Launch the iDTV Mobile app
Click the iDTV Mobile icon to launch the app.
Select "Settings" and press "Scan channels".
Select your country and press the "Scan" button.
lt's now scanning the local DTV channels.
lf there's no scanning response, please change
i
the antenna or take the Apple® device outside
or somewhere near the window.
If you select a location which is different to your
i
real location, there will appear a message
due to the unsupported digital broadcasting
standard. For example, you are currently in Europe
and select Japan and try to scan the channels.
lf you experience such problem, quit your
iDTV Mobile app and take off the i.Gear Terres
of your Apple® Connector. Reconnect the
i.Gear Terres to your Apple® device and
launch the application again.
4) DTV Signal testing
After the channel scanning is finished, there will be a channel List appearing. The contents
of the Iist will depend on your location or country. Choose any of the scanning channels
and follow the app's user guide to learn how to watch TV program and use all the other
features of the iDTV Mobile application.
EN
8
5) Troubleshooting
I have poor reception or found only few or no stations during the station scan.
This usually means that the signal quality is too weak. It is possible that few or no stations
can be received, depending on the region and location of the antenna. If you are outside
of the reception area of DVB-T, no DVB-T reception is possible. If you are on the outskirts
of DVB-T reception, you will usually not receive all broadcasted stations.
To improve reception quality, change the position of the antenna. Positioning the antenna
outside of the building can significantly improve reception quality. Furthermore, it is
recommended to use the magnetic base antenna instead of the telescopic antenna,
in case of a poor reception, as the magnetic base antenna obtains a better coverage
through the different positioning options. Alternatively, you can also use another
DVB-T signal source (house connection, outside antenna, active indoor antenna)
instead of the provided magnetic base antenna.
Information on the reception areas and the expected reception quality can be found
in the Internet under http://www.digitag.org.
9
EN
Instructions for safety and use:
Only qualified persons may perform technical work on the product. The product may not be opened
or changed. The components cannot be serviced by the user.
d
Never expose the device to moisture, condensation and liquids.
e
Protect the device from extremely high and low temperatures and temperature fluctuations.
Use the device within an ambient temperature of 5º C to 40º C.
k
Never place the device close to a source of heat and protect it from direct sunlight.
m
Make sure that the surroundings are as dust-free as possible when you use and store the device.
h
Never clean the surface of the device with solvents, paint thinners, cleansers or other chemical products.
Instead, use a soft, dry cloth or soft brush.
g
The manufacturer retains the right to continually improve the product. These changes may be made without
being directly described in these operating instructions. For this reason, the information provided in these
operating instructions may not reflect the current state of the art. The manufacturer only guarantees suitability
for the product's intended purpose. In addition, the manufacturer is not responsible for damages or loss of
data and subsequent consequences.
For questions or problems regarding regarding the app iDTV Mobile, please contact directly the manufacturer
of the app.
App Store is a service mark of Apple Inc. All other trademarks belong to their respective owner. Use of
this product is subject to your acceptance of the software licensing agreement included in this package.
Apple, iPad and iPhone are registered trademarks of Apple Inc. in the United States and/or other countries.
The manufacturer also declares the conformity of the product according to the following directives:
■
2001/95/EC G eneral Product Safety
■
2002/95/EC RoHS: Hazardous substances in electrical and elec tronic equipment
■
2009/125/EC Ecodesign requirements for energy-using products
TrekStor GmbH
Kastanienallee 8 - 10
D-64653 Lorsch, Germany
Sound and television broadcast receivers and associated equipment – Radio disturbance characteristics –
Limits and methods of measurement (IEC/CISPR 13:2001, modied + A1:2003 + A2:2006)
Sound and television broadcast receivers and associated equipment – Immunity characteristics –
Limits and methods of measurement (IEC/CISPR 20:2006)
Audio, video and similar electronic apparatus – Safety requirements
(IEC 60065:2001 modied + A2:2010 modied)
Limits – Limits for harmonic current emissions (equipment input current 16 A per phase)
(IEC 61000-3-2:2005 + A1:2008 + A2:2009)
Limits – Limitation of voltage changes, voltage uctuations and icker in public low-voltage
supply systems, for equipment with rated current 16 A per phase and not subjected to conditional
connection (IEC 61000-3-3:2008)
Lorsch, 31.10.2012
Thorsten Koroscha, LPM
Supportinformationen
Sollten Sie Fragen zu Ihrem TrekStor Produkt haben, gehen Sie bitte wie folgt vor: