Treasure Garden GP12120 User Manual
Garden Pavilion
12 ’x12 ’
SQ
Aluminum
Assembly and Operation Guide
1 Angled Pole 4
2 Vertical Corner (Upright) Post 4
3 Horizontal Side Beam 4
4
Joint Adapter 8
5
Track Adapter 8
6 Corner Joint 4
7
Corner Brace (Left) 4
8
Corner Brace (Right) 4
9 Top Connection 4
10 Center Hub 1
11
Finial 1
12 Knob 4
13
Mounting Plate (2 parts) 4
GARDEN PAVILION PART LIST
Part Description Qty.
Plate &
Stem Insert
Vertical
Adapter
The Garden Pavilion and its parts are packaged in four (4) separate cartons.
Carton contents include:
CARTON 1 - Vertical Corner (Upright) Posts | Angled Poles | Light Pole
CARTON 2 - Horizontal Side Beams
CARTON 3 - Corner Joints and Pavilion Hardware
CARTON 4 - Pavilion Fabrics (Roof, Corners, Ties, and Walls)
Please remove all contents from each carton, inspect and review part list.
CAUTION: To reduce personal injury and damage to your Pavilion, read and follow this
assembly and operation guide We recommend a two-person team for assembly and
disassembly. Save information for future reference.
29
14
Hexagon Wrench (Large) 1
15
Hexagon Wrench (Small) 1
16 Hexagon Screw (Long) ìCenter Hub ” 4
17
Hexagon Screw (Medium) 8
18 Hexagon Screw (Short) 16
19
Light Pole 1
20 Light Pole Extender 1
21
S-Hook 1
22 Plug 16
23
Track Hook 80
24
Roof 1
25
Walls 8
26
Corners 4
27
Ties 4
28
Base Adapter Bolts 4
(For use with optional umbrella base)
29
Expansion Bolts 16
(For use with concrete application)
30
Nails 16
(For use with grass application)
PAVILION PART LIST
(continued from page 1)
Part Description Qty.
“Corner Joint”
“Corner Brace”
NOTE: Prior to assembly it is important to decide your Pavilion location, mounting and
application options (see page 3). Choose a location that is level, sturdy and avoid sloping
or soft ground.
Optional umbrella base (sold separately)
15
13
12
13
2
12
Knob
12
Vertical Corner (Upright) Post
2
Mounting Plate (2 parts)
13
Base Adaptor Bolt
Plate & Stem Insert
28
Hexagon Wrench (Small)
15
2
Vertical
Adapter
Vertical
Adapter
28
Optional Umbrella Base
Grass Application:
If Pavilion is to be
placed on grass, secure with #30 nails
provided. (4 bolts per mounting plate)
Concrete Application: If Pavilion is
to be used placed on concrete, secure
with #29 expansion bolts provided.
(4 bolts per mounting plate)
Expansion
Bolts
29
Nails
30
Loosen the 2 mounting plate screws and remove #13 plate & stem insert (set screws
aside). Tighten #28 base adapter bolt into umbrella base, then slide vertical adapter onto
base adapter bolt and tighten with 2 screws . Finally, slide #2 vertical corner (upright) post
onto vertical adapter and hand tighten knob. Repeat for each umbrella base.
Standard Mounting Set-Up:
Locate and attach #2 vertical
corner (upright) post onto #13
mounting plate. Tighten #12
knob. Repeat for each post.
Mounting and Application Options
Canopy Track Anchor
27
NOTE: Secure mounting plates when Pavilion assembly is complete.
Prepare mounting and set aside for later installation.
Loading...