Traulsen TR35787 User Manual

Project Quantity Item #

Model Specified: CSI Section 11400

G-Series Reach-In Refrigerators/

Self-Contained

Equipped with an
easy to use
microprocessor
control!

Model G20010

Model G30010

Model G10010

Standard Product Features

• High Quality Stainless Steel Exterior Front and Door(s)

• Corrosion Resistant Anodized Aluminum One-Piece Sides

• Durable Anodized Aluminum Interior

• Microprocessor Control With LED Temperature Readout

•Top-Mounted, Balanced, Self-Contained Refrigeration System

• Large High Humidity Evaporator Coil Outside The Food Zone

• Load-Sure Guard Protects Against Improper Loading

• Full or Half Length Stainless Steel Doors With Locks

• Self-Closing Doors With Stay Open Feature At 120 Degrees

• Guaranteed For Life Cam-Lift Hinges

• Guaranteed For Life Horizontal Work Flow Door Handle(s)

• Automatically Activated Incandescent Lights

• Damage Resistant Stainless Steel Breaker Caps

• Three (3) Adjustable Epoxy Coated Shelves Per Section,
Supported On Shelf Pins (installed at the factory)

• Energy Saving Automatic Non-Electric Condensate Evaporator

• Magnetic Snap-In Door Gaskets

• Gasket Protecting Anodized Aluminum Door Liner

• Anti-Condensate Door Perimeter Heaters

• Thermostatic Expansion Valve Metering Device Provides Quick
Refrigeration Recovery Times

• Stainless Steel One-Piece Louver Assembly

• 9' Cord & Plug Attached

• Set of Four (4) 6" High Casters With Locks

• One Year Parts And Labor Warranty

• Five Year Compressor Warranty

One, Two & Three Section Models, 32" Deep

Aside from their anodized aluminum side and interior finishes,

G

SERIES

Stainless Steel
Front & Door(s)

Traulsen’s G-Series "Dealer's Choice" models meet or exceed the
standard specifications and performance of most other brands top
tier product offerings. Reliable, energy efficient, and durable, with
large individual storage capacities, the high quality G-Series line-up
includes a wide range of one, two and three section reach-in
refrigerator and freezer models, built in our most popular footprints.
They are available with either full or half height doors, and the added
convenience of a variety of different door hingings to choose from. In
addition, each also includes a number of user-friendly features,
making them one of the best overall equipment values in Foodservice
today, and the right fit for nearly any commercial application.

AVAILABLE MODELS

Single Section Two Section Three Section

(Formerly Model GHT132WUT) (Formerly Model GHT232NUT) (Formerly Model GHT332NUT)

Model # Door Hinging Model # Door Hinging Model # Door Hinging

G10000 Half Right G20000 Half Left-Right G30000 Half Left-Right-Right
G10001 Half Left G20001 Half Right-Left G30001 Half Left-Left-Right
G10010 Full Right G20002 Half Right-Right G30002 Half Right-Right-Right
G10011 Full Left G20003 Half Left-Left G30003 Half Left-Left-Left

G20010 Full Left-Right G30010 Full Left-Right-Right
G20011 Full Right-Left G30011 Full Left-Left-Right
G20012 Full Right-Right G30012 Full Right-Right-Right
G20013 Full Left-Left G30013 Full Left-Left-Left

Optional Accessory Kits

• Additional Epoxy Coated Shelves*

• No. 1 Type Tray Slides* To Accommodate either: (1) 18" x
26" or (2) 14" x 18" Sheet Pans, Adjustable To 2" O.C.

• No. 4 Type Tray Slides* To Accommodate (1) 18" x 26" Sheet
Pans (equips one full section)

• Universal Type Tray Slides* To Accommodate Either (1) 18" x
26" or (2) 14" x 18" Sheet Pans, or (2) 12" x 20" Steam Table
Pans, Adjustable To 4" O.C.

• Chrome Plated Shelves* (for use in lieu of standard shelving)

• 6" High Adjustable Legs (for use in lieu of standard casters)

•Two Year Service/Labor Warranty Available

*Please refer to spec sheet 4-7 for

optional accessory kit details

NOTE: All optional accessory kits are shipped separately for

later installation by others at the jobsite.

All Traulsen G-Series solid door

reach-in refrigerator models

are E

NERGY STAR

for efficient operation!

®

listed

Listed by Underwriters Laboratories Inc., to
U.S. and Canadian safety standards and
Listed by NSF International.

TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE [phone] FAX-MKTG. 1 [phone]
Website: www.traulsen.com

Approval: __________________________________

SECTION

4-1

Project Quantity Item #

Model Specified: CSI Section 11400

Specifications

Construction, Hardware and Insulation

Cabinet exterior front, louver assembly and doors are constructed of 20 gauge
stainless steel. Cabinet sides (including returns), interior and door liners are
constructed of anodized aluminum. The exterior cabinet top, back and bottom are
constructed of heavy gauge aluminized steel. A set of four (4) 6" high casters are
included.

Doors are equipped with a gasket protecting metal door pan, removable plug
cylinder locks and guaranteed for life cam-lift, gravity action, self-closing metal, glide
hinges with stay open feature at 120 degrees. Hinges include a concealed switch to
automatically activate the interior incandescent lighting. Guaranteed for life, work
flow door handles are mounted horizontally over recess in door which limits
protrusion from door face into aisleways.

Easily removable for cleaning, vinyl magnetic door gasket assures tight door seal.
Anti condensate heaters are located behind each door opening.

Both the cabinet and door(s) are insulated with an average of 2" thick high density,
non-CFC, foamed in place polyurethane.

DIMENSIONAL DATA

1-Section Models 2-Section Models 3-Section Models

Net capacity cu. ft. 24.2 (686 cu l) 46.0 (1303 cu l) 69.1 (1958 cu l)
Length - overall in. 297⁄8 (75.9 cm) 521⁄8 (132.4 cm) 765⁄

16

(193.8 cm)
Depth - overall in. 35 (88.8 cm) 35 (88.8 cm) 35 (88.8 cm)
Depth - over body in. 32 (81.3 cm) 32 (81.3 cm) 32 (81.3 cm)
Depth - door open 90° in. 575⁄8 (146.3 cm) 575⁄8 (146.3 cm) 575⁄8 (146.3 cm)
Clear door width in. 211⁄8 (53.6 cm) 211⁄8 (53.6 cm) 211⁄8 (53.6 cm)
Clear half-door height in. 271⁄2 (69.9 cm) 271⁄2 (69.9 cm) 271⁄2 (69.9 cm)
Clear full-door height in. 575⁄8 (146.3 cm) 575⁄8 (146.3 cm) 575⁄8 (146.3 cm)
Height-overall on 6" casters

831⁄4 (211.5 cm) 831⁄4 (211.5 cm) 831⁄4 (211.5 cm)
No. Standard Shelves 3 6 9
Shelf area sq. ft.

1

18.8

(1.75 sq m)

34.6

(3.21 sq m)

51.9

(4.82 sq m)

ELECTRICAL DATA

Voltage 115/60/1 115/60/1 115/60/1
Feed wires with Ground 3 3 3
Full load amperes 4.7 7.3 11.8

REFRIGERATION DATA

Refrigerant R-134a R-134a R-134a
BTU/HR H.P.

2

1520 (1⁄4 HP) 2410 (1⁄3 HP) 3780 (1⁄2 HP)

SHIPPING DATA

Length - crated in. 35 (89 cm) 63 (160 cm) 91 (231 cm)
Depth - crated in. 43 (109 cm) 43 (109 cm) 43 (109 cm)
Height - crated in. 831⁄2 (212 cm) 831⁄2 (212 cm) 831⁄2 (212 cm)
Volume - crated cu. ft. 71 (2011 cu l) 131 (3711 cu l) 189 (5354 cu l)
Net Wt. lbs. 305 (138 kg) 450 (204 kg) 610 (277 kg)
Gross Wt. lbs. 395 (179 kg) 590 (268 kg) 790 (358 kg)

NOTE: Figures in parentheses reflect metric equivalents.
1= Figure shown reflects the area of standard shelf compliment plus the additional storage area available on

the cabinet bottom.

2= Based on a 90 degree F ambient and 20 degree F evaporator. For remote data please refer to spec sheet

13-2.

NOTES

Refrigeration System

A top mounted, self-contained, balanced refrigeration system using R-134a
refrigerant is conveniently located behind the one piece louver assembly. It features
an easy to clean front facing condenser, thermostatic expansion valve, air-cooled
hermetic compressor, large, high humidity evaporator coil located outside the food
zone and a top mounted non-electric condensate evaporator. A 9' cord and plug is
provided. Standard operating temperature is 34 to 38°F.

Controller

The easy to use water resistant microprocessor control system is supplied standard.
It includes a 3-Digit LED Display, and a Fahrenheit or Celsius Temperature Scale
Display Capability.

Interior

Standard interior arrangements include three (3) epoxy coated wire shelves per
section, mounted on shelf pins, installed at the factory. Shelves are full-width, and
do not have any large gaps between them requiring the use of "bridge" or "junior
shelves." Recommended load limit per shelf should not exceed 225 lbs.

Warranties

Both a one year parts and labor warranty and a five year compressor warranty (self­contained models only) are provided standard. An optional 2
and labor warranty is also available.

Elevation

One-Section

Elevation

Two-Section

Plan - One-Section

nd

year extended parts

Elevation

Three-Section

Plan - Two-Section

Equipped With One NEMA 5-15 P Plug

In order to assure optimum performance, the condensing unit MUST have an adequate supply of
air for cooling purposes. Therefore, the operating location must either have a minimum of 12”
clearance overhead of the condensing unit or allow for unrestricted air flow at the back of the unit.
Clearance of at least 12” above is required in order to perform certain maintenance tasks.

NOTE: When ordering please specify: Voltage, Hinging, Door Size, Options and any
additional warranties.

Continued product development may necessitate specification changes without notice.
Part No. TR35787 (revised 06/08)

SECTION

4-1

REQUIRED CLEARANCES

TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE [phone] FAX-MKTG. 1 [phone]
Website: www.traulsen.com

Plan - Three-Section

Section - All Models