• Drawers To Accommodate 12"x20"x6" Pans (pans by others)
• Self-Closing Drawers With Stay Open Feature
• 14-Gauge Stainless Steel Drawer Slide
• 2" Diameter Stainless Steel Drawer Rollers
• Side, Front & Rear Access Panel For Ease Of Service & Maintenance
• NEMA 5-15P Plug With 9' Cord & Cord Retainer
• 4" High Casters Mounted in Adjustable Channel System
• One Year Parts And Labor Warranty
• Two Year Control Warranty (parts and labor)
• Five Year Compressor Warranty
• Three Year Drawer Parts Warranty
Two, Four, Six & Eight Drawer Models, 34" Deep
2-Drawer Model TE036HT, TE048HT & TE060HT
TE
SERIES
Like everything in the Traulsen line, our Equipment Stands are heavy duty. They
feature a stainless steel Marine Edge top as standard and it's durable cabinet
design is engineered to suppor t the heavy equipment used along the cook
line. Ideal for use as a base with broilers, ovens, fryers or griddles. In addition,
our sturdy drawer design, which comes standard with 2" inch stainless steel
drawer rollers, can accommodate 6" inch deep pans in every drawer. Also, our
drawer design offers the maximum length and pan capacity in the market today.
Traulsen Equipment Stands also come equipped with our reliable, plug and
play INTELA-TRAULR microprocessor control for precise temperature maintenance. Equip ped with a balanced, self -contained refrigeratio n system,
keeping its cool no matter what the temperature in the surrounding area
is. Even when tested under extreme conditions, the cabinets' dedicated
evaporator fan design continues to distribute air through each drawer section. That's
4-Drawer Model TE065HT, TE072HT & TE084HT
6-Drawer Model TE096HT, TE110HT & TE125HT
8-Drawer Model TE139HT
Trusted refrigeration equipment you can rely on all day, every day.
Options & Accessories
• Set Of 6" High Stainless Steel Legs In Lieu Of Casters
• 6" Cabinet Length Extension
• Stainless Steel Exterior Finished Back
• NAFEM Data Protocol (NDP) Gateway Package
• 220/50/1 Voltage
• Remote Applications (see spec sheet 12-2 for more details)
• Refrigeration Relocated to Right
Equipped With One NEMA 5-15P Plug
Listed by Underwriters Laboratories Inc., to
U.S. and Canadian safety standards and Listed
by NSF International.
Approval: ______________________________________
TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
www.traulsen.com
E-Mail: deb.hughes@hobartcorp.com
SECTION
2-3
Page 2
54.313
36
54.313
48
54.313
60
54.313
36
54.313
48
54.313
60
54.313
48
54.313
60
54.313
48
54.313
60
54.313
60
54.313
60
54.313
48
54.313
60
54.313
65
54.313
48
54.313
60
54.313
65
54.313
34
26
22
32
Project Quantity Item #
Model Specified: CSI Section 11400
TE036HT 2-Pan Model
54.12554.125
TE048HT 4-Pan Model TE060HT 6-Pan Model TE065HT 6-Pan Model
54.125
DIMENSIONAL DATA TE036HT TE048HT TE060HT TE065HT
Side-by-Side Pan Conguration Side-by-Side Pan Conguration Side-by-Side Pan Conguration Side-by-Side Pan Conguration
Gross Weight-Crated lbs. 410 (186.0 kg) 430 (195.0 kg) 475 (215.5 kg) 510 (231.3 kg)
Section View
All Models
NOTES
1=Based on a 900 degree F ambient and 200 degree F evaporator.
2=For approximate remote weights deduct 40 lbs. from respective gross weight.
For other information on remote models, please refer to spec sheet 12-2.
3=Each drawer is rated at 75 pounds.
NOTE: Freight charges are FOB destination for
dock to dock delivery within the continental
USA. Liftgate delivery charges are additional.
For inside delive ry ch arges, please consult
factory.
NOTE: When ordering please specify: Voltage, Hinging, Options and any additional
warranties.
Continued product development may necessitate specication changes without notice.
Part No. TR35882 (revised 9/07)
Construction, Hardware and Insulation
Cabinet exterior, front and sides, louver assembly and drawers are constructed of 20 Gauge 430 Stainless
Steel, exterior back and bottom are constructed of heavy gauge galvanized steel. Drip Guard (Marine Edge)
Top, is constructed of 16 Gauge 300 Series stainless steel. Cabinet interior, walls is constructed of 22 gauge
400 series stainless steel, top and bottom are constructed of 22 gauge 300 series stainless steel. A set of 4"
high casters are included standard. Vinyl magnetic snap-in drawer gasket assures tight drawer seal and easily
removable for cleaning. Anti condensate heaters are located behind each drawer opening. Both the cabinet
and drawers are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.
Drawers
Each heav y-duty draw er i s de signed to accommo date 12"x20"x 6" i nch deep pans. Th e dr awers
thems elves are constr ucted using 14 gaug e st ainless stee l dr awer slides and 2" diame ter stainless steel rollers. To facilitate use, each d rawer in cludes both a self-c losing and st ay open feature.
Refrigeration System
Self-contained, balanced refrigeration system using R-404A refrigerant comes standard with left hand refrigeration placement. It features an off-cycle defrost, capillary tube, air-cooled hermetic compressor, and an automatic condensate evaporator. A NEMA 5-15P plug and 9' cord and retainer is provided. Cabinet operating temperature is 34 to 38°F. Dedicated rear mount evaporator fan design distributes air through each drawer section.
Controller
The easy to use water res istant INTE LA-TRAULR micropro cessor contr ol s ystem is suppli ed s tandard . U nit is NAF EM Data Prot ocol com munica tion (ND P) ready. Opti onal har dware req uired
to be N DP comp liant . Th ird par ty sof twar e requi red for n etwo rk conn ecti on. It inc lude s a
3-Di git LED Disp lay, Fahrenhe it or Celsius Tempe rature Sca le Displa y Ca pabili ty, and an RS485
dat a p ort. In ad ditio n it inclu des aud io/vi sual al arms for : Hi/Lo Ca binet Temp eratu re, Clea n
Con dens er, Evap orato r Coil, Di scha rge Lin e Sens or Failu res, an d Power Su pply i nterr upti on.
Warranties
Both a one (1) year parts and labor warranty and a five (5) year compressor warranty (self-contained
models only) are provided standard. The INTELA-TRAUL
and labor warranty. Drawer (s) come with a three (3) year parts only warranty (excluding gaskets).
Specications
R
control is warranted by a two (2) year parts
TRAULSEN
SECTION
2-3
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
E-Mail: deb.hughes@hobartcorp.com
www.traulsen.com
54.125
Page 3
72.000
54.313
84
54.313
54.313
84
54.313
96
54.563
84
54.313
54.313
84
54.313
96
54.563
54.313
34
26
22
32
72.000
54.313
Project Quantity Item #
Model Specified: CSI Section 11400
TE072HT 8-Pan Model
54.125
TE084HT 8-Pan Model
TE096HT 12-Pan Model
54.125
DIMENSIONAL DATA TE072HT TE084HT TE096HT
Front-to-Back Pan Conguration Side-by-Side Pan Conguration Front-to-Back Pan Conguration
Length Overall in. 72 (182.9 cm 84 (213.4 cm) 96 (243.8 cm)
Depth-Cabinet Only in. 32 (81.3 cm) 32 (81.3 cm) 32 (81.3 cm)
Depth-with Drawer Open in. 54 1/8 (137.5 cm) 54 1/8 (137.5 cm) 54 1/8 (137.5 cm)
Height-Overall on 4" Casters in. 26 (66.0 cm) 26 (66.0 cm) 26 (66.0 cm)
Maximum Top Load Capacity lbs. 1200 1500 1500
Pan Capacity 12"x20"x6" in. 8 8 12
Drawers Per Cabinet3 4 4 6
ELECTRICAL DATA
Voltage 115/60/1 115/60/1 115/60/1
Feed Wires with Ground NEMA 5-15P NEMA 5-15P NEMA 5-15P
Full Load Amperes 6.7 6.7 12
REFRIGERATION DATA
Refrigerant R-404a R-404a R-404a
BTU/HR-HP
WEIGHT DATA
1
2
2440 (1/3HP) 2440 (1/3HP) 4090 (1/2HP)
Gross Weight-Crated lbs. 555 (251.7 kg) 655 (297.1 kg) 760 (344.7 kg)
Section View
All Models
NOTES
1=Based on a 900 degree F ambient and 200 degree F evaporator.
2=For approximate remote weights deduct 40 lbs. from respective gross weight.
For other information on remote models, please refer to spec sheet 12-2.
3=Each drawer is rated at 75 pounds.
NOTE: Freight charges are FOB destination for
dock to dock delivery within the continental
USA. Liftgate delivery charges are additional.
For inside delive ry ch arges, please consult
factory.
NOTE: When ordering please specify: Voltage, Hinging, Options and any additional
warranties.
Continued product development may necessitate specication changes without notice.
Part No. TR35882 (revised 9/07)
Construction, Hardware and Insulation
Cabinet exterior, front and sides, louver assembly and drawers are constructed of 20 Gauge 430 Stainless
Steel, exterior back and bottom are constructed of heavy gauge galvanized steel. Drip Guard (Marine Edge)
Top, is constructed of 16 Gauge 300 Series stainless steel. Cabinet interior, walls is constructed of 22 gauge
400 series stainless steel, top and bottom are constructed of 22 gauge 300 series stainless steel. A set of 4"
high casters are included standard. Vinyl magnetic snap-in drawer gasket assures tight drawer seal and easily
removable for cleaning. Anti condensate heaters are located behind each drawer opening. Both the cabinet
and drawers are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.
Drawers
Each heav y-duty drawer is design ed to acco mmodate 12"x20 "x6" inch deep pans. Th e dra wers
thems elves are construc ted using 14 gauge stainle ss s teel drawer slides and 2" diame ter s tainless steel rollers. To facilitate use, each dr awer inclu des both a self-closing and stay open fea ture.
Refrigeration System
Self-contained, balanced refrigeration system using R-404A refrigerant comes standard with left hand refrigeration placement. It features an off-cycle defrost, capillary tube, air-cooled hermetic compressor, and an automatic condensate evaporator. A NEMA 5-15P plug and 9' cord and retainer is provided. Cabinet operating temperature is 34 to 38°F. Dedicated rear mount evaporator fan design distributes air through each drawer section.
Controller
The easy to use water resis tant INTELA-TRAU LR microproc essor control syst em i s sup plied standard . U nit is NAFEM Da ta Protoco l commun icatio n ( NDP) read y. Opt ional har dware requ ired
to be ND P compl iant. Thi rd part y softw are req uired fo r netwo rk conn ecti on. It inc ludes a
3-Di git LED Displa y, Fah renheit or Cels ius Tempe rature Scal e D isplay Capa bility, and an RS4 85
dat a p ort. In add ition it in clude s audio/ visua l alarm s f or: Hi/L o C abine t Tem peratu re, Clea n
Con dense r, Evapo rator Co il, Dis charg e L ine Sen sor Fail ures, a nd Power S upply in terr uptio n.
Warranties
Both a one (1) year parts and labor warranty and a five (5) year compressor warranty (self-contained
models only) are provided standard. The INTELA-TRAUL
and labor warranty. Drawer (s) come with a three (3) year parts only warranty (excluding gaskets).
Specications
R
control is warranted by a two (2) year parts
TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
E-Mail: deb.hughes@hobartcorp.com
www.traulsen.com
SECTION
2-3
54.125
Page 4
54.313
110
54.313
125
54.313
110
54.313
125
54.313
125
54.313
125
54.313
54.313
125
54.313
139
54.313
54.313
125
54.313
139
34
26
22
54.313
34
26
22
32
Project Quantity Item #
Model Specified: CSI Section 11400
TE110HT 12-Pan Model
54.125
TE125HT 14-Pan Model
54.125
TE139HT 16-Pan Model
DIMENSIONAL DATA TE110HT TE125HT TE139HT
Side-by-Side Pan Conguration Side-by-Side Pan Conguration Side-by-Side Pan Conguration
Length Overall in. 110 (279.4 cm 125 (317.5 cm) 139 (353.1 cm)
Depth-Cabinet Only in. 32 (81.3 cm) 32 (81.3 cm) 32 (81.3 cm)
Depth-with Drawer Open in. 54 1/8 (137.5 cm) 54 1/8 (137.5 cm) 54 1/8 (137.5 cm)
Height-Overall on 4" Casters in. 26 (66.0 cm) 26 (66.0 cm) 26 (66.0 cm)
Maximum Top Load Capacity lbs. 1500 2000 2000
Pan Capacity 12"x20"x6" in. 12 14 16
Drawers Per Cabinet3 6 6 8
ELECTRICAL DATA
Voltage 115/60/1 115/60/1 115/60/1
Feed Wires with Ground NEMA 5-15P NEMA 5-15P NEMA 5-15P
Full Load Amperes 12 12 12
REFRIGERATION DATA
Refrigerant R-404a R-404a R-404a
BTU/HR-HP
WEIGHT DATA
1
2
4090 (1/2HP) 4090 (1/2HP) 4090 (1/2HP)
Gross Weight-Crated lbs. 845 (383.3 kg) 885 (401.4 kg) 925 (419.6 kg)
NOTES
1=Based on a 900 degree F ambient and 200 degree F evaporator.
2=For approximate remote weights deduct 40 lbs. from respective gross weight.
For other information on remote models, please refer to spec sheet 12-2.
3=Each drawer is rated at 75 pounds.
NOTE: Freight charges are FOB destination for
dock to dock delivery within the continental
USA. Liftgate delivery charges are additional.
For inside delive ry ch arges, please consult
factory.
NOTE: When ordering please specify: Voltage, Hinging, Options and any additional
warranties.
Continued product development may necessitate specication changes without notice.
Part No. TR35882 (revised 9/07)
SECTION
2-3
TRAULSEN
4401 BLUE MOUND RD. FT. WORTH, TX 76106
PHONE 1 (800) 825-8220 FAX-MKTG. 1 (817) 624-4302
E-Mail: deb.hughes@hobartcorp.com
www.traulsen.com
Section View
All Models
Construction, Hardware and Insulation
Cabinet exterior, front and sides, louver assembly and drawers are constructed of 20 Gauge 430 Stainless
Steel, exterior back and bottom are constructed of heavy gauge galvanized steel. Drip Guard (Marine Edge)
Top, is constructed of 16 Gauge 300 Series stainless steel. Cabinet interior, walls are constructed of 22 gauge
400 series stainless steel, top and bottom are constructed of 22 gauge 300 series stainless steel. A set of 4"
high casters are included standard. Vinyl magnetic snap-in drawer gasket assures tight drawer seal and easily
removable for cleaning. Anti condensate heaters are located behind each drawer opening. Both the cabinet
and drawers are insulated with an average of 2" thick high density, non-CFC, foamed in place polyurethane.
Drawers
Each heav y-duty drawer is design ed to acco mmodate 12"x20 "x6" inch deep pans. Th e dra wers
thems elves are construc ted using 14 gauge stainle ss s teel drawer slides and 2" diame ter s tainless steel rollers. To facilitate use, each dr awer inclu des both a self-closing and stay open fea ture.
Refrigeration System
Self-contained, balanced refrigeration system using R-404A refrigerant comes standard with left hand refrigeration placement. It features an off-cycle defrost, capillary tube, air-cooled hermetic compressor, and an automatic condensate evaporator. A NEMA 5-15P plug and 9' cord and retainer is provided. Cabinet operating temperature is 34 to 38°F. Dedicated rear mount evaporator fan design distributes air through each drawer section.
Controller
The easy to use water resis tant INTELA-TRAU LR microproc essor control syst em i s sup plied standard . U nit is NAFEM Da ta Protoco l commun icatio n ( NDP) read y. Opt ional har dware requ ired
to be ND P compl iant. Thi rd part y softw are req uired fo r netwo rk conn ecti on. It inc ludes a
3-Di git LED Displa y, Fah renheit or Cels ius Tempe rature Scal e D isplay Capa bility, and an RS4 85
dat a p ort. In add ition it in clude s audio/ visua l alarm s f or: Hi/L o C abine t Tem peratu re, Clea n
Con dense r, Evapo rator Co il, Dis charg e L ine Sen sor Fail ures, a nd Power S upply in terr uptio n.
Warranties
Both a one (1) year parts and labor warranty and a five (5) year compressor warranty (self-contained
models only) are provided standard. The INTELA-TRAUL
and labor warranty. Drawer (s) come with a three (3) year parts only warranty (excluding gaskets).
Specications
R
control is warranted by a two (2) year parts
54.125
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.