Traditions BP6000 User Manual

314 BLANK PISTOL MODEL BP6000
L
OADING, SHOOTING & CARE INSTRUCTIONS
WARNING
This blank pistol is chambered to fire only crimped 6mm caliber blank cartridges. This pistol is not to be used with any loaded ammunition containing any type of projectile nor with any powder activated fastening devices. Damage to mechanism caused by shooting without blank cartridge in the chambers will not be covered under warranty.
TO LOAD
T
O SHOOT
This pistol will fire in double or single action or single action. To fire the pistol in single action, pull hammer back to lock in down position. When ready to fire, pull trigger. To fire in double action, simply pull trigger with hammer in the “at-rest”or forward posi­tion. (Note: The double action trigger will have a heavier trigger pull than single action.)
T
O REMOVE
CARTRIDGES
Pull out the ejector rod assembly and lower the cylinder out of the frame. Push on the ejector rod to expose the cartridges and pull out.
CARE OF GUN
For dependable service, the gun must be cleaned and oiled periodically and always after each use. Remove powder and dust traces from gun and cylinder chambers and place a drop of oil on all moveable parts. Apply the same oil to a soft cloth and wipe outside of gun for protection against rust.
WARRANTY
One (1) year limited warranty. You will need to retain an original purchase receipt to validate your warranty.
PARTS LIST
1. Frame
2. Hammer
3. Trigger
4. Swing-out lever
5. Ejector rod assembly
6. Sear
7. Firing pin assembly
8. Cylinder
9. Hammer spring
10. Trigger spring
11. Sear spring
12. Grips
1375 Boston Post Road • P.O. Box 776 • Old Saybrook, CT 06475 • TEL: 860-388-4656 • FAX: 860-388-4657
www.traditionsfirearms.com
W ARNING
ALWAYS WEAR SAFETY GLASSES AND HEARING PROTECTION
HANDLE THIS BLANK REVOLVER AS YOU WOULD ANY FIREARM
KEEP OUT OF REACH OF CHILDREN
NEVER AIM AT APERSON OR ANIMAL
1/03 - 6000I
5
4
10
3
11
6
12
1
2
7
8
9
BP6000
314 STARTER BLANK GUN
6mm Caliber, 8 Shot Blank Revolver
(6mm crimped blanks only)
Made in Italy
Loading...