Please note that features of Deco may vary slightly depending on the model and software version you have, and on your location, language and internet
service provider. All images, parameters and descriptions documented in this guide are used for demonstration only.
Con
ventions
In this guide
Convention Description
Deco
Underline
Teal
ovides a brief introduction to Deco Smart Whole-Home Wi-Fi System and the Deco app, as well as regulatory information.
Mor
e Info
, the following conventions are used:
S
tands for Deco Smart Whole-Home Wi-Fi System/Unit.
ote:
N
Tips:
Hyperlink
redirect to a website or a specic section.
K
ey information appears in teal, including management
page text such as menus, items, buttons and so on.
Ignoring this t
or damage to the device.
dicates important information that helps you make
In
better use of your device.
s are in teal and underlined. You can click to
ype of note might result in a malfunction
• Specific pr
http://www.tp-link.com
A
•
Technical Support Forum is provided for you to discuss our
products at http://forum.tp-link.com.
Our
•
Technical Support contact information can be found at the Help
center of the Deco app and the Contact Technical Support page at
http://www.tp-link.com/support.
oduct information can be found on the product page at
.
Set Up Y
F
ollow the steps below to set up your Deco Whole-Home Wi-Fi system.
our Deco
1. Download and install the Deco app
Scan the QR code below or go to Google Play
or the Apple App Store to download the Deco
app.
Install the app on your Android or iOS
smartphone or tablet.
or
og in or sign up with TP-Link ID
2. L
Open the app. Use your TP-Link ID to log in.
If you don’t have a TP-Link ID, tap Sign Up. The
Deco app will guide you through the rest.
3. Connect y
Find and power o your modem. Connect your
Deco to the modem and power them both on.
If you don't have a modem, connect the
Ethernet outlet directly to your Deco.
our modem to Deco
2
Set Up Y
F
ollow the steps below to set up your Deco Whole-Home Wi-Fi system.
our Deco
4. Select a location
Select a location for this Deco. If its location
is not listed, you can create a new one by
choosing Custom.
eate your Wi-Fi network
5. Cr
Set a network name and a password. These
will be the name and password you use to
connect your devices to Wi-Fi.
dd more Decos
6. A
You can add more Decos to expand Wi-Fi
coverage. The app will guide you through the
process of adding more Decos one by one.
3
Dashboard
After you successfully set up your Deco network, you will see the dashboard of the Deco app. Here you can view the working status of all Decos, test
the internet speed, check the connected devices and manage your network.
Deco Status, Speed Test & Devices
Swipe RightTap the Main Menu
4
Wi-Fi Settings
Customize the network name and password of your main network or create a separate network just for guests. You can set a guest network name and
an easy-to-remember password. You can shake your device to share the network details easily with family and friends.
Enable Guest Network
Create Network Name and PasswordShake to Share
5
Parental Controls
Create proles for family members and specify the devices that belong to each. Set individualized parental controls including when and for how long
each person can access the internet. Block inappropriate content and pause the internet if necessary.
Insights
Filter LevelTime Controls
6
Antivirus
There are three ways Deco ensures your home network remains safe: by blocking malicious websites, by protecting the system and applications
against external attacks and eliminating vulnerabilities, and by preventing infected devices from sending sensitive information outside your network.
Protection Enabled
Alert HistoryProtection Disabled
7
QoS
There are two ways to use the QoS (Quality of Service) function. You can prioritize the connection of a particular device for a set duration, such as a
family member's laptop for one hour during a video call. You can also prioritize the online activity that's most important to the whole family, such as
Streaming or Gaming.
Prioritize a Device
Prioritize an ActivityCustomize
8
Advanced Features
Additional features are available under the Advanced menu. Modify WAN settings (IPv4 & IPv6), control Deco's LED and turn notications o and on.
IPv4
IPv6LED Control
9
Online Upgrade
TP-Link is dedicated to improving product features and providing a better customer experience. Update Deco when prompted in the Deco app.
Update Available
Updating DecoUp-to-date
10
Managers
Add friends and family members to help manage your network. Each manager should have their own TP-Link ID.
Add as Manager
Manager ListRemove a Manager
11
Authentication
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product
names are trademarks or registered trademarks of their respective holders.
This equipment has been t
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
This de
2.
This de
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
vice may not cause harmful interference.
vice must accept any interference received, including interference that may cause undesired operation.
ested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
F
CC RF Radiation Exposure Statement
This equipment c
co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this
transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction
with any other antenna or transmitter.”
CE Mark W
omplies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be
arning
13
This is a class B pr
adequate measures.
xposure Information
RF E
oduct. In a domestic environment, this product may cause radio interference, in which case the user may be required to take
This de
of health protection.
The device complies with RF specifications when the device used at 20 cm from your body.
Restricted to indoor use.
Canadian Complianc
This de
1.
2.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux
deux conditions suivantes :
1.
2.
vice meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way
e Statement
vice complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
This de
This de
l’appar
l’utilisat
vice may not cause interference, and
vice must accept any interference, including interference that may cause undesired operation of the device.
eil ne doit pas produire de brouillage;
eur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement
Caution:
1. The de
satellite systems;
vice for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile
vertissement:
A
1. Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de réduire les risques de
brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
14
Radiation E
xposure Statement:
This equipment c
with minimum distance 20cm between the radiator & your body.
Déclar
Cet équipement est c
installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Industr
AN ICES-3 (B)/NMB-3(B)
C
K
orea Warning Statements:
당해 무선설비는 운용중 전파혼신 가능성이 있음.
ation d’exposition aux radiations:
y Canada Statement
NCC Notic
omplies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated
onforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être
дукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що
Про
передбачені чинними законодавчими актами України.
Saf
ety Information
When pr
•
completely shut off power is to disconnect the product or the power adapter from the power source.
Don
•
please contact us.
A
•
void water and wet locations.
oduct has power button, the power button is one of the ways to shut off the product; when there is no power button, the only way to
’t disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service,
A
•
dapter shall be installed near the equipment and shall be easily accessible.
Us
•
e only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please don't
hesitate to contact us.
For EU/EFTA, this product can be used in the following countries:
ATBEBGCH CYCZDEDK
EEELESFIFRHRHUIE
ISITLILTLULVMTNL
NOPLPTROSESISKUK
16
E
xplanation of the symbols on the product label
ymbolExplanation
S
DC v
oltage
YCLING
REC
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to
European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.
17
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.