TP Link M5V3 Users Manual

Whole Home Mesh Wi-Fi System
Seamless Roaming | Parental Controls | Antivirus
User Guide
AC1300 Whole Home Mesh Wi-Fi System
Deco M5
1910012596 REV2.1.0
Contents
About This Guide ···················································· 1 Appearance ······························································· 2 Set Up Your Deco ··················································· 3 Dashboard ·································································· 5 Overview ······································································ 6 Shortcut ······································································· 8 Automation ································································· 9 Wi-Fi Settings··························································10 Internet Speed Test ·············································11 Blacklist ······································································12 WPS ··············································································13 Parental Controls ··················································14 Antivirus ·····································································15 QoS···············································································16 Monthly Report ······················································17 Managers ··································································18 Advanced Features ·············································19 Online Upgrade ······················································24 Authentication ························································25
About This Guide
This guide provides a brief introduction to Deco Whole Home Mesh Wi-Fi System and the Deco app, as well as regulatory information.
Please note that features of Deco may vary slightly depending on the model and software version you have, and on your location, language and internet service provider. All images, parameters and descriptions documented in this guide are used for demonstration only.
Conventions
In this guide, the following conventions are used:
Convention Description
Deco
Underline
Teal
Note:
Tips:
Stands for Deco Whole Home Mesh Wi-Fi System/Unit.
Hyperlinks are in teal and underlined. You can click to redirect to a website or a speciƮc section.
Key information appears in teal, including management page text such as menus, items, buttons and so on.
Ignoring this type of note might result in a malfunction or damage to the device.
Indicates important information that helps you make better use of your device.
More Info
• Specific product information can be found on the product page at
https://www.tp-link.com.
• A community is provided for you to discuss our products at
https://community.tp-link.com.
Speed/Coverage/Device Quantity Disclaimer
Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range, coverage, and maximum quantity of connected devices are based on test results under normal usage conditions. Actual wireless data throughput. wireless coverage, and quantity of connected devices are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) client limitations, including rated performance, location, connection quality, and client condition.
HomeCare Disclaimer
A basic TP-Link HomeCareTM, powered by Trend MicroTM, package is included for 3 years from date of activation at no additional cost. It includes Parental controls, Quality of Service, and Antivirus. Deactivation of HomeCareTM will disable certain controls and protections. For a complete list of HomeCareTM functions, go to www.tp-link.com.
IoT Compatibility Disclaimer
IoT compatibility refers only to smart devices that can be controlled via the Deco app. Other wireless devices can still connect to Deco for normal Wi-Fi use.
• Our Technical Support contact information can be found at the Help center of the Deco app and the Contact Technical Support page at
https://www.tp-link.com/support/.
Seamless Roaming Disclaimer
Clients need to support 802.11k/v/r and may require additional set up. Performance may vary depending on the client device.
Appearance
Each Deco has an LED that changes color according to its status, two RJ-45 Ethernet ports and a power slot. See the explanation below:
Yellow pulse:
Deco is resetting.
Yellow solid:
Deco is starting up.
Blue pulse:
Deco is ready for setup.
Blue solid:
Deco is setting up.
Ethernet ports: For connecting Deco to your modem, the Ethernet outlet or other internet devices.
Green pulse:
Deco is upgrading Ʈrmware.
Green solid:
Deco is registered and all is well.
Red pulse:
Deco is disconnected from main Deco.
Red solid:
Deco has an issue.
Reset button: Press to reset Deco to factory default settings.
Power slot: For connecting Deco to the power socket via the provided power adapter.
2
Set Up Your Deco
Follow the steps below to set up your Deco Whole Home Mesh Wi-Fi system.
1. Download and install the Deco app
Scan the QR code below or go to Google Play or the Apple App Store to download the Deco app.
Install the app on your Android or iOS smartphone or tablet.
or
2. Log in or sign up with TP-Link ID
Open the app. Use your TP-Link ID to log in.
If you don’t have a TP-Link ID, tap SIGN UP. The Deco app will guide you through the rest.
3. Connect your modem to Deco
Find and power oƬ your modem. Connect your Deco to the modem and power them both on.
If you don't have a modem, connect the Ethernet outlet directly to your Deco.
3
Set Up Your Deco
Follow the steps below to set up your Deco Whole Home Mesh Wi-Fi system.
4. Select a location
Select a location for this Deco. If its location is not listed, you can create a new one by choosing Custom.
5. Create your Wi-Fi network
Set a network name and a password. These will be the name and password you use to connect your devices to Wi-Fi.
6. Add more Decos
You can add more Decos to expand Wi-Fi coverage. The app will guide you through the process of adding more Decos one by one.
4
Dashboard
After you successfully set up your Deco network, you will see the dashboard of the Deco app. Here you can get an overview of the network status, create shortcut and automation, and set up various advanced features.
Click
to enter OVERVIEW Click to enter SHORTCUT Click to enter AUTOMATION Click to set up more features
5
Overview
In Overview, you can check the working status of all the Decos, manage the connected devices, add smart devices, use friends of Deco, and more.
Click
to enter OVERVIEW
Swipe right to open the menu
Tap > Smart Devices to add smart devices
6
Overview
In Overview, you can check the working status of all the Decos, manage the connected devices, add smart devices, use friends of Deco, and more.
Click
to check Deco status
Select a connected device to view the detailsSelect a Deco to view the details
7
Shortcut
With the tap of an icon, execute a shortcut you created.
Click
to enter SHORTCUT
Add actions Create shortcuts Tap to execute the shortcut
8
Automation
Automation allows you to set interactions between your smart devices by adding triggers and actions. For example, if the bedroom light comes on (which is a trigger), and then the air conditioner in the bedroom will start running (which is an action).
Click to enter AUTOMATION
Add triggers
Add actions Manage the automation
9
Wi-Fi Settings
Customize the network name and password of your main network or create a separate network just for guests. You can shake your device to share the network details easily with family and friends.
Click > Wi-Fi
Create network name and password
Enable guest network Shake to share your network
10
Internet Speed Test
Test your internet speed to see what you can do on your network. You will get an internet speed rating report after the test.
Click TEST to start testing
Get speed test report
Click to check speed test historyClick > Test Internet Speed
11
Blacklist
Compile a blacklist to avoid devices added on the blacklist to access to your network, ensuring the safety of your personal information shared in the network.
Click > Blacklist
Add clients to blacklist
Add devices to blacklist Manage blacklist
12
WPS
Easily connect a client to the network by turning on WPS for a nearby Deco and then for the client.
Click > WPS
Click the WPS icon on Deco app and then on the client
WPS connecting icon on Deco app anSuccessfully connected to the
network
13
Parental Controls
Create proƮles for family members and specify the devices that belong to each. Set individualized parental controls including when and for how long each person can access the internet. Block inappropriate content and pause the internet if necessary.
Click > Parental Controls
Add new proƮle
Set Ʈlter level Set time controls
14
Antivirus
There are three ways Deco ensures your home network remains safe: by blocking malicious websites, by protecting your home network and applications against external attacks and eliminating vulnerabilities, and by preventing infected devices from sending sensitive information or security threats to clients outside your network.
Click > Antivirus
Protection enabled
Click to view antivirus history
Protection disabled
15
QoS
There are two ways to use the QoS (Quality of Service) function. You can prioritize the connection of a particular device for a set duration, such as a family member's laptop for one hour during a video call. You can also prioritize the online activity that's most important to the whole family, such as Streaming or Gaming.
Click > QoS
Prioritize an online activity
Prioritize devices Customize application priority
16
Monthly Report
Review a monthly list of usage, such as security threats, top 5 visited contents, most frequently executed shortcuts and automations, and more.
Click > Monthly Report
View monthly reports
Enable or disable monthly report Clear monthly report data
17
Managers
Add friends and family members to help manage your network. Each manager should have their own TP-Link ID.
Click > Managers
Add as manager
Manage manager listSet privileges for managers
18
Advanced Features
Additional features are available under the Advanced menu. You can modify WAN settings (IPv4 IPv6), add IPv6 Ʈrewall rules, modify LAN IP, set up DHCP server, enable VLAN/IPTV/MAC Clone mode, reserve the same IP address for a speciƮc device, set up port forwarding rules to make your local computers accessible to other devices over the internet, enable TP-Link DDNS, SIP ALG, fast roaming and beamforming, control Deco's LED, change the working mode, and conƮgure the notiƮcation settings.
Click > Advanced
View IPv4 details
Enable IPv6 Add IPv6 Ʈrewall rules
19
Advanced Features
Additional features are available under the Advanced menu. You can modify WAN settings (IPv4 IPv6), add IPv6 Ʈrewall rules, modify LAN IP, set up DHCP server, enable VLAN/IPTV/MAC Clone mode, reserve the same IP address for a speciƮc device, set up port forwarding rules to make your local computers accessible to other devices over the internet, enable TP-Link DDNS, SIP ALG, fast roaming and beamforming, control Deco's LED, change the working mode, and conƮgure the notiƮcation settings.
Modify LAN IP
Set DHCP server Enable VLAN mode
Enable IPTV mode
20
Advanced Features
Additional features are available under the Advanced menu. You can modify WAN settings (IPv4 IPv6), add IPv6 Ʈrewall rules, modify LAN IP, set up DHCP server, enable VLAN/IPTV/MAC Clone mode, reserve the same IP address for a speciƮc device, set up port forwarding rules to make your local computers accessible to other devices over the internet, enable TP-Link DDNS, SIP ALG, fast roaming and beamforming, control Deco's LED, change the working mode, and conƮgure the notiƮcation settings.
Enable MAC Clone
Reserve IP addresses for specific devices
Set up port forwarding rules
Register a TP-Link DDNS domain name
21
Advanced Features
Additional features are available under the Advanced menu. You can modify WAN settings (IPv4 IPv6), add IPv6 Ʈrewall rules, modify LAN IP, set up DHCP server, enable VLAN/IPTV/MAC Clone mode, reserve the same IP address for a speciƮc device, set up port forwarding rules to make your local computers accessible to other devices over the internet, enable TP-Link DDNS, SIP ALG, fast roaming and beamforming, control Deco's LED, change the working mode, and conƮgure the notiƮcation settings.
Enable SIP ALG Enable Beamforming Enable LED controls
Enable Fast Roaming
22
Advanced Features
Additional features are available under the Advanced menu. You can modify WAN settings (IPv4 IPv6), add IPv6 Ʈrewall rules, modify LAN IP, set up DHCP server, enable VLAN/IPTV/MAC Clone mode, reserve the same IP address for a speciƮc device, set up port forwarding rules to make your local computers accessible to other devices over the internet, enable TP-Link DDNS, SIP ALG, fast roaming and beamforming, control Deco's LED, change the working mode, and conƮgure the notiƮcation settings.
Change the operating mode
Set notiƮcations
23
Online Upgrade
TP-Link is dedicated to improving product features and providing a better customer experience. Update Deco when prompted in the Deco app.
Click > Update Deco
Update available
Updating Deco Deco is up-to-date
24
Authentication
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2019 TP-Link Technologies Co., Ltd. All rights reserved.
25
FCC compliance information statement
Product Name: AC1300 Whole Home Mesh Wi-Fi System
Model Number: Deco M5
Component Name Model
I.T.E. POWER SUPPLY T120120-2B4
Responsible party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
26
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2019.7.19
FCC compliance information statement
Product Name: I.T.E POWER SUPPLY
Model Number: T120120-2B4
Responsible party:
TP-Link USA Corporation, d/b/a TP-Link North America, Inc.
Address: 145 South State College Blvd. Suite 400, Brea, CA 92821
Website: http://www.tp-link.com/us/
Tel: +1 626 333 0234
Fax: +1 909 527 6803
27
E-mail: sales.usa@tp-link.com
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.”
We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
Issue Date: 2019-07-19
28
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
operation temperature: 0°C ~ 40°C
OPERATING FREQUENCY(the maximum transmitted power)
2412MHz—2483.5MHz (20dBm)
5150MHz—5250MHz (23dBm)
EU declaration of conformity
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce.
RF Exposure Information
This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of exposure of the general public to electromagnetic fields by way of health protection.
The device complies with RF specifications when the device used at 20 cm from your body.
National Restrictions
Attention: This device may only be used indoors in all EU member states and EFTA countries.
29
Canadian Compliance Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence­exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :
1. L’appareil ne doit pas produire de brouillage;
2. L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Caution:
The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
Avertissement:
Le dispositif fonctionnant dans la bande 5150-5250 MHz est réservé uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Déclaration d’exposition aux radiations:
Cet équipement est conforme aux limites d’exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
Industry Canada Statement
CAN ICES-3 (B)/NMB-3(B)
30
Korea Warning Statements:
୭ቘഇวษණୈཾཻါ࿪ᇦኃນয୏ะྺ࿄ྫ
NCC Notice & BSMI Notice:
岤䠑
⣜亘⡛⸆桧ꨵ岚鱖㼘䚍ꨵ堤盗椚鳵岁
痦⼧✳哬竤㘗䒭钡阮ざ呔⛓⡛⸆桧㼘걽ꨵ堤ꬋ竤鏪〳Ⱆ぀ծ㉁贪䧴⢪欽罏㖲♶䖤乲荈隶刿걽桧ծ⸈㣐⸆桧䧴隶刿⾲鏤鎙⛓暵䚍䧴⸆腊կ
痦⼧㔋哬⡛⸆桧㼘걽ꨵ堤⛓⢪欽♶䖤䕧갠굳菔㸝Ⰼ⿺䎁仟ざ岁鸑遤竤涮植剣䎁仟植韌儗䥰用⽰⨢欽⚛佖㊤荛搁䎁仟儗倰䖤糒糵⢪欽կ⵸갪ざ岁鸑 ⥌䭷⣜ꨵ⥌鋊㹁⡲噟⛓搁箁ꨵ⥌կ⡛⸆桧㼘걽ꨵ堤꨽䗽「ざ岁鸑⥌䧴䊨噟ծ猰㷸⟄⿺ꄳ派欽ꨵ岚鱖㼘䚍ꨵ堤鏤⪓⛓䎁仟կ
䥰鼙⯝䕧갠꣡鵛ꨭ麧禹窠⛓乼⡲կ
넞㟞渤䭷ぢ䚍㣔箁〫䖤䥰欽倴㔿㹁䒭럊㼩럊禹窠
㸝Ⰼ镩鑉⿺岤䠑✲갪
˖ 锝⢪欽⾲酤ꨵ彂⣘䥰㐼䧴〫腊䭽撑劥欴ㅷ岤僈涸ꨵ彂㘗⢪欽劥欴ㅷկ ˖ 幡悥劥欴ㅷ⛓⵸锝⯓䬬䱈ꨵ彂箁կ锝⺡⢪欽巊넒ծ㑑ꪒ幡悥ⷭ䧴憈䋒鹍遤幡悥կ ˖ 岤䠑꣈惐锝⺡㼞宐䧴Ⱖ➭巊넒悝扴ⵌ劥欴ㅷ♳կ ˖ 䳃坵莄Ꟛ〡⣘鸑괏⢪欽⟄焷⥂劥欴ㅷ涸乼⡲〳ꬑ⚛꣈姺麔攧锝⺡㜧㝱䧴銻覇Ꟛ〡կ ˖ 锝⺡㼞劥欴ㅷ縨佞倴ꬑ鵛攧彂涸㖑倰կꤑꬋ剣姻䌢涸鸑괏や⵱♶〳佞㖈㺙ꟗ⡙縨⚥կ ˖ 锝♶銳猙荈䩧Ꟛ堤媽♶銳㎱鑑荈遤笞⥝劥欴ㅷ锝歋䱇奙涸㼠噟➃㡦鹍遤姼갪䊨⡲կ
ꣳ欽暟颶ゎ剣䞔屣垥爙耪僈剅
ꣳ欽暟颶⿺Ⱖ⻊㷸痗贪
欴ㅷ⯋⟝ぜ珖
1$#
㢪媽 ӧ ӧ ӧ ӧ ӧ ӧ ꨵ彂⣘䥰㐼 ӧ ӧ ӧ ӧ ӧ
1C ӧӧ ӧ ӧ ӧ ӧ
$E
)H
Ⱉ⭆ꋈ
$S7*
㢴徃耡薅
1##
㢴徃✳薅ꄍ
1#%&
31
⪓罌馄ⴀXU⿺馄ⴀXU禹䭷ꣳ欽暟颶⛓涰ⴔ嫱ゎꆀ馄ⴀ 涰ⴔ嫱ゎꆀ㛇彋⧩կ
⪓罌ӧ禹䭷鑪갪ꣳ欽暟颶⛓涰ⴔ嫱ゎꆀ劢馄ⴀ涰ⴔ嫱ゎꆀ㛇彋⧩կ
⪓罌禹䭷鑪갪ꣳ欽暟颶捀䱗ꤑ갪湡կ
цѧѥћѪѡѩѨќѧѩџѫѽѡѥљїѤѥўњѽћѤѥѨѦѧїљџѢїѣџѨџѨѩќѣџъѡѧшмцчхѤїљѽћѦѥљѽћѤѽѨѩѳљџѣѥњїѣѤѥѧѣїѩџљѤџѬћѥѡѪѣќѤѩѽљѩїљџѣѥњїѣ ѰѥѦќѧќћјїѮќѤѽѮџѤѤџѣџўїѡѥѤѥћїљѮџѣџїѡѩїѣџъѡѧїѾѤџ
Safety Information
• Keep the device away from water, fire, humidity or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended
• Do not use the device where wireless devices are not allowed.
• Adapter shall be installed near the equipment and shall be easily accessible.
don't hesitate to contact us.
Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk.
Use only power supplies which are provided by manufacturer and in the original packing of this product. If you have any questions, please
32
Explanation of the symbols on the product label
Symbol Explanation
DC voltage
Indoor use only
RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys a new electrical or electronic equipment.
33
Loading...