TP Link KLM100 Users Manual

KLM100 User Manual

1.Overview

The KLM100 Wi-Fi module provides a highly-integrated and flexible platform for developing and evaluating products and applications based on the MT7682 SoC. The KLM100 Wi-Fi module can be either used with development kit for software development or incorporated into OEM products to enable rapid deployment of Wi-Fi connected systems.

The module includes the following components:

MT7682SN chip A printed antenna Shield

2.Interface and pinout Interface:

Debug UART PWM x4

Pinout:

3. Electric Feature

				Type			DC
	Power Supply			Input			3.3V0.3A
				Typical			300mW
				Standby Mode			125mW

4. Mechanic Feature

Size: 24.00mm*19.00mm*2.60mm

5. Wireless Feature

Operating Frequency:2.4GHz:2412~2462MHz

Transfer Rate:	802.11b: 11/5.5/2/1 Mbps
	802.11g: 54/48/36/24/18/9/6 Mbps
	802.11n HT20: up to 65Mbps

Wireless Channel: ch1-ch11

Transmit Power:18dBm(max)

Antenna Type: Printed omnidirectional antenna

6.Physical and Environmental

Operating Temperature: -15 85 Storage Temperature: -15 85

Working Humidity:

10% 90% RH

7 Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: