User Guide
Kasa Wire-Free Camera
1910012702 REV1.1.0
Contents
About This Guide···························································1 Introduction······································································2 Appearance······································································3 Set Up Your Camera····················································5 View Your Camera·························································7 Configure Your Camera··············································8
Check Activity Notifications····································9
Work with Other Smart Home Products········10 Authentication······························································11
About This Guide
This guide provides a brief introduction to the Indoor/Outdoor Security Camera System and the Kasa app, as well as regulatory information.
Please note that features of the product may vary slightly depending on the model and software version you have, and on your location, language and internet service provider. All images, parameters and descriptions documented in this guide are used for demonstration only.
Conventions
In this guide, the following convention is used:
Convention |
Description |
Camera |
Stands for Kasa Smart Wire-Free Camera. |
Hub |
Stands for Kasa Smart Camera Hub. |
Teal |
Key information appears in teal, including management page text such as menus, items, buttons and so on. |
Underline |
Hyperlinks are in teal and underlined. You can click to redirect to a website. |
More Info
•Specifications can be found on the product page at https://www.tp-link.com.
•Our Technical Support and troubleshooting information can be found at https://www.tp-link.com/support.
1
Introduction
An Indoor/Outdoor Security Camera System generally includes one Kasa Smart Camera Hub and one or more Kasa Smart Wire-Free Cameras. The Kasa Smart Wire-Free Camera monitors anywhere and everywhere. Monitor live video and recordings directly on the Kasa Smart app from the convenience of your smartphone. The Kasa Smart Camera Hub adds a layer of security with a siren, alert and audio recordings to mimic occupancy. Your home is always protected.
•Night Vision
At night, the camera will detect activity up to 25 ft. away with night vision.
•Wired or Wire-free
A camera that gives you freedom to take it anywhere you want. When connected to our adapter, the Kasa Smart camera allows for a pre-roll which begins recording a few seconds before every clip.
•Crystal Clear 1080p Video
Sharp and clear 1080p video makes sure you never miss a thing. In the dark, the camera will detect activity up to 25 feet away with Night Vision.
•Rechargeable Lithium Ion Battery*
With a low-power Wi-Fi protocol, we’ve extended the battery life for a longer and smarter experience.
*Optional: Adapter for wired use if needed.
•Built-in Siren and 2-way Talk
Use crisp 2-way audio to communicate with the delivery person at your front door or use the camera’s siren to scare away intruders.
•More Than A Hub
The hub helps save power and also plays as a secondary security alarm. Any intruder will be met with an unwelcome sound.
•Weatherproof
The Kasa Smart Wire-Free Camera is weatherproof and will be protected against rain and dust.
2
Appearance
Kasa Smart Wire-Free Camera has a system LED that changes color according to its status, speakers and microphone, and a Sync button. See the explanation below:
System LED
Alternating amber and green:
Powering on or starting up
Flashing green:
Connecting to hub (Discovery mode)
Solid green:
Connected to hub
Quick flashing red:
Failed to connect to or sync with hub
Flashing red once per minute:
Low battery (below 15%)
Quick flashing amber:
Firmware updating
Flashing amber once per second:
Factory resetting
Solid amber:
No connection, initializing, or rebooting
Solid blue:
Battery starts charging
Off:
No power or Status LED off
Sync button
• Press for 1 second during Discovery
mode:
Initiates the syncing process with hub
• Press and hold for about 15 seconds:
Resets the camera to factory settings
Speaker and Microphone |
Built-in internal speaker and microphone are protected by the waterproof membrane. |
Warning: Do NOT insert objects into the holes!
3
Kasa Smart Camera Hub has a LED ring that changes color according to its status, a Siren Off button, and a Reset button. See the explanation below:
System LED
Alternating amber and green:
Connected to home router but no internet connection
•Alternating red and green:
Not connected to home router and internet
Quick flashing green:
Camera attempting to sync with hub (Discovery mode)
Flashing green once per second:
Connected to home router and internet
Solid green:
Camera connected to hub
Solid red:
Camera too far from hub
Flashing red:
Siren or speaker is on
Quick flashing amber:
Firmware updating
Flashing amber once per second:
Factory resetting
Solid amber:
Powering on or starting up
Off:
Communicating with camera and internet, no camera connected, or no power
Siren Off button
•Press for 1 second when siren is on:
Turns off the siren
Reset button
•Press and hold for about 15 seconds when neither siren nor alert is playing:
Resets the hub to factory settings
4
Set Up Your Camera
Follow the steps below to get started with your new camera.
Step 1. Download Kasa |
Step 2. Log In |
Step 3. Add Camera |
Get the Kasa Smart app from the Apple App Store or Google Play, or by scanning the QR code below.
Open the app, and log in with your TP-Link ID. If you don't have an account, create one first.
Tap the 
button in the Kasa app, select Add a Device, then select Kasa Cam WireFree. Follow app instructions to add hub and cameras.
5
Loading...