Page 1
Quick Installation Guide
WLAN Bluetooth
PCI Express Adapter
Images may dier from your actual product.
Before You Start:
If you plan on using Bluetooth and already
have connected Bluetooth devices, proceed
with step 1. Otherwise, skip to step 2.
1 Disable Bluetooth
a. Right-click My Computer, select Manage,
go to Device Manager.
b. Expand the Bluetooth node to nd your
existing Bluetooth device.
c. Right-click the existing Bluetooth device
and select Disable.
Note:
Make sure you have disabled all existing Bluetooth
devices (both built-in and third party).
Device Manager
Bluetooth
Existing Bluetooth Adapter
Disable
2 Connect to a Computer
a. Turn off your computer, unplug the power
cable then remove the case panel.
b. Connect the provided Bluetooth USB cable to
the adapter.
Adapter
Bluetooth USB cable
c. Locate an available
PCIE
slot ( X1, X4 or X16)
and carefully insert the adapter.
Note:
If the bracket is not suitable for your computer, detach it from
the adapter's board and replace it with the low-prole bracket.
d. Locate an available F_USB connector and
carefully plug the Bluetooth USB cable into it.
Note:
If the Bluetooth USB cable is not correctly connected to the
motherboard, Bluetooth function won’t work even after driver
installation.
USB
USB
To continue, ip the page over.
Page 2
3 Install Drivers
4 Join a Wireless Network
5 Pair With Bluetooth Devices
e. Connect the antenna(s) to the adapter.
Tip:
To maximize performance, make sure the path between
the antenna(s) and your router is clear.
f. Replace the case panel, plug in the power
cable and turn on your computer.
a. Insert the CD and run the Autorun.exe.
Tip: You can also check the new release and download the
driver at https://www.tp-link.com/support/download/
b. Install the Wi-Fi and Bluetooth drivers.
① Wi-Fi: Click and follow the onscreen instructions
to complete the Wi-Fi installation.
② Bluetooth: Click and follow the onscreen
instructions to complete the Bluetooth installation.
Wi-Fi Bluetooth
Notes:
• If an unknown publisher message pops up, select Yes to
continue.
• If Windows User Account Control requires admin
credentials, type user name and password of your
Windows administrator account.
a. Click the network icon ( ) on the taskbar.
b. Select your Wi-Fi network, click Connect, and
enter the password when prompted.
TP-Link_XXXX
Secured
Connect
Network settings
a. Right click the (Bluetooth) icon on the taskbar.
If it's not displayed, turn on Bluetooth in your PC
settings rst.
b. Select Add a Bluetooth Device or Add a Device
to scan for available devices.
c. Select your Bluetooth device from the list and
follow the onscreen instructions to complete
pairing.
Note:
Make sure your device’s Bluetooth is enabled and discoverable.
Anna’s Phone
Jack’s Pad
Mouse
Pair
Support
For technical support, the user guide and other
information, simply scan the QR code or visit
https://www.tp-link.com/support/
To communicate with TP-Link users or engineers, please visit
https://community.tp-link.com to joinTP-Link Community.
Safety Information
· Keep the device away from water, re, humidity or hot environments.
· Do not attempt to disassemble, repair, or modify the device.
need service, please contact us.
· Do not use the device where wireless devices are not allowed.
If you
7106509698 REV2.0.0©2022 TP-Link
Loading...