Page 1
Quick
Network Name(SSID)
Channel
Signal
Security
34567_TEST
Network Na
TP-LINK_A
Installation Guide
802.11ac Wireless Dual Band PCI Express Adapter
* Archer T9E is used for demonstration in this QIG.
Image may differ from actual product.
7106505930 REV2.1.0
1
Connect to a Computer
PCI-E slot
Note: In Windows XP, a Found New Hardware Wizard window will appear when the adapter is detected. Please click Cancel.
For more information, please visit our website: http://www.tp-link.com
Insert the adapter into your computer by following these steps:
1.Install the antennas.
2.Turn off your computer, unplug the power cord and other connected
peripheral devices to your computer.
3.Remove the case panel. Locate an available PCI-E slot and remove its
slot cover.
4.Carefully insert the adapter into the PCI-E slot and secure it with the
retaining screw.
5.Replace the case panel.
6.Reconnect the power cord and turn on your computer.
2
Install Driver and Utility
You can also download the driver and utility at www.tp-link.com
A: Insert the CD and run the Autorun.exe from the pop-up
Autoplay window.
Note: In some operating systems, the CD screen will pop up automatically.
Otherwise, run the CD manually.
3
Join a Wireless Network
For Windows 8.1/10, TP-LINK Utility is not supported, please use the Windows built-in Wireless Utility to join a network.
Option 1: Via TP-LINK Utility
Select your preferred wireless network from the pop-up utility window
and click Connect. The symbol indicates a successful connection.
B: Select the model and click Install Driver and Utility, then follow the
InstallShield Wizard to complete the installation.
Option 2: Via Windows Wireless Utility
Click (Network icon) on the system tray, select your Wi-Fi network,
and click Connect.
Archer T9E
Install Driver and Utility
User Guide
Browse CD
Setup Wizard
EXIT
Status WPS Network Profile Advanced
34567_TEST
abcdef_0903
AAAAAA
WPA/WPA2-Personal
Connect automatically
WPA/WPA2-Personal
None
None
6 (2.4G)TP-LINK_A
Connect
36 (5G)
9 (2.4G)
149(5G)
Note: In Windows XP, you need to close the TP-LINK Utility before using the Windows
Wireless Utility.
Loading...