Quick Installation Guide
AC1200 Wireless Dual Band Gigabit ADSL2+
Modem Router
D5
Connecting the Hardware
If you don’t need the phone service, just directly connect the modem router to the phone jack with a phone cable, then follow steps 3 and 4 to complete the hardware connection.
Phone Jack
1 Connect the ADSL splitter to the phone jack.
LINE |
|
PHONE |
MODEM |
|
ADSL Splitter
Modem Router
2 Connect the modem router to the ADSL splitter.
Connect to the phone (Optional)
Power Adapter
3 Turn on the modem router.
4 Verify that the hardware connection is correct by checking these LEDs.
Power On |
ADSL On |
Wireless On |
Note:
1.The ADSL LED 
takes about 1 to 2 minutes to stabilize.
2.If the Wireless LED 
is o , please press the Wi-Fi button on the rear panel for 2 seconds, then check the LEDs again in a few seconds.
Loading...