Quick Installation Guide
AC1750 Wireless Dual Band Gigabit Router
C7
Connect the Hardware
If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL/Cable/Satellite modem, connect the Ethernet cable to the router’s Internet port, and then follow Step1, 5 and 6 to complete the hardware connection.
Internet
Power adapter
Power adapter
2 Turn off the modem, and remove the backup battery if it has one.
3 Connect the modem to the router’s Internet port with an Ethernet cable.
on the modem, and wait about 2 minutes
it to restart.
1 Install the antennas.
5 Connect the power adapter the router and turn on
router.
6 Verify that the following LEDs are on and solid to confirm the hardware is connected correctly.
Power |
2.4GHz |
5GHz |
Internet |
On |
On |
On |
On (Green or Orange) |
Note: If the 2.4GHz LED and 5GHz LED are off, press and hold the WPS/Wi-Fi button on the back for more than 2 seconds. Both the LEDs should turn solid on.