Toyota CAMRY 2012 Reference Guide

CAMRY

CUSTOMER EXPERIENCE CENTER

1-80 0 - 331-4331

ENTUNE INFORMATION

toyota.com/entune

2 0 1 2

NAVIGATION SYSTEM

WITH ENTUNE

QUICK REFERENCE GUIDE

Printed in U. S. A . 8 / 11

11-TCS-05011

00505-NAV12-CAM

TABLE OF CONTENTS

LIMITATIONS OF THE QUICK REFERENCE GUIDE 1

BASIC OPERATION 2

CONNECT A BLUETOOTH PHONE 3

CALLING BY VOICE RECOGNITION 4

Dial by Number 4 Dial by Name 5

DESTINATION INPUT 6 By Address 6 Note on Voice Recognition 8 Tips for Using Voice Recognition 8 By Address - Voice Recognition 8

DESTINATION INPUT - POINT OF INTEREST (POI) 10 Point of Interest by Name 10 Point of Interest by Category 11 Point of Interest by Category - Voice Recognition 12

SET HOME 13

ADDITIONAL NAVIGATION FEATURES 15 Operation of Emergency Screen 15 Search Area 15 Route Preferences 15 3 Routes 15 Screen Conﬁ gurations 15 Beep Setting 16 Voice Volume 16 Language 16

System Time 16 Auto Screen Change 16

Estimated Distance and Time 16

NAVTRAFFIC NavTrafﬁ c Preferences 18

NAVWEATHER, SPORTS, STOCKS AND FUEL 20

17

- NEW CUSTOMER REGISTRATION 21

LIMITATIONS OF THE QUICK REFERENCE GUIDE

The Quick Reference Guide is designed to provide information on the basic operation and key features of the navigation system and Entune (apps and data services). The Quick Reference Guide is not intended as a substitute for the Navigation Owner’s Manual. We strongly encourage you to review the Navigation Owner’s Manual, the quick reference guide and visit www.toyota.com/entune so you will have a better understanding of all your vehicles features and controls.

1

BASIC OPERATION

1

£

NORTH-UP OR COMPASS MODE Icon

Touch to change the map display between North-up or Head-up perspectives.

Ó

ZOOM IN/ZOOM OUT Icons

Touch to magnify or reduce the map scale.

7

6

5

4

3

2

x

DESTINATION Button

Input the destination by one of several methods.

È

MAP/VOICE Button

Repeat the last voice guidance prompt, cancel the map scrolling feature, or display the current position.

Î

SETUP Button

Adjust preferences for: general settings, voice, navigation, vehicle maintenance, phone, bluetooth, and audio.

INFO/APPS Button

{

Access APPS, fuel consumption, trafﬁ c, fuel prices, sports, stocks, weather, and map data.

Ç

CURRENT VEHICLE POSITION Mark

Indicates the current position of the vehicle and its directional heading.

2

CONNECT A BLUETOOTH PHONE

If you have difﬁ culty pairing your phone, or are unable to transfer your cell phone book, please refer to the cell phone manufacturer's user guide. If you are able to successfully transfer your phone book, you can dial by name using voice recognition. Please say the name exactly as it is entered in your phone when in the telephone screen.

step

Quick Tip - Up to 5 Bluetooth cell phones can be paired. However, only one Bluetooth cell phone can be used at a time.

Press on the faceplate followed

1

by feature on the phone is ON and is in discoverable mode.

Upon connection, the system will indicate that the pairing process was

3

successful.

. Verify that Bluetooth

step

If necessary, input the passkey listed on the screen into the approved Bluetooth

2

cell phone. Please refer to the cell phone manufacturer’s user guide for pairing procedures.

3

CALLING BY VOICE RECOGNITION

DIAL BY NUMBER

step

Quick Tip - If you know your next command, you can press Speak your command after the beep.

step

phones may or may not show battery or signal strength on the display.

Quick Tip - A noisy environment may prevent the voice recognition system from understanding your commands. It is recommended that you reduce background noise (including passenger conversation and wind noise) prior to using the Voice Recognition system.

Press on the steering wheel. After

1

the beep say, “Use the Phone.”

at any time to interrupt the prompt.

After the beep, say “Dial” or press

3

on the steering wheel.

Some Bluetooth® equipped cell

step

Quick Tip - You can skip Step 1 and say Dial commands immediately from the Shortcut Menu.

step

After the beep say, “Dial <number>.” Say the phone number digits

2

individually, without pausing (e.g. “Dial Three, one, zero, four…”).

Call is active when

4

indicated. To end call, press on the screen or wheel.

is

on the steering

4

CALLING BY VOICE RECOGNITION

DIAL BY NAME

If you have difﬁ culty pairing your phone, or are unable to transfer your cell phone book, please refer to the cell phone manufacturer's user guide. If you are able to successfully transfer your phone book, you can dial by name using voice recognition. Please say the name exactly as it is entered in your phone when in the telephone screen.

step

Quick Tip - If you know your next command, you can press Speak your command after the beep.

step

Press

1

the beep say, “Use the Phone.”

at any time to interrupt the prompt.

After the beep, say “Dial” or press

3

on the steering wheel. After

on the steering wheel.

step

Quick Tip - You can skip Step 1 and say Dial commands immediately from the Shortcut Menu.

step

After the beep say, “Call <name>.” Please say the name exactly as it is

2

entered in your phone.

Call is active when is

4

indicated. To end call, press on the screen or wheel.

on the steering

5

DESTINATION INPUT

BY ADDRESS

step

DEST

Press

1

by .

Select the desired State/Province.

on the faceplate followed

3

step

Touch step 4. To change State/Province, touch

2

Input the city name.

and move to step 3.

4

and move to

step

Touch the desired city name. Input the street name and touch

5

step

6

Quick Tip - Enter the street name without preﬁ xes such as North or the letter N. The system will display the base street name without preﬁ xes or sufﬁ xes on the next screen.

.

6