TFT LCD COLOR MONITOR
User’s manual
Model：LCD-1513VB 15.1〞
Model：LCD-1513TS 15.1〞
R
○
1319 Dexter Avenue N.#020,
Seattle,WA 98109
TEL：206/623-6000
FAX：206/623-6609
FCC Notice
This equipment has been tested and found to comply with the limits for FCC class B.
Trademarks
Trademarks are the rights of their respective owners.
We reserved the right to change the specification or the documentation without further notice. We also take no
responsibility for damage caused by improper use of this product. Warranty void if customer break the seal of the
enclosures.
Multilingual User’s Manual：
1.Introduction
Product Description …………………………
Package Contents………………………………
Product Features………………………………
Cleaning…………………………………………
2. Control Function
OSD Button ………………………………………
OSD Control………………………………………
3. Inputs Diagram
Inputs ……………………………………………
Setting Up ………………………………………
4. Display Angle ………………………………………
5. Product Specification ……………………………
6. Display Modes……………………………………………
7.Service Information…………………………………
8. Appendices………………………………………….
Page.1
Page.2
Page.2
Page.2
Page.3
Page.4
Page.6
Page.10
Page.11
Page.13
Page.14
Page.15
Page.16
Page.17
Introduction
Product Description
Congratulations on purchasing the next generation of LCD monitor display! This
state-of-the-art high brightness LCD monitor incorporates high quality display into a small light
weighted module. It has power-saving capabilities and emits no harmful X-ray radiation. You will
certainly enjoy the benefit of its features: high brightness for better visibility under any given
environment, expanded color domain for better quality images, and further viewing distance for
comfort and safety.
This LCD monitor incorporates 15” color active matrix thin-film-transistor (TFT) liquid
crystal display with ABT (Advanced Brightness Technology) that makes the screen much more
brighter in order to provide superior display performance, especially for movies and picture
display. Maximum resolution of XGA 1024 x 768 is ideal for displaying complex graphics and high
definition images. Other outstanding designs that enhance this LCD monitor’s performance are
Plug & Play compatibility, audio system, A/V input, and users friendly OSD (On Screen Display)
controls.
Package Contents
Included with your LCD monitor are following items：
z 15” TFT LCD monitor
z 15 pin D-sub signal cable
z AC power cable
z User’s manual
z Sound Card Cable
z Adaptor & AC Cord
Product Features
z High contrast color TFT LCD display support resolution up to XGA 1024 x 768.
z Compatible with IBM VGA, VESA, and Macintosh standards.
z Imbedded audio system provides sound performance.
z 2 AV-IN and S-video use.
Page.2
z Audio-1, Audio-2, and PC line in sound application.
z Power management system conforms to VESA DPMS standard.
z Support DDC1/2B for Plug & Play compatibility.
z Advanced OSD control for picture quality adjustment.
z Detachable stand for wall-mounting application.
Cleaning
z Gently wipe screen with a clean camel hair lens brush, or a soft, clean, lint-free cloth. This
removes dust and other particles that can scratch the screen.
z Do not apply pressure to the screen surface when wiping it clean.
z Do not pour or spray any liquid directly onto the screen or case of the LCD monitor.
Chemical cleaners have been reported to damage the screen or case of the LCD monitor.
Page.3
Control Function
Control Button Front View
1.Power Switch：Pressing this button turns the display system power on or off.
2.Earphone：This input would offer users another better choice in using a monitor without
3.Power LED：This Power LED indicates different status when this unit operates in different
6.Decrease
disturbing others.
modes.
3.Power LED
4.OSD Menu / Select
5.Increase
1.Power Switch 2.Earphone
Page.4
4.OSD Menu / Select：Pressing this button pops up the OSD menus on the screen, and used to
select the OSD control options on the screen.
5.Increase：This button is used to adjust the increasing value of selected OSD control option.
6.Decrease：This button is used to adjust the decreasing value of selected OSD control option.
Page.5
OSD
Tools Menu：
Monitor Function Selection Menu：
Auto Adjust：Select this function can make the monitor have best efficiency。
Brightness：Adjust the brightness using ＋ and － buttons.
Contrast：Adjust the contrast using ＋ and － buttons
Clock：Adjust the clock using ＋ and － buttons
Phase：Adjust the phase using ＋ and － buttons
Horizontal Position：Pressing ＋ moves the display image to right; Pressing －
moves the display image to left
Vertical Position：Pressing ＋ moves the display image upward; Pressing －
moves the display image downward
Page.6
Input AV1: 1st Video-out connector of any image resource
Input AV2：2nd Video-out connector of any image resource
Input S-Video：S Video-out connector of any image resource
Volume：Adjust the volume using ＋ and － buttons
Mute：Mute function.
Reset：reset function.
Page.7
RGB Adjusting Menu：
Red：Red Range
Green：Green Range
Blue：Blue Range
Page.8
OSD Function Selection Menu：
Exit OSD：Exit the OSD function selection menu.
OSD Horizontal Position：Pressing ＋ moves the OSD menu to right; Pressing －
moves the OSD menu to left
OSD Vertical Position：Pressing ＋ moves the OSD menu upward; Pressing －
moves the OSD menu downward
OSD Time Out：Set the OSD time
Moiré Adjust：Set panel moiré degrees and noise.
Page.9
Inputs Diagram
Inputs
【1】 【2】 【3】【4】
【1】AUDIO1：This can be connected to the 1st audio-out connector of any sound resource.
【2】AUDIO2：This can be connected to the 2nd audio-out connector of any sound resource.
【3】LINE IN：This can be connected to the 3rd audio-out connector of any sound resource.
【4】DC IN：This is for connecting the power cable.
【5】VIDEO1：This can be connected to the 1st video-out connector of any video resource.
【6】VIDEO2：This can be connected to the 2nd video-out connector of any video resource.
【7】S-VIDEO：This can be connected to the 3rd video-out connector of any video resource.
【8】PC IN：This can be connected with the D-Sub 15 pin signal connector.
【5】【6】【7】【8】
Page.10
Precautions
z Read all of these instructions and save them for later use.
z Follow all warnings and instructions on the product.
Product
z Do not cover block the vent holes in the case.
z Do not insert sharp objects or spill liquid into the LCD monitor through cabinet slots. They
may cause accidents, fire, electric shock or failure.
z Disconnect the power plug from the AC outlet if you will not use it for an indefinite period.
z Do not attempt to service this product yourself, by opening or removing covers may expose
you to dangerous voltage points or other risks.
z Do not touch the screen directly with your fingers. You may damage the screen, and oil from
your skin in difficult to remove.
z Do not apply pressure to screen. The LCD is a very delicate product.
Power
z Use the type of power indicated on the marked label.
Plugs
z Do not remove any of the prongs of the monitor’s three-pronged power plug.
z Disconnect the power plug from the AC outlet under following conditions：
z If you will not use it for an indefinite period time.
z When the power cord or plug is damaged or frayed.
z If the product does not operate properly, adjust only those controls that are mentioned in the
operating instructions. Improper adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to restore the product to normal
operation.
z If the product has been dropped or the cabinet has been damaged.
z If the product exhibits a distinct change in performance, indicating a need for service.
z Power and extension cords
z Do not allow anything to rest on the power cord.
Page.11
z Do not locate this product where persons will walk on the cord.
z Use the proper power cord with correct attachment plug type. If the power source is 120V
AC, use a power cord that has UL and C-UL approvals. If the power source is a 240V AC
supply, use the tandem (T blade) type attachment plug with ground conductor power cord
that meets the respective European country’s safety regulations, such as VDE for
Germany.
z Do not overload wall outlets or power cords. Ensure that the total of all units plugged into
the wall outlet does not exceed 10 amperes.
z Ensure that the total ampere ratings on all units plugged into the extension cord is not
above the cord’s rating.
z If the power supply cord, which came with your monitor, is to be connected to the PC
instead of the wall outlet, this equipment is to be used with UL/TÜV approved computers
with receptacle rated 100~240V AC, 50/60Hz, 1.0A(minimum).
Environment
z Place the monitor on a flat and leveled surface.
z Place the monitor in a will-ventilated place.
z Keep the monitor away from the following:
Do not place unit in extreme hot, cold or humid environment and do not place it directly
under sunlight, dusty surroundings, equipment that generate strong magnetic fields.
z Please adjust the frequency to 75 Hz after setting up the LCD monitor.
z Then push the OSD menu button and use the Auto Adjust function to fine the best mode of
your computer.
Page.12
Display Angle
Tilting
For viewing clarity, you can tile the LCD forward（up to 3 degrees） or backward （up to
15 degrees）.
Down：3
Right：40
o
Left：40o
Up：15
o
o
Page.13
Product Specification
Type
Spec
LCD Display 15” active matrix TFT LCD panel
Pixel Pitch 0.297(H) x 0.297(V) mm
Max. Resolution 1024(H) x 768(V) XGA
Set Size 418(H) x 399(V) x 201(D) mm
Pack Size 480(H) x 450(V) x 230(D) mm
Contrast Ratio 150:1~400:1
Brightness 500 ~ 1000 cd/m2
Response Time 20~50ms
Display Color 16.777 M
View Angle L+/R- ±60°~±80°
U+/D- ±50°~±60°
Pc Interface RGB analog 0.7V peak to peak
Video Sync. TTL positive or negative
Display Mode VGA, SVGA, XGA
Audio-in None Phone jack RCA (x 2)
Video-in None None S & RCA (x2)
Signal Connector D-sub 15 pin
Front Control Power on/off with LED, OSD Menu, +/-Adjustment
OSD Contrast, Brightness, Auto Adjust, Clock, Phase, H-Position,
Power Adapter AC Input: 100-240V~1.5A, 50-60Hz
Operating Conditions Temperature: 0℃~35℃
Storage Conditions Temperature: -20℃~60℃
Certification FCC (DOC), CE-B, VCC-I, UL, TUV/GS
Weight Net Weight：4.66Kgs, Gross Weight：6.66Kgs
PC SPEAKER AV
V-Position
Input: Pc / AV1 / AV2 / S-Video (AV)
DC Output: 12V / 5.0A
Humidity: 20%~95%
Humidity: 5%~95%
Page.14
Display Modes
Mode Resolution H Freq (kHz) V Freq (Hz)
1 640 x 350 31.469 70.087
2 640 x 400 24.823 56.416
3 640 x 400 31.469 70.087
4 640 x 480 31.469 59.940
5 640 x 480 35.000 66.667
6 640 x 480 37.861 72.809
7 640 x 480 37.500 75.000
8 720 x 400 31.469 70.087
9 800 x 600 35.156 56.250
10 800 x 600 37.879 60.317
11 800 x 600 48.077 72.188
12 800 x 600 46.875 75.000
13 832 x 624 49.107 75.087
14 1024 x 768 48.363 60.004
15 1024 x 768 56.476 70.069
16 1024 x 768 60.023 75.029
Page.15
Service Information
Service
Please review the warranty information located on the back of the Quick Start Guide or
Appendices
contact your local authorized distributor/retailer.
Troubleshooting
If you are experiencing trouble with your LCD display, please refer to the following.
If the problem persists, please contact your local dealer or our service center.
Note: For best viewing image effect, please set resolution at 1024x768
Problem: No signal
Ensure all cables and power connections are correctly and securely connected.
Check the power LED light is in “green” color.
Make sure the computer is on.
Press the OSD “Auto Setup” for best view result.
Problem: Image is out of focus
Adjust “Phase” function inside the OSD until the image is focused.
Page.16
Page.17
Loading...