Toshiba MD20FN1C-R User Manual

COMBINATION 20” FLAT COLOR TELEVISION AND
DVD/CD PLAYER
COMBINÉ TÉVÉVISEUR COULEUR PLAT DE 20
POUCES ET DVD/CD

Owner’s Manual
Manuel d’instructions

MD20FN1C/R

DIGITAL VIDEO

ATTENTION

For your protection in the event of theft or loss of this product, please fill in the informa­tion listed below which is for your own personal records.
Pour votre protection en cas de vol ou de perte de l’appareil, veuillez inscrire ci-dessous
les renseignements demandés.

Date of Purchase :
Date d'achat :
Serial No. :
Numéro de série :
Place of Purchase :
Lieu d'achat :

TV/CATV MODE SELECTION

SELECTION DU MODE TV/CATV

When shipped from the factory, the TV/CATV menu option is set to the
“CATV”(Cable Television) mode.
If not using CATV, set this menu option to the “TV” position.
Lors de la fabrication de l'appreil, l'option du menu TV/CATV est réglée au mode “CATV”
(câblodistribution).
Si vous n'utilisez pas la câblodistribution, choisissez l'option “TV”.

Before operating the unit, please read this manual thoroughly.

Avant de mettre cet appareil en marche, veuillez lire attentivement ce manuel.

ENGLISH

The lightning flash with arrowhead

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

symbol, within an equilateral triangle is
intended to alert the user to the
presence of uninsulated dangerous
voltage within the product's
enclosure that may be of sufficient mag­nitude to constitute a risk of electric shock.

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN

OR MOISTURE.

CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EX-

TENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE
FULLY INSERTED TO PREVENT BLADE EXPOSURE.

WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the distance between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance with

the FCC (Federal Communications Commission) Rules could void the user's authority to operate
this equipment.

COPYRIGHT: It is permissible to record television programs, films, video tapes and other material only in the

event that third party copyrights and other rights are not violated.

The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature accompa­nying the appliance.

CAUTION:

THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM.

TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE
READ THIS OWNER'S MANUAL CAREFULLY AND RETAIN
FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE
MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LO­CATION-SEE SERVICE PROCEDURE.

USE OF CONTROLS, ADJUSTMENTS OR THE PERFORM­ANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPO­SURE.

TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT
TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIA­TION MAY BE PRESENT WHEN THE ENCLOSURE IS
OPENED. DO NOT STARE INTO BEAM.

2

Location of the required Marking

The rating sheet and the safety caution
are on the rear of the unit.

CERTIFICATION: COMPLIES WITH
FDA RADIATION PERFORMANCE
STANDARDS, 21 CFR SUBCHAPTER J.

IMPORTANT SAFEGUARDS

1. READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2. RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3. HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4. FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5. CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning the exterior cabinet only.

6. ATTACHMENTS

The manufacturer of this unit does not make any recommendations for attachments, as they may cause
hazards.

7. WATER AND MOISTURE

Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.

8. ACCESSORIES

Do not place this unit on an unstable cart, stand, tripod, bracket, or table.
The unit may fall, causing serious injury, and serious damage to the unit.

8A. An appliance and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the appliance and cart
combination to overturn.

9. VENTILATION

Slots and openings in the cabinet back or bottom are provided for ventilation,
and to ensure reliable operation of the unit, and to protect it from overheating.
These openings must not be blocked or covered. The openings should never be blocked by placing the unit
on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat
source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have been adhered to.

10. POWER SOURCE

This unit should be operated only from the type of power source indicated on the rating plate. If you are not
sure of the type of power supply to your home, consult your appliance dealer or local power company. For
units intended to operate from battery power, or other sources, refer to the respective pages on this
Owner's Manual for their operating instructions.

11. GROUNDING OR POLARIZATION

This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Instead of the polarized alternating-current line plug, your unit
may be equipped with a 3-wire grounding-type plug (a plug having a third (grounding) pin). This plug will
only fit into a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug
into the outlet, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the grounding-type plug.

PORTABLE CART WARNING

(symbol provided by RETAC)

S3126A

ENGLISH

3

IMPORTANT SAFEGUARDS

12. POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point
where they exit from the appliance.

13. LIGHTNING

To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the
unit due to lightning and power line surges.

14. POWER LINES

An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from touching such power lines or circuits,
as contact with them might be fatal.

15. OVERLOADING

Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.

16. OBJECT AND LIQUID ENTRY

Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short
out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.

17. OUTDOOR ANTENNA GROUNDING

If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is
grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the
National Electrical Code (NEC), ANSI/NFPA 70, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and require­ments for the grounding electrode.

18. SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
For example:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the unit.
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the operating instructions. Adjust only those

controls that are covered by the operating instructions, as an improper adjustment of other controls
may result in damage and will often require extensive work by a qualified technician to restore the

unit to its normal operation.
e. If the unit has been dropped or the cabinet has been damaged.
f. When the unit exhibits a distinct change in performance, this indicates a need for service.

19. REPLACEMENT PARTS

When replacement parts are required, be sure the service technician uses replacement parts specified by
the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock or other hazards.

20. SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to
determine that the unit is in proper operating condition.

21. HEAT

The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.

22. DISC TRAY

Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.

23. CONNECTING

When you connect the product to other equipment, turn off the power and unplug all of the equipment from
the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's
manual of the other equipment carefully and follow the instructions when making any connections.

24. SOUND VOLUME

Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume
sound may cause hearing or speaker damage.

(Continued)

4

25. SOUND DISTORTION

Do not allow the product output distorted sound for a longtime. It may cause speaker overheating and fire.

26. HEADPHONES

When you use the headphones, keep the volume at a moderate level. If you use the headphones continu­ously with high volume sound, it may cause hearing damage.

27. LASER BEAM

Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the
laser beam. It may cause sight damage.

28. DISC

Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious
personal injury and product malfunction.

29. NOTE TO CATV SYSTEM INSTALLER

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con­nected to the grounding system of the building, as close to the point of cable entry as practical.

EXAMPLE OF ANTENNA GROUNDING AS PER THE

NATIONAL ELECTRICAL CODE

ANTENNA LEAD
IN WIRE

ENGLISH

GROUND

CLAMP

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)

ELECTRIC SERVICE

EQUIPMENT

NEC-NATIONAL ELECTRICAL CODE

S2898A

GROUNDING CONDUCTORS
(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)

IMPORTANT RECYCLING INFORMATION

This product uses both Cathode Ray Tube (CRT) and other components that
contain lead. In your community there might be regulations that require you
to dispose these materials properly under environmental considerations.
Please contact your local authorities, or the Electronic Industries Alliance
(http://www.eiae.org) for disposal or recycling information.

5

Notes on discs

On handling discs

Do not touch the playback side of the disc.

Playback side

Do not attach paper or tape to discs.

On cleaning discs

Fingerprints and dust on the disc cause picture and
sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc
clean.

Structure of disc contents

Normally, DVD video discs are divided into titles, and
the titles are sub-divided into chapters. Video CDs and
Audio CDs are divided into tracks.

DVD video disc

DVD video disc

Title 1

Chapter 1 Chapter 2 Chapter 1 Chapter 2 Chapter 3

Video CD/Audio CD

Video CD/Audio CD

Track 1 Track 2 Track 3 Track 4 Track 5

Each title, chapter or track is assigned a number, which
is called “title number”, “chapter number” or “track
number” respectively.
There may be discs that do not have these numbers.

Title 2

If you cannot wipe off the dust with a soft cloth, wipe
the disc lightly with a slightly moistened soft cloth and
finish with a dry cloth.

Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or antistatic
spray for vinyl LPs. It may damage the disc.

On storing discs

Do not store discs in a place subject to direct sunlight
or near heat sources.

Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier.

Store discs vertically in a case. Stacking or placing
objects on discs outside of their case may cause
warping.

Notes on copyright

It is forbidden by law to copy, broadcast, show,
broadcast on cable, play in public, and rent copyrighted
material without permission.

This device does not tape-record copy protected DVD
Video Discs.
The device is not to be used for copying copyrighted
content without the express written permission of the
copyright owner.
Obtaining such permission is the sole responsibility of
the user.

This product incorporates copyright protection
technology that is protected by method claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.

6

Contents

Before using your unit

IMPORTANT SAFEGUARDS .............................................. 3

Notes on discs...................................................................... 6

Contents ............................................................................... 7

Parts and functions .............................................................. 8

Remote control ..................................................................... 9

Power source ..................................................................... 10

Antenna connections.......................................................... 11

Cable TV connections ........................................................ 12

TV operation

Setting the language .......................................................... 13

TV operation....................................................................... 14

Closed captions.................................................................. 16

To memorize channels ....................................................... 17

Picture control adjustment.................................................. 19

Sound control adjustment .................................................. 20

Stereo and Second Audio Program (SAP) ......................... 21

Playback operation

Disc .................................................................................... 22

Preparation/Status display of disc/To turn off the PBC ...... 23

Playback procedure ........................................................... 24

Special playback ................................................................ 25

ENGLISH

Advanced function

Zooming/Locating desired scene ....................................... 26

Repeat, Random and Program playback/Repeat A-B........ 27

Changing soundtrack language/Subtitles .......................... 28

Changing angles/Title selection/DVD menu....................... 29

Additional information

Setting language ................................................................ 30

Setting the aspect ratio of TV screen/Setting on screen

display ................................................................................ 31

Dynamic Range Control ..................................................... 32

Parental control setting ..................................................... 33

To change the parental level .............................................. 34

Temporary disabling of rating level by DVD disc ................ 35

Connections to other equipments ...................................... 36

Language code list ............................................................. 38

Reception disturbances...................................................... 39

Problems and troubleshooting .............................................

Specifications ..................................................................... 42

Warranty............................................................................. 43

40

7

Parts and functions

Front

Remote sensor

POWER button

Power indicator

OPEN/CLOSE button

VOLUME UP/DOWN buttons

CHANNEL UP/DOWN buttons

AUDIO (L/R)/VIDEO IN jacks (LINE2)

Disc tray

SKIP buttons

STOP button

PLAY button

Headphone jack

Rear

AC power cord

AUDIO (L/R)/VIDEO IN jacks (LINE1)

COAXIAL DIGITAL AUDIO OUT jack

RF IN jack

8

Remote control

TV/DVDRECALL

79

8

SLEEP

0

TOP MENU

SUBTITLE

SETUP/MENU DVD MENU

CH +

VOL – VOL +

RETURN

REV

SKIP STOP SKIP JUMP

SLOW PAUSE SLOW REPEAT A–B

CH –

PLAY FWD PLAY MODE

321

654

CLOSED

CAPTION

AUDIO

POWER

INPUT SELECT

GAME

OPEN/CLOSE

MUTE

ANGLE

ZOOM/CH RTNCANCEL

ENTER

Page

RECALL Call TV information 15

TV/DVD Switch between TV/AV and DVD 23

POWER Power On/Off 13,14,23

0-9 Direct channel selection of TV 14,18

INPUT SELECT Switch between TV/AV 37

GAME Switch between TV/AV and GAME 37

OPEN/CLOSE Open or Close the tray 24,35

SLEEP Sleep timer 15

CLOSED CAPTION Switch between TV/Caption/Text in 16

MUTE Switch off the sound 15

TOP MENU Select title 29

SUBTITLE Set Subtitle 28

AUDIO Switch the sound of TV 21

ANGLE Change playback angle 29

SETUP/MENU TV mode - Display menu of TV 13,17~20

DVD MENU Display DVD menu 29

CANCEL Reset information in the menu

ZOOM/CH RTN Switch between present/last channel 15

CH +/– Select channel of TV 15

VOL +/– Adjust volume of TV 14

RETURN Remove DVD set up menu 30~35

ENTER Enter information in the menu 13,24

FWD/REV Fast Forward/Review playback 25

PLAY Playback 24,25,27,29,35

PLAY MODE Select playback mode 27

SKIP Skip chapter to forward or reverse 25

STOP Stop 24,27

JUMP Locating desired scene 26

SLOW Forward/Reverse- slow motion 25

PAUSE Pause CD sound 25

REPEAT A-B Repeat playback between A and B 27

Call DVD information 23

Input setting 26,27
Enter a password 33~35

Closed Caption mode

Change sound track language 28

DVD mode - Call up initial setup mode 30~34

19,20,26,33,34

Zoom 26

Cursor buttons 13,17~20

24,26,29~34

Cursor buttons 13,17~20

24,26,29~34

26,27,29~35

direction

Still picture of DVD

ENGLISH

9

Remote control/Power source

Inserting Batteries

Slide the battery compartment

123

cover in the direction of the
arrow.

Operation

• Aim the remote control at the remote sensor and
press control buttons to operate.

• Operate the remote control within 30° angle on
either side of the remote sensor, up to a dis­tance of Approx. 5 meters.

The precautions below should be followed when using batteries in this device:

1. Use only the size and type of batteries specified.

2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.

Reversed batteries may cause damage to the device.

3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh

ones.

4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury

from possible battery leakage.

5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture (Follow battery

manufacturer’s directions).

Install two “AAA” batteries
(supplied), paying attention to
the polarity diagram in the
battery compartment.

Replace the compartment
cover.

Approx. 5 meters

Power source

Wider Hole
and Blade

Polarized AC Cord Plug
(One blade is wider than the other.)

10

AC Outlet

TO USE AC POWER SOURCE

Use the AC polarized line cord provided for operation on AC. Insert
the AC cord plug into a standard 120V 60Hz polarized AC outlet.

NOTES:

Never connect the AC line cord plug to other than the specified

•

voltage (120V 60Hz). Use the attached power cord only.
If the polarized AC cord does not fit into a non-polarized AC

•

outlet, do not attempt to file or cut the blade. It is the user’s
responsibility to have an electrician replace the obsolete outlet.
If you cause a static discharge when touching the unit and the

•

unit fails to function, simply unplug the unit from the AC outlet
and plug it back in. The unit should return to normal operation.
If the AC cord plug is plugged in for the first time, wait for about

•

5 seconds before pressing the POWER button.

Antenna connections

If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna
system. If you are using a cable TV service (CATV), see page 12 for Cable TV connections.

Combination VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire)

Connect the 75 ohm Cable from the Combination
VHF/UHF Antenna to the Antenna Jack.

Antenna

Jack

75 ohm
Coaxial
Cable

300-75 ohm
Matching
Transformer

Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm Twin-lead Wires)

Antenna

Jack

300-75 ohm
Matching
Transformer

Antenna

Jack

If your Combination VHF/UHF Antenna has a 300
ohm Twin-lead Wire, the use of the 300-75 ohm
Matching Transformer may be necessary.

Connect the UHF 300 ohm Twin-lead Wire to the
Combiner (not supplied). Connect the VHF 300
ohm Twin-lead Wire to the 300-75 ohm Matching
Transformer. Attach the Transformer to the Com­biner, then attach the Combiner to the Antenna
Jack.

ENGLISH

Combiner

UHF 300 ohm

VHF 300 ohm

Separate VHF/UHF Antennas (75 ohm VHF Cable and 300 ohm UHF Twin-lead Wires)

Antenna

Jack

VHF 75 ohm

Combiner

UHF 300 ohm

Connect the VHF 75 ohm cable and UHF 300 ohm
Twin-lead Wire to the Combiner. Attach the Com­biner to the Antenna Jack.

11

Cable TV connections

This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable
TV Converter box. Some cable companies offer “premium pay channels” in which the signal is
scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device
which is generally provided by the cable company.

FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE

Antenna

Jack

75 ohm
Coaxial Cable

For basic cable service not requiring a Converter/Descrambler
box, connect the CATV 75 ohm Coaxial Cable directly to the
Antenna Jack on the back of the TV/DVD.

FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE

If you subscribe to a cable TV service which requires the use of a Converter/Descrambler box, connect the
incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable,
connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV/DVD. Follow the
connections shown below. Tune the TV/DVD to the output channel of the Converter/Descrambler box (usually
channel 3 or 4) and use the Converter/Descrambler box to select channels.

Incoming
75 ohm
CATV Cable

Converter/

Descrambler

75 ohm Cable to
TV/DVD

Antenna

Jack

FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH
SCRAMBLED PREMIUM CHANNELS

If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the
use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available from
the Cable company or an electronics supply store). Follow the connections shown below. With the switch in the “B”
position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the “A” position, tune
your TV/DVD to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/
Descrambler box to tune scrambled channels.

Incoming
75 ohm
CATV Cable

Splitter

Converter/

Descrambler

A/B Switch

75 ohm Cable

A

to TV/DVD

B

Antenna

Jack

12

Setting the language

You can choose from three different languages (English, French and Spanish) for the on-screen displays.
Adjustment menus and messages will appear in the language of your choice.
On-screen language selection (step 5) will automatically appear on the screen when you press the MENU
button initially. Select the language you prefer first, then proceed with the other menu options.

To turn on the TV/DVD, press POWER. The Power indicator

1

will light.

TV/DVDRECALL

79

8

SLEEP

0

TOP MENU

SUBTITLE

SETUP/MENU DVD MENU

VOL – VOL +

RETURN

PLAY FWD PLAY MODE

REV

SKIP STOP SKIP

SLOW PAUSE SLOW REPEAT A–B

CH +

CH –

321

654

CLOSED
CAPTION

AUDIO

POWER

INPUT SELECT

GAME

OPEN/CLOSE

ANGLE

ZOOM/CH RTNCANCEL

ENTER

MUTE

JUMP

Press MENU in the TV mode.

2

The TV menu screen will appear.

Press or until the OPTION

3

menu appears.

4

Press

or to select the

“LANGUAGE” option, then press

or button.

Press or to select the

5

desired language: English
(ENGLISH), Spanish
(ESPAÑOL) or French
(FRANCAIS), then press
ENTER.

LANGUAGE/IDIOMA/LANGUE

/ / / /MENU

<

LANGUAGE/IDIOMA/LANGUE

/ / / /MENU

<

LANGUAGE/IDIOMA/LANGUE

ENGLISH

ESPAÑOL
FRANCAIS

/ / ENTER / MENU

<

>

<

<

ENGLISH

NOTES:

If the unit does not operate properly,

•

or No key operation (by the unit and/
or the remote control): Static electricity,

etc., may affect the player's operation.
Disconnect the AC power cord once, then
connect it again.
The TV section has its own menu and also

•

DVD section has its own menu (see page

30).

Press MENU until the MENU

6

screen is cleared.

13

TV operation

VOLUME 32

TV/DVDRECALL

79

8

SLEEP

0

TOP MENU

SUBTITLE

DVD MENU

SETUP/MENU

VOL – VOL +

RETURN

PLAY FWD PLAY MODE

REV

SKIP STOP SKIP

SLOW PAUSE SLOW REPEAT A–B

CH +

CH –

321

654

CLOSED
CAPTION

AUDIO

POWER

INPUT SELECT

GAME

OPEN/CLOSE

MUTE

ANGLE

ZOOM/CH RTNCANCEL

ENTER

JUMP

To turn on the TV/DVD, press

1

POWER.

Adjust the volume level by

2

pressing VOL + or –. The
volume level will be indicated on
the screen by green bars. As the
volume level increases, so do
the number of bars. If the
volume decreases, the number
of green bars also decreases.

Set the TV/CATV menu

3

option to the appropriate

TV - VHF/UHF channels
CATV - CABLE TV channels

position. (See page 17.)

Press the Direct Channel selection

4

buttons to select the channel.

TV Mode Direct Channel Selection

When the TV/CATV menu option is
in the TV position, all channels can
be instantly selected by using two
buttons. (for example, to select
channel 2, press “0”, then “2”. If
you press only “2”, channel
selection will be delayed for a few
seconds.) For channels 10 and
above, press the 2 digits in order.

CATV Mode Direct Channel Selection

When the TV/CATV menu option is in the CATV position, channels
can be selected as follows:
TO SELECT CATV CHANNELS:
1-9: Press “0” twice, then 1-9 as needed. Example, to select

channel 2, press “002”.

10-12: Press “0”, then the remaining 2 digits. Example, to

select channel 12, press “012”.

13-99: Press the 2 digits in order. Example, to select channel

36, press “36”.

100-125: Press the 3 digits in order. Example, to select channel

120, press “120”.

NOTE FOR CHANNELS 1-12:

If only 1 or 2 buttons are pressed, the corresponding channel
will be selected in 2 seconds.

CH 012

NOTES:

If a channel with no broadcast is

•

selected, the sound will automati­cally be muted.
If a station being viewed stops

•

broadcasting, the TV will automati­cally shut itself off after 15 minutes.

14

TV

VHF
2-13

UHF

14-69

CATV

VHF
2-13

STD/HRC/IRC

14-36

(A) (W)

37-59

(AA) (WW)

60-85

(AAA) (ZZZ)

86-94

(86) (94)

95-99

(A-5) (A-1)

100-125

(100) (125)

01

(5A)