Toshiba L43** Digital Series, L63 Digital Series, M63 Digital Series, W43 Digital Series User Manual

USER MANUAL

L43** Digital Series

W43** Digital Series

English

Contents

INSTALLING YOUR TV

Safety Precautions .......................................................4

Installation and important information ..........................5

The remote control .......................................................7

Inserting batteries and effective range..................7

CONNECTING YOUR TV

Connecting external equipment....................................8

Connecting an HDMI

device............... ..... ..... ...... ..... ...9

To connect an HDMI device..................................9

HDMI’s ARC (Audio Return Channel) feature.......9

Connecting an HDMI CEC Control compatible

device......................................................................10

Connecting a computer ..............................................11

To connect a PC to the HDMI terminal ... ............11

To connect a PC to the RGB/PC terminal...........11

Connecting a home network.......................................12

To connect the TV to a home network - Wired....12

To connect the TV to a home network with an

internet connection - Wireless..........................12

To connect the TV to the PC with

Intel

Wireless Display.... ...... ..... ......................12

Controls and input connections..................................13

Switching on........................................................13

Using the TV controls and connections...............13

Using the menu system.......................................14

SETTING UP YOUR TV

Startup Application ..... ..... ..... ..... ...... ..... ......................15

Quick Setup.........................................................15

Ant/Cable/Satellite (if available)..........................20

Satellite Settings .................................................21

Auto Tuning.........................................................22

ATV Manual Tuning....................................................23

Tuning .................................................................23

Skip.....................................................................24

Sorting positions..................................................25

DTV Manual Tuning ...................................................25

Manual Tuning ....................................................25

Manual Tuning for DVB-C...................................26

Manual Tuning for DVB-S...................................26

DTV Settings ..............................................................26

Channels (Antenna/Cable)..................................26

Channels (Satellite).............................................27

Standby Channel Update........................ ...... ..... .27

Location setting...................................................27

Analogue switch-off.............................................27

CONTROLS AND FEATURES

General controls .........................................................28

Quick Menu.........................................................28

Selecting channels..............................................28

The Time Display – analogue only.....................28

Stereo and Bilingual transmissions.....................28

Sound controls ...........................................................29

Volume controls and sound mute........................29

Dual.....................................................................29

Balance...............................................................29

Bass, Treble........................................................29

Voice Enhancement............................................29

Dynamic Bass Boost...........................................29

Stable Sound

....................................................29

Dynamic Range Control......................................29

Audio Level Offset............................................... 30

TV Speakers On/Off............................................30

Headphone Settings ...........................................30

Audio Description................................................30

Widescreen viewing ... ..... ...... ..... ..... ..... ...... ..... ...........31

Picture controls .......................................................... 33

Picture Mode.......................................................33

Picture preferenc es........ ..... ..... .......................... . 33

Reset...................................................................33

ColourMaster ......................................................33

Base Colour Adjustment.....................................34

Colour Temperature............................................34

Auto Brightness Sensor ......................................34

Active Backlight Control......................................34

Black/White Level ...............................................34

MPEG NR – Noise Reduction.............................34

DNR – Digital Noise Reduction........................... 35

Resolution +........................................................ 35

Cinema Mode......................................................35

Resetting the advanced picture settings.............35

Expert Picture Settings ............ .......................... .35

Automatic Format (Widescreen) .........................37

4:3 Stretch...........................................................37

Picture Position................................... ..... ..... ..... . 37

Picture still...... ..... ..... ...... ..... ..... ..... ......................37

HDMI Information Display...................................37

Wireless LAN Information ..........................................38

Setting up the Network...............................................39

Wireless Setup............... ..... ..... ..... ...... ................39

Advanced Network Setup ................................... 42

DNS Setup.......................................................... 43

Network Connection Test....................................43

Using the software keyboard .............................. 44

Network Device Setup................................................44

Apps Control Profile............................................44

TV Power On Control (Active Standby) .............. 45

Media Renderer Setup........................................45

Device Name Setup............................................45

USB HDD Record Function........................................46

Setting up the USB HDD for recording .... ..... ......46

To record DTV programmes (One Touch

Recording) .......................................................46

How to set recordings via the Programme

Guide ...............................................................47

To check, edit or delete scheduling information..49

To view a recorded programme.......................... 49

Operations from the Library screen ....................50

Recording Setup ............ .....................................51

Scheduling priority ..............................................52

Using the Cloud TV Service.......................................52

Using Web Browser ............................................52

English

Using Skype........................................................54

Using Hybrid TV Standard (if available) .....................59

Using Intel

Wireless Display.....................................59

Intel

WiDi Device Name....................................60

Device List...........................................................60

Using the Media Player ........ ..... ...... ..... ..... ..... ...... ..... .60

Basic operation ...................................................61

Viewin g photo files (on a media server or USB

device)..............................................................62

Viewing movie files (on a media server or USB

device)..............................................................64

Playing music files (on a media server or USB

device)..............................................................66

Other features ............................................................67

Panel Lock ..........................................................67

Blue Screen.........................................................67

Netflix

................................................................68

The timers ..................................................................68

Programme Timers – digital only .......................68

On Timer....................... ..... ...... ..... ..... ..... ...... ......68

Sleep Timer.........................................................69

Energy Saving Settings..............................................69

Automatic Power Down.......................................69

No Signal Power Down .......................................69

Digital on-screen information................ ......................70

Information ..........................................................70

Using EPG (Electronic Programme Guide) ................71

Using Broadcast Guide .......................................71

Genre selection/searching ..................................71

Digital settings – parental control ...............................72

Parental PIN Setup .............................................72

Parental Setup ....................................................72

Digital settings – Channel Options .............................73

Selecting favourite channels...............................73

Favourite Channel List .................. ......................73

Skip channels......................................................73

Locking channels ................................................74

Digital settings – other settings ..................................74

Subtitles ..............................................................74

Audio languages .................................................74

Common Interface...............................................75

Software Upgrade and Licences ................................75

Searching for New Software ...............................75

Network Upgrade ................................................75

Software Licences...............................................76

System Information and Reset TV ............................. 76

System Information............................................. 76

Reset TV.............................................................76

PC Settings ................................................................77

Horizontal and Vertical Position..........................77

Clock Phase........................................................77

Sampling Clock...................................................77

Reset...................................................................77

Input selection and AV connection s ..................... ......78

Input selection.....................................................78

Labelling video input sources..............................78

Digital Audio Output............................................79

Using HDMI CEC Control...........................................80

Enable HDMI CEC Control ...................... ..... ..... .80

TV Auto Power....................................................80

Auto Standby ......................................................80

Amplifier Control .................................................80

Initial Speaker Setting.........................................80

HDMI CEC Control input source selection.......... 80

HDMI CEC Control one touch play .....................81

HDMI CEC Control system standby....................81

Using MHL TV function .............................................. 81

Connecting an MHL-compatible device ..............81

Operating an MHL-compatible device.................81

MHL Setup.......................................................... 81

TEXT SERV ICE S

Text services..............................................................82

Selecting modes .................................................82

Text information ..................................................82

Navigating pages using Auto..............................82

Navigating pages using LIST..............................82

Control buttons....................................................83

PROBLEM SOLVING

Questions and Answers ........................................... 84

INFORMATION

Information .................................................................87

Licence information.................................................... 91

Specifications and accessories..................................93

During the life of your TV firmware updates will be made available to ensure that your TV maintains optimum performance:

If your TV is connected to the internet, firmware will be automatically made available.

If your TV is not connected to the internet, you can download the latest version of firmware from

www.toshiba-om.net/firmware.php

*Some features are limited due to local legislation and may not be available in all countries.

English

INSTALLING YOUR TV

Safety Precautions

This equipment has been designed and manufactured to meet int ern atio nal saf ety stan dar ds but , l ike a ny elec tric al equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products, and some points may not apply to the goods you have just purchased.

Leave mor e than 1 0 cm clearance a round the tel evisio n to allow adequate ventilation. This will prevent overheating and possible damage to the television. Dusty places should also be avoided. For wall mounted positions at least 2.5 cm gap was retained from the wall and the 10 cm was kept clear around all edges of the TV.

Damage may occur if the television is left in direct sunlight or near a heater. Avoid places subject to extremely high temperatures or hum idit y. Place in a location w her e the temperature remains between 5 °C min. and 35 °C max.

The mains supply required for this equipment is 220-240 V AC 50 Hz. Never connect to a DC supply or any other power source. DO ensure that the television is not standing on the mains lead. DO NOT cut off the mains plug from this equipment, this incorporates a special Radio Interference Filter, the removal of which will impair its performance. IF IN DOUBT, PLEASE CONSULT A COMPETENT ELECTRICIAN.

DO read the operating instructions before you attempt to

use the equipment.

DO ensure that all electrical connections (including the

mains plug, extension leads and inter-connections between pieces of equipment) are properly made and in accordance with the manufacturers’ instructions. Switch off and withdraw the mains plug before making or changing connections.

DO consult your deale r if you ar e ev er in dou bt abou t th e

installation, operation or safety of your equipment.

WARNING: To prevent injury, this apparatus must be

securely attached to the floor/wall in accordance with the installation instructio ns. Se e page 5.

DO be careful with glass panels or stands on equipment. DO use a soft, dry cloth to clean the unit.

DO NOT obstruct the ventilation openings of the

equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the eq uipment .

DO NOT allow electrical equipment to be exposed to

dripping or splashing or objects filled with liquids, such as vases, to be placed on the equipment.

DO NOT place hot objects or naked flame sources, such

as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to fires.

DO NOT use makeshift stands and NEVER fix legs with

wood screws.

DO NOT leave equipment switched on when it is

unattended, unless it is specifically stated that it is designed for unattended operation or has a standby mode. Switch off by withdrawing the plug, and make sure your family knows how to do this. Special arrangements may need to be made for people with disabilities.

DO NOT continue to ope rate t he equ ipment if yo u are in

any doubt about it working normally, or it is damaged in any way – switch off, withdraw the mains plug and consult your dealer.

DO NOT push/pull CI CAM at a tilt to prevent breakdown

of COMMON INTERFACE.

WARNING: Excessive sound pressure from earphones

or headphones can cause hearing loss.

ABOVE ALL - NEVER let anyone, especially children, push or hit the screen and cabinet back, or push any thi ng i nto h ol es, s l ots or an y other openings in the case. These actions will damage screen or internal parts.

NEVER guess or take chances with electrical equipment of any kind - it is better to be safe than sorry.

Air Circulation

Heat Damage

Mains Supply

DO NOT REMOVE ANY FIXED COVERS AS THIS WILL EXPOSE DANGEROUS AND ‘LIVE’ PARTS.

THE MAINS PLUG IS USED AS THE DISCONNECTING DEVICE AND THEREFORE SHOULD BE READILY OPERABLE.

Do not

WARNING: To prevent the spread of

fire, keep candles or other open flames away from this product at all times.

English

INSTALLING YOUR TV

Installation and important information

Locate the television away from direct sunlight and strong lights. Soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen.

Place the TV on a stable, level surface that can support the weight of the TV. In order to prevent injury and maintain stability of this apparatus, secure the TV using the fixing in the stand.

The LCD display panels are manufactured using an extremely high level of precision technology; however, sometimes some parts of the screen may be missing picture elements or have luminous spots. This is not a sign of a malfunction.

Make sure the television is located in a position where it cannot be pushed or hit by objects, as pressure will break or damage the screen. Also, please be certain that small items cannot be inserted into slots or openings in the case.

Avoid using chemicals (such as air refreshers, cleaning agents, etc.) on or near the TV pedestal.

Studies indicate that plastics may weaken and crack over time from the combination effects of chemical agents and mechanical stress (such as weight of TV). Failure to follow these instructions could result in serious injury and/or permanent damage to TV and TV pedestal.

Use a wall bracket appropriate for the size and weight of the LCD TV.

• Two people are required for installation.

• Install a wall-mount from another manufacturer. 1 Unplug and remove any cables and/or other

component connectors from the rear of the TV.

2 Carefully lay the front of the unit face down on a flat,

cushioned surface such as a quilt or blanket.

3 Follow the instructions provided with your wall bracket.

Before proceeding, make sure the appropriate bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket.

4 Always use the screws supplied or recommended by

the wall mount ma nufactur er.

Removing the Pedestal Stand:

1 Carefully lay the front of the unit face down on a flat,

cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface.

NOTE: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel.

2 Remove the screws.

3 Once you have removed all screw s hold i ng the

pedestal stand in place, remove the pedestal stand from the TV by sliding the pedestal stand away from the TV.

• Interoperability with MHL devices of other

manufacturers is not guaranteed .

• Toshiba does not provide any guarantee, therefore,

against operational failure such as that described below when an MHL source is connected to the TV.

- No picture or sound

- Some of the functions do not work by remote operation from the TV

• If the MHL does not work properly, also contact the manufacturer of the source device for advice on its use.

Where to install

Stand style is dependent on model

Screw (supplied)

9 mm 20 mm 4 mm

When using a Wall Bracket

Screws

When using MHL (Mobile High-definition Link)

English

INSTALLING YOUR TV

The digital reception function of this television is only effective in the countries listed in the “Country” section of the “Installation” menu. Depending on country/area, some of this television's functions may not be available. Reception of future additional or modified services can not be guaranteed with this television.

If stationary images generated by 4:3 broadcasts, text services, channel identification logos, computer displays, video games, on-screen menus, etc. are left on the television screen for any length of time, they could become conspicuous. It is always advisable to reduce both the brightness and contrast settings.

Very long, continuous use of the 4:3 picture on a 16:9 screen may result in some retention of the image at the 4:3 outlines. This is not a defect of the LCD TV and is not covered under the manufacturer’s warranty. Regular use of other size modes (e.g.: Super Live) will prevent permanent retention.

• T he recording fun ction has been designed for private use and entertainment in your home environment. Please note that any commercial use of the recording function could lead to copyright infringeme nt of authors’ rights. Toshiba asks you to respect the intellectual property rights of third parties.

• Before recording to a device connected to the TV, make a test recording and check the recording performance.

• Programmes that are prohibited from copying due to copyrigh t protection cannot be recorded.

• Toshiba shall not be liable for compensation or incidental damages of any kind whatsoever resulting from content that was not properly recorded on the recording device or that was modified or lost.

• Toshiba shall not be liable for damages of any kind whatsoever (breakdown of the recording device, modification or loss of the recorded content, etc.) resulting from malfunction, operating failu re or incorrect operati on due to combining with another connected device.

• If you connect a USB HDD that has been used with a PC or another TV, only programmes which are recorded using this TV can be playback.

• Switch the TV to standby before you disconnect the USB HDD.

Not doing so may result in loss of the recorded data or malfunction of the USB HDD.

• Please note that recording on the USB HDD is no longer playable after the TV’s main-board is exchanged during service.

Please take note

EXCLUSION CLAUSE

Toshiba shall under no circumstances be liable for loss and/or damage to the product caused by: i) Fire;

ii) Earthquake; iii) Accidental damage; iv) Intentional misuse of the product; v) Use of the product in improper conditions; vi) Loss and/or damage caused to the product whilst in the possession of a third party; vii) Any damage or loss caused as a result of the owner’s failure and/or neglect to follow the instructions set out in the

owner’s manual;

viii)Any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously

with associated equipment;

Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product.

When Using a USB Hard Drive (HDD)

English

INSTALLING YOUR TV

The remote control

Simple at-a-glance reference of your remote control.

1 For On/Standby mode 2 To select external input sources 3 To select TV Mode 4 Selectable Picture 5 Widescreen viewing 6 Picture still 7 Digital Subtitles or Analogue TEXT Subtitle pages if

available

s Stereo/bilingual transmissions

9 To access the sleep timer 10 Number buttons 11 To switch the Audio Description On/Off 12 To return to previous channel 13 To display on-screen information

To access the index page in Text mode

14 To alter the TV volume 15 To change programme positions

To change TEXT pages

16 To mute the TV sound 17 To access Quick Menu 18 - Accesses the Search Portal

19 - Accesses the CLOUD HOME 20 - Accesses to premium content available

online

21 To access the on-screen Menu 22 To display the digital on-screen Programme Guide 23 To page up, down, left or right 24 When using menus, the arrows move the cursor on the

screen up, down, left or right. Press OK to confirm your selection

25 To return to previous Menu 26 To exit menus and applications 27 When in TV mode:

D Analogue time display

When in Text mode:

A To reveal concealed text B To hold a wanted page C To enlarge text display size D To erase Text pages temporarily when you

are viewing in teletext mode.

During Playback:

c To PLAY v To STOP W To PAUSE Z To SKIP-BACK CC To REWIND cc To FAST FORWARD z To SKIP FORWARD

28 To access the analogue or digital Channel List 29 To call up text services 30 To record DTV programmes 31 Colour buttons: Text and interactive service control

buttons

Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the proper way. Suitable battery types for this remote control are AAA, IEC R03 1.5 V.

Do not combine a used, old battery with a new one or mix

battery types. Remove exhausted batteries immediately to prevent acid from leaking into the battery compartment. Dispose of them in accordance with instructions on page 92 of this manual.

Warning: Batteries must not be exposed to excessive heat such as sunshine, fire or the like.

The performance of the remote control will deteriorate beyond a distance of five metres or outside an angle of 30 degrees from the centre of the television. If the operating range becomes reduced, the batteries may need replacing.

1 2 4 5 7

11 13

14 16

18 19 21

27 28

3 6

8 9

17 20

24 26

Inserting batteries and effective range

English

CONNECTING YOUR TV

Connecting external equipment

Before connect i ng any external equipment , tur n of f all ma in po wer sw i tc hes. If there is no switch, remove the mains plug from the wall socket.

Aerial cables: . . . . . . . . . . . . . . . . . . . . . . . .

Connect the aerial to the socket on the rear of the TV. If you use a decoder and/or a media recorder, it is essential that the aerial cable is connected through the decoder and/or through the media recorder to the TV.

Satellite cabl e: . . . . . . . . . . . . . . . . . . . . . . .

Connect the LNB from the satellite dish to the SATELLITE ANTENNA socket on the TV. You can receive TV, radio, interactive TV, and HD TV with clear reception.

SCART leads: . . . . . . . . . . . . . . . . . . . . . . . .

Connect the media recorder IN/OUT socket to the television. Connect the decoder TV socket to the television.

Before running Auto Tuning, put yo ur deco der and media recorder to Standby.

The RCA sockets alongside the COMPONENT VIDEO INPUT sockets will accept L and R audio signals.

When connecting the VI DEO/A UD IO devic es, conn ect those cables to Y/L/R sockets.

The Digital Audio Output socket enables the connection of a suitable surround sound system.

NOTE: This output is always active.

HDMI

(High-Definition Multimedia Interface) is for use with electrical equipment with digital audio and video output. It is designed for best performance with 1080i and 1080p high-definit ion vi deo signals but will al so acce pt and display VGA, 480i, 480p, 576i, 576p and 720p signals.

PC format signals will also be displayed. NOTE: Although this television is able to connect to HDMI

equipment, it is possible that some equipment may not operate correctly.

LAN port is used to connect the TV to your home network. A wide variety of external equipment can be

connected to the back of the television; therefore, the relevant owner’s man uals for all additional equipment must be referred to for exact instru ctions.

If the television automatically switches over to monitor external equipment, return to normal television by pressing the desired programme position button. To recall external equipment, press

o to select between TV,

EXT 1, EXT 2, HDMI 1, HDMI 2, HDMI 3, HDMI 4 or PC.

When the external input mode is selected while viewing DTV mode, the SCART socket does not output video/ audio signals.

ILLUSTRATION SHOWS 32L.

Power cord

Satellite dish

Aerial Cable

* A Decoder can be digital Satellite, free to air or any

other compatible decoder / recorder.

Decoder*

LAN port

COMPONENT VIDEO/AUDIO INPUT

VIDEO/AUDIO INPUT (Y/L/R) (EXT 2)

SCART (EXT 1)

DVB Common Interface (for Conditional Access Module (CAM))

Headphones

HDMI (1~3)

USB (1~2)

HDMI 4 INPUT DIGITAL AUDIO OUTPUT

(OPTICAL)

RGB/PC INPUT LNB IN SATELLITE ANTENNA

(L436* series only) Aerial

English

CONNECTING YOUR TV

Connecting an HDMI® device

The HDMI inpu t on your television rece ives digital audio and uncompressed digit al vi de o from an HDMI source device.

This input is designed to accept HDCP (High-Bandwidth Digital Content Protection) programme material in digital form from EIA/CEA- 861-D–compl iant cons umer elect ronic devices (such as a set-top box or DVD player with HDMI output). For acceptable video signal formats, see page 88.

NOTE: Supported Audio format: Linear PCM, Dolby Digital (AC-3), sampling rate 32/44.1/48 kHz.

Connect an HDMI cable (type A connector) to the HDMI terminal.

For proper operation, it is recommended that you use an HDMI cable with the HDMI Logo ( ).

• If your HDMI connection is capable of 1080p and/or your television is capable of refresh rates greater than 50 Hz, you will need a Category 2 cable. Conventional HDMI/ DVI cable may not work properly with this model.

• HDMI cable transfers both video and audio. Separate analogue audio cables are not required (see illustration).

To view the HDMI device video, press

o to select

HDMI 1, HDMI 2, HDMI 3 or HDMI 4 mode.

This feature enables the audio signal of the TV to be sent to the AV amplifier via the HDMI cable. It will not be necessary to connect a cable from the audio output of the TV to the audio input of the AV amplifier to reproduce the audio received from the tuner of the TV through the AV amplifier.

To connect an HDMI device

the back and side of your television

HDMI device

HDMI cable

HDMI’s ARC (Audio Return Channel)

feature

the sid e of your television

HDMI cable

AV amplifier that supports ARC

English

CONNECTING YOUR TV

Connecting an HDMI CEC Control compatible device

You can control the basic functions of connected audio/video devices using the television’s remote control if you connect an HDMI CEC compatible AV amplifier or playback device. For an explanation of setup and oper at io ns , se e pages 80–81.

For the setup shown above, you will need three HDMI cables.

NOTE:

• If several devices are connected, the HDMI CEC Control feature may not operate properly.

• For proper operation, it is recommended that you use HDMI cables with the HDMI Logo ( ).

• This function is available when one PC and one AV amplifier are connected separately. However, it may not operate properly if the PC is connected via the AV amplifier.

Before controlling the device(s):

• After completing the above connections, set the HDMI CEC Control Setup menu as you desire (see page 80).

• The connected devices must also be set. For details, see the operation manual for each device.

• The HDMI CEC Control feature uses CEC technology as regulated by the HDMI standard.

• This feature is limited to models incorporating Toshiba’s HDMI CEC Control. However, Toshiba is not liable for those operations. Refer to individual instruction manuals for compatibility information.

the side of your television

AV amplifier

Playback device

English

CONNECTING YOUR TV

Connecting a computer

With either an HDMI or an RGB/PC connection, you can watch your comp uter’s di splay on the television.

When connecting a PC to the HDMI terminal on the television, use an HDMI cable (type A connector).

If connecting a PC with DVI terminal, use an HDMI-to-DVI adaptor cable.

For acceptable PC and video signal formats, see page 88.

NOTE:

• The edges of the images may be hidden.

• If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly.

When connecting a PC to the RGB/PC terminal on the television, use an analogue RGB (15-pin) computer cable.

To use a PC, set the monitor output resolution on the PC before connecting it to the television. For acceptable PC signal formats, see page 87.

To display the optimum picture, use the PC setting feature (see page 77).

NOTE:

• Some PC models cannot be connected to this television.

• An adaptor is not needed for computers wit h a compatible mini D-sub15-pin terminal.

• Depending on the DVD’s title and the specifications of the PC on which you are playing the DVD-Video, some scenes may be skipped or you may not be able to pause during multi-angle scenes.

• A band may appear at the edges of the screen or parts of the picture may be obscured. This is due to scaling of the picture by the set, it is not a malfunction.

• When PC input mode is selected, some of the television’s features w ill be unavai lab le e.g. Colour System in the Options menu.

• Some PC models may output unique signals that the television may be unable to detect (see page 87).

• If connecting a certain PC model with a unique PC signal, the PC signal may not be detected correctly.

To connect a PC to the HDMI

terminal

the sid e of your television

Computer

HDMI cable

the sid e of your television

Computer

HDMI-to-DVI

adaptor cable

To connect a PC to the RGB/PC

terminal

the back of your television

Computer

Mini D-sub 15 pin connector

RGB PC cable

(not supplied)

Conversion adaptor i f require d (not supplied)

English

CONNECTING YOUR TV

Connecting a home network

The LAN port allows your Toshiba TV to connect to your home network. You can use this revolutionary home entertainment networking system to acce ss photo, video and audio files that are stored on a med i a server an d play/ display them on yo ur TV.

NOTE:

• If you connect to a shared network outside your home, it is advisable to use a router. Always use network media products in private network environments. Connect this TV to the same router as other network media products (server).

• If you use a hub or switch to connect the TV to your home network, you may not be able to use the automatic setup and will have to manually set up the network address. See page 42.

• If you use a router with built-in DHCP functionality, use the automatic setup. Manual setup may not work.

• If you connect the TV and PC directly, use a crossover LAN cable.

• Please consult your PC manufacturer about details of PC settings.

• Wireless appliances may interfere with Intel

Wireless

Display.

[1] Coaxial or telephone cable (depending on your modem type) [2] Standard LAN cable [3] Do NOT connect a phone jack directly to the TV’s LAN port.

Warning: This TV complies with the EMC directive only when you use a shielded Cat5 ethernet cable.

Please refer to “Wireless Setup” section on page 39.

NOTE:

• If this device is going to be operated in the frequency range of 5.15 GHz to 5.35 GHz, it is restricted to indoor use.

• If this device is going to be operated for 802.11 b/g/n function in the frequency range of 2.454 GHz to

2.4835 GHz in France, it is restricted to indoor use.

• A general authorization is required for using this device outdoors or in public places in Italy.

• This device is NOT ALLOWED to be used in the geographical area within a radius of 20 km from the centre of Ny-Alesund in Norway.

• Make the wireless LAN appropriate security setting at the time of wireless LAN use to prevent the illegal use, spoofing and interception of communications.

• Don't connect wireless LAN to an outside network directly. Apply the wireless LAN access point with router function or broadband router. Make the router appropriate security setting to prevent the illegal use. Refer to the manual of router for a security setting.

To connect the TV to a home network

- Wired

[1] [2]

[2]

[3][2]

the back of your television

Server PC

Cable or Phone jack

Modem (if available)

Router with Hub

To connect the TV to a home network

with an internet connection - Wireless

To connect the TV to the PC with

Intel

Wireless Display

Access point (AP)

Wireless LAN router

Modem

Computer

Intel® WiDi

PC with Intel®

Wireless Display

English

CONNECTING YOUR TV

Controls and input connections

A wide variety of external equipment can be connected to the inp ut soc kets on the side of the television.

While all the ne ces sary adjustments and controls for the tel evisi on are made using th e re m ot e control, the buttons on the television may be used for some functions.

If the RED LED is not lit, check that the mains plug is connected to the power supply and press

1 on the remote

control; it may take a few moments. The GREEN LED will be lit.

To put the television into Standby, press

1 on the re mo te

control. To view the television, press

1 again. The picture

may take a few seconds to appear.

• To turn on or off the TV, press

• To alter the volume, press + or –. + and – buttons operate as volume up/down as default.

• Press

p / o repeatedly to switch the function of 2 +/

– button as below. Volume→Channel→Input→Volume

The Media Player feature provides access to photo, movie and music files stored on a USB storage device that is connected via the USB 1 or USB 2 port or on a network device.

Please always refer to the owner’s manual of the equipment to be connect ed for full deta i ls.

NOTE:

• The USB socket has limited functionality and Toshiba can take no responsibility for damage to other connected equipment.

• Interactive video games that involve shooting a “gun” at an on-screen target may not work with this TV.

The Common Interface is for a Conditional Access Module (CAM). Contact a service provider. The software updating of CI Plus CAM may be automatically executed. At this time, your Recording/ Rem i nde r programming will be cancelled.

Control panel

USB ports

Power LED On = Green Standby = Red

ILLUSTRATION SHOWS 32L.

Remote sensor

DVB COMMON INTERFACE

Media Player/USB HDD connection port

Switching on

For energy saving:

We recomm end that y ou use the television with the factory settings. The factory settings are for energy saving. Unplugging the mains plug will cut energy use to zero for all televisions. This is recommended when the television is not being used for a long time, e.g. when on holiday. Reducing the brightnes s of the screen will reduce en ergy use. Energy efficiency cuts energy consumption and can save money.

NOTE: Putting the television into Standby will reduce energy consumption, but will still draw some power.

Using the TV controls and

connections

English

CONNECTING YOUR TV

Press on the remote control to display the menu. The menu appears as a list of seven topics. As each icon

is selected by pressing

B / b on the remote control, its

respective options will appear on the right. NOTE: The same menu is displayed in DTV (Digital TV)

and ATV (Analogue TV) modes; however, where some items are not available in a mode, they will appear greyed out.

Using the menu system

Press B / b and OK or c

Picture

Picture Mode Reset Backlight Contrast Brightness Colour Tint Sharpness Advanced Picture Settings Expert Picture Setti ngs Display Settings