Toshiba IPE001Z Instruction Manual
E6581580②
TOSVERT VF-AS1/PS1 series
EtherNet/IP™ option unit Instruction Manual
IPE001Z
3. All information contained in this manual are subject to change without notice.
Pleas
e confirm the latest information on our web site “www.inverter.co.jp”.
2. Read this manual before installing or operating the EtherNet/IP™ optio
n unit. Keep
it in a safe place for reference.
1. Make sure that this instruction manual is delivered to the end use
r of
EtherNet/IP™ option unit.
NOTICE
E6581580
Safety precautions
On the inverter and in its instruction manual, important information is contained for preventing
injuries to users, damages to assets, and for proper use of the device.
Read the instruction manual attached to the inverter along with this instruction manual to
completely understand the safety precautions, the symbols and indications shown below. Please
adhere to the contents of these manuals at all times.
Explanation of markings
Marking Meaning of marking
Warning
Indicates that errors in operation may lead to death or serious injury.
Caution
Indicates that errors in operation may lead to injury (*1) to people or that these errors may
cause damage to physical property. (*2)
(*1) Such things as injury, burns or shock that will not require hospitalization or long periods of
outpatient treatment.
(*2) Physical property damage refers to wide-ranging damage to assets and materials.
Meanings of symbols
Marking Meaning of marking
Indicates prohibition (Do not do it).
What is prohibited will be described in or near the symbol in either text or picture
form.
Indicates something mandatory (must be done).
What is mandatory will be described in or near the symbol in either text or picture form.
Indicates danger or warning.
What is dangerous, or what the warning should be applied to will be described in or
near the symbol in either text or picture form.
- 1/15 -
E6581580
Limitation of use
Safety precaution
Never use this unit with any device other than TOSVERT VF-AS1/PS1 series inverters. Doing so may
cause an accident.
Handling in general
Warning
Never
Disassemble
Never disassemble, modify or repair the product.
Disassembling the product may cause electric shocks, fire or injuries.
For repairs, call your sales/repair agency.
Prohibited
Do not open the front cover on the inverter while the inverter power is on.
It may lead to electric shocks.
Do not remove this option from VF-AS1/PS1 while the power is on.
It may lead to electric shocks.
Do not put or insert foreign objects such as waste cable, bars or wires into the product.
It may lead to electric shocks or fire.
Do not splash water over the product, and do not wipe the body with a wet cloth.
It may lead to electric shocks or fire.
Mandatory
Turn off the power immediately in case of any abnormalities such as smoke, smell or
abnormal noise.
Neglect of these conditions may lead to fire.
For repairs, call your sales/repair agency.
Do not touch the sharp portions (such as leads of parts on the board, the corner of
board, or etc.) on this option.
It may lead to injuries.
Caution
Mandatory
This option is an electrostatic discharge sensitive device. Handle it, where the
environment is protected against electrostatic electricity.
Otherwise, permanent damage to device will result.
Transportation and installation
Warning
Prohibited
Do not apply a dropping shock or other physical shocks.
Otherwise, damage or malfunction will result.
Do not install or operate the inverter if it is damaged or any part of it is missing.
Operating a defective inverter may lead to electric shocks or fire.
For repairs, call your sales/repair agency.
Do not put any flammable material near the product.
It may catch fire due to the product sparking in the case of a malfunction.
Mandatory
Use this product under the environmental conditions prescribed in the instruction
manual.
Usage it under any other conditions may result in malfunction.
An emergency stop device must be installed that fits with system specifications
(e.g. shut off input power then engage mechanical brake).
Operation cannot be stopped immediately by the inverter or this unit alone, thus risking
an accident or injuries.
- 2 -
E6581580
Wiring
Caution
Mandatory
Electrical construction work must be done by a qualified expert.
Connection of input power by someone who does not have expert knowledge may
result in electric shocks or fire.
Turn off input power before wiring.
Wait at least 15 minutes and make sure that the charge lamp (on the inverter unit) is no
longer lit. Otherwise, it may lead to electric shocks.
Operations
Warning
Prohibited
Do not pull on the cable and connector.
It may cause damage or malfunctions.
Mandatory
Use this option under the environment specified in the instruction manual.
Usage under the environment other than them may cause damages or malfunctions or
an accident.
Use an additional safety device with your inverter or system to prevent a serious
accident due to the unit malfunctions.
Usage without an additional safety device may cause an accident.
Caution
Mandatory
Set up “Communication error trip function (see below)” to stop the inverter when the
option unit is deactivated by an unusual event such as an operating error, power
outage, failure, etc.
- Network time-out (f850)
(See the VF-AS1/PS1 EtherNet/IP™ Communication Function Manual for details.)
Deactivated option unit may cause an accident, if the “Communication error trip
function” is not properly set up.
Make sure that the operation signals are STOP before resetting inverter’s fault. The
motor may suddenly start and that may result in injuries.
Disposal
Caution
Mandatory
If you dispose off this unit, have it done by a specialist in industrial waste disposal*.
Improper disposal may result in explosion of capacitors or produce noxious gases,
resulting in injuries.
(*) Persons who specialize in the processing of waste and known as “Industrial Waste
Product Collectors and Transporters” or “Industrial Waste Disposal Persons.” If the
collection, transport and disposal of industrial waste is done by someone who is not
licensed for that job, it is a punishable violation of the law (Laws in regard to cleaning
and processing of waste materials).
Notes on operation
Notes
Avoid installing in a place where ambient temperature or/and humidity change sharply.
Keep the transmission cable separate from the power cable of the inverter to prevent the
inverter from malfunctioning due to electromagnetic noise.
- 3 -
E6581580
Preface
Thank you for purchasing the “EtherNet/IP™ option (IPE001Z)” for TOSVERT
VF-AS1/PS1 inverter. By installing this board into the VF-AS1/PS1, data
communication can be made with a host computer or other device via
EtherNet/IP™
network.
Before using this unit, carefully read and understand the safety precautions, this
manual and the inverter instruction manual. This way you can utilize the excellent
performance of this unit. Besides this instruction manual, the “
EtherNet/IP™ option
Function Manual” which includes the contents to install into
EtherNet/IP™ network is
prepared. If it is required, please contact with our branch offices, sales offices or web
site “www.inverter.co.jp”.
(“
EtherNet/IP™ option Function Manual”: E6581581)
After reading this instruction manual, please keep it handy for future reference.
EtherNet/IP™ is a trademark of ControlNet International, Ltd.
*
IPE001Z is applicable for VF-AS1(software version V150 or later) and
VF-PS1(software version V650 or later).
- Part numbering
IPE 001 Z
–
0
Revision number
Cable length ( “Z” means “without cable” )
Model number of
EtherNet/IP™ option
Symbol of
Ethernet option
- Accessory check list
EtherNet/IP™ communication option is shipped together with the following accessories. On
opening the packing case, check to see if the following accessories are contained or not.
(1)
EtherNet/IP™ option (IPE001Z)....... 1 board
(2) Instruction manual for the VF-AS1/PS1
EtherNet/IP™ option.....1 copy
Manual
English: E6581580
(This manual)
(3) LED name label 1 sheet
- 4 -
Loading...