Toshiba HT-201 User Manual
Model number HT-201
IllustrationsinthisinstructionmanualareschematicfiguresofthisProduct.
・Product name
・Model number
・Generic name
・Supply voltage
・Battery life
・Temperature
display
・Measurement
precision
・Measurement
method
Digital Clinical Thermometer
HT-201
Electronic thermometer
DC 3 V (CR2032 battery × 1 pc)
Approx. 1 year (under the usage condition of
room temperature 23ºC, measurement for
7 minutes 1 time/day, data transfer 1 time/day)
Four-digit with ºC display in increments of 0.01ºC
± 0.05ºC (35.00 to 38.00ºC)
± 0.10ºC (33.00 to 34.99ºC, 38.01 to 42.00ºC)
(measured in a constant temperature water
tank at a normal room temperature of 23ºC)
Predictive-type (compatible with predictive
temperature measurement and actual
temperature measurement)
[Thermometer Main Unit]
Operation button
Measurement area
[Stored State]
Storage case
For Correct Measurement
● Make sure that the temperature is taken at the base of tongue.
● Please refrain from using this Product after eating or drinking.
● Please refrain from using this Product after exercise.
Thank you for purchasing this Digital Clinical Thermometer.To use this Digital Clinical
Thermometer correctly and safely,please read all of the instruction manual provided by
TOSHIBA carefully and keep in mind the before using this Product.
After reading the manual, please keep it at hand so that others can refer it at any time.
* Specialized smartphone application is available. Visit the following site to confirm.
http://www.toshiba.co.jp/healthcare/bbt/en/index_e.htm
* The information in the Manual (except for product specification and design) may be changed
without prior notice.
Specifications
Part Names
Battery cover
See the reverse side of
this document for how to
replace a battery.
・Measurement
・Usage Environment
temperature and
humidity
・Storage Environment
temperature and
humidity
・Main unit’s weight
・Outline Dimensions
・Accessories
range
33.00 to 42.00ºC
Ambient temperature: + 10 to + 40ºC
Relative humidity: 30 to 85% RH
(without condensation)
Ambient temperature: - 10 to + 50ºC
Relative humidity: 30 to 90% RH
(without condensation)
:Approx. 20 g (including battery)
:Approx. 46 (W) × 99.5 (L) × 11 (T) mm
Temporary CR2032 lithium battery
(installed in the product ):1pc,
Storage case :1pc,
Instruction manual :1pc
Display
Body Temperature Transfer Symbol
Shows the state ready to transfer body temperature data to your
smartphone.
Previous Value Memory Symbol
Shows the body temperature value measured last time.
Remaining Battery Symbol
Shows the remaining battery level in four increments.
Predictive Symbol
Shows a temperature value that is measured by the predictive
function.
Safety Precautions Be sure to observe the following precautions
This section lists important precautions that users of this Product (and anyone else) should observe in order to avoid injury to you and any third person and damage to property.
■ Explanation of Labels
IIndicates “a hazardous situation which, if not observed,
could result in death or serious injury”.
Indicates “a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury or
cause property damage”.
■
Explanation of Graphic Symbols
Indicates “prohibited actions” within or near the
graphic symbol using an appropriate picture or
Prohibited
Instruction
text.
Indicates “actions that must be undertaken for
safety purposes” by using an appropriate picture
or text within or near the graphic symbol.
ThisProductisnotintendedtodiagnoseanydisease.Pleasedonotusethemeasurementresultto
diagnosebyyourselfandconsultwithamedicaldoctorifyoudonotfeelwell.
Do not allow children to use, and keep this Product out
of reach from small children.
If you allow this Product to use small children, this Product
may cause their injury.
Prohibited
Do not use this Product for any purposes other than
taking your body temperature.
(Using this Product on other living things such as your pets
or other animals may cause their injury.)
Do not take your body temperature anywhere other
than in-oral (armpit, ear, etc.).
(Using this Product in areas other than the mouth may cause
your injury or result an incorrect measurement.)
This Product is exclusively designed for oral use.
Do not share this Product among multiple persons.
(Attempting to do so could cause infectious disease.)
Do not disassemble, repair or modify this Product. Use a battery designated in the Manual.
( Attempting to do so may cause trouble or damage of
this Product and result an incorrect measurement. )
Prohibited Instruction
Prohibited
Do not bite or bite off the measurement area of this Product.
(Attempting to do so may cause an accident such as accidental swallowing.)
In case of accidental swallowing, consult with a medical doctor immediately.
Do not heat the battery or place the battery in a fire.
(Attempting to do so may cause injury due to battery rupture or similar.)
Do not attempt to self-diagnose or self-treatment based on
the measurement result.
(Attempting to do so may cause worsening of symptoms.)
Please consult with a doctor when seeking medical attention.
Keep batteries or the battery cover out of reach from small
children.
(To prevent small children from swallowing batteries or the battery cover
accidentally.) If this Product is swallowed, consult with a medical doctor
immediately.
(Using an undesignated battery may cause injury and disaster
due to heat generation, rupture, leakage, or ignition of the battery.)
Set the battery in this Product correctly so that “+” and “-“
are in their proper positions.
( Incorrect setting of the battery may cause injury and disaster
due to heat generation, rupture, leakage, or ignition of the battery.)
Usage Precautions
Do not take your body temperature by using this Product that has been
stored outside the range of the storage environment temperatures as
set the above.
(Storage outside the range of the storage environment temperatures may
cause trouble of this Product and result an incorrect measurement.)
Do not use this Product in a place where a strong static discharge or
electromagnetic radiation occurs, or near a magnet.
(Such usage may cause trouble or damage to this Product and result an
incorrect measurement.)
Do not drop, step on or otherwise apply a strong shock to this
Product or the storage case.
(Such usage may cause trouble or damage to this Product and result
an incorrect measurement.)
Be careful so that fluid or water does not enter into this Product.
(This Product is not designed as fully waterproof. Entry of water into
this Product may cause trouble of this Product.)
Warranty
1. The warranty period is one year from the date of your purchase of this
Product. If trouble occurs under your normal use to follow the Manual,
Toshiba will replace such defective Product with a new or an equivalent
product. Any documents evidencing your purchase of this Product, including
purchase date and location must be provided to Toshiba for replacement.
Keep such documents in a safe place.
2. Toshiba will in no event be responsible for the deletion of any data or
application stored on this Product.
3. In case of the trouble this Product occurs within warranty period as
set forth in the above, please contact Toshiba customer service.
4. Even within warranty period as set forth in the above, in case that
one of the following occurs, Toshiba provides you with repair or
replacement service, subject to your payment of Toshiba’s
designated fee .
・Failure or damage caused by improper use, storage, or this Product
tampering and repair.
・Failure or damage caused by drops or shock.
・Failure or damage caused by disasters(fire, flood, earthquake) or
a Force Majeure.
・Failure or damage unrelated to this Product.
・Consumables. (battery, storage case)
How to Take Your Temperature How to replace the battery
Completion of data deletion
Power Off (Blank screen)
Completion of actual
temperature measurement
Remaining battery symbol
[Display]
10 seconds.
[Back Side of Main Unit]
● Take your body temperature as soon as you wake up and while youare still in bed.
( Measurement after getting up or a meal may result an incorrect measurement. )
● Whenever you measure your body temperature by using this Product, please measure
the same point in your mouth
● Measurement should be conducted by using this Product at the same time every
morning to the extent possible
1.
Take Out this Product from the Storage Case. Push the Operation Button at least One Second.
Whole symbols on the screen
• The power turns on and the display indicates all symbols with a beeper sound.
• The previous value is displayed, and then “ ” is displayed.
• When the ambient temperature exceeds 33ºC, the product may display the ambient
Previous value is displayed.
temperature due to a warm measurement area.In such cases, turn off the power once and cool the measurement
area, and then take your temperature.
2.
When this Product Displays “Lo” , Place the Measurement Area on Either the Right or Left
Estimation measurement starts.
Side of the Base of Your Tongue with the Display of this Product upwardly. Hold this Product
with Your Tongue and Shut Your Mouth. Hold this Product with Your Hand to prevent the
Mesurement Point in Your Mouth.
• When a beeper sound goes off in approximately one minute and “ºC” is indicated on the display, an predictive
measurement is successfully completed.Check your body temperature measurement result
• Measurement in an incorrect manner may result an incorrect measurement.
Turn Off the Power by Pushing the Operation Button for at least One Second.
3.
• The power is automatically shut down after a certain period of time lapse even if the operation button is
not pushed.
4.
Put this Product into the Storage Case.
( predictive temperature value ).
Under taking a temperature
Completion of estimation
measurement
■Actual Measurement
* If you want to measure your body temperature strictly, we recommend that you should take an actual body
temperature.Keep on taking your body temperature after the beeper sound in step 2 above. The actual temperature
measurement is successfully completed when the beeper sound goes off once again after approximately 5 minutes
lapse. Check the result of the actual measurement and continue with steps 3 and 4 above.
■Transfer your body temperature data in this Product to your smartphone
● If “ ” is displayed, data transfer to your smartphone is available.
For details, following web site : http://www.toshiba.co.jp/healthcare/bbt/en/index_e.htm
■Delete your body temperature data in this Product
● Push the operation button of this Product at least 10 seconds while this Product is powered on.
Upon pushing the operation button even after this Product is powered off, four “□ ” are displayed and your body
temperature data in this Product is deleted. If you release the operation button before four “□ ” are displayed, the
data will not be deleted.
How to Clean
● Use a dry, soft cloth when removing stains from the product.
● Darker stains may be removed by using a soft cloth slightly moistened with water or alcohol.
●Please observe the following precautions. Cleaning this Product without observing the precautions may cause the trouble of this Product .
• The thermometer is not designed for fully waterproof. When removing stains, please be careful to prevent water and alcohol from entering into
this Product and keep them away from the display.
• Do not soak the measurement area in alcohol or water at than 50ºC or higher to sterilize it. Do not clean the measurement area by using ultrasonic cleaning.
• Do not use thinner, benzine, or abrasive cleaner to clean this Product.
• This Product is waterproofed from measurement area to 5cm away from it only. Keep the operation button and battery to prevent the water.
How to Store
● Dry this Proudct by using a dry cloth before storing it in the storage case.
● If you do not intend to use this Product for a long period, be sure to remove the battery before storage.
● Storage in the places below may cause the trouble of this Product.
• Dusty places. Places subjected to direct sunlight, high-temperature or high-humidity. Places subjected to water or water splashes.
• Places where a corrosive gas is generated. Places subjected to vibration and shock.
PiPi PiPi
PiPi
PiPiPi
PiPiPi
PiPiPi
Upon pushing the operation button, the remaining battery is indicated in four levels
such as “ > > > ” (battery level low). Replace the battery
promptly in accordance with the following procedures when “ ” is indicated.
Measurement is impossible when “ ” is indicated.*Enclosed battery when
Piii
you purchase this Product is for the temporary use and it may run out faster than usual.
■ Battery Replacement Procedure (CR2032 lithium battery × 1 pc)
1. Insert a Pointed Object, Such as a Tooth Pick, into the Hole on the Back Side
of this Product (Fig.1), Slide Out the Battery Cover by Using the Pointed
Object (Fig.2), andPull Out the Battery Cover (Fig.3).
2. Remove the Old Battery (Fig.4).
3. Wait for About at least approximately 10 Seconds to Prevent Malfunction of this
Product, And Then Set the New Battery with the “+” Side Upwardly (Fig.5).
※Please do not insert a battery directly into this Product. It may cause trouble of this Product.
4. Attach the Battery Cover So That the cover is Inserted into this Product (Fig.6).
Old battery
Hole (Two points)
(1)
(2)
New battery
(4)
(3)
Wait for
(5)
(6)
5. Push the Operation Button and Check that “ ” is Displayed.
■ Precautions in Replacing a Battery
● Replacing the battery deletes your body temperature data stored in this Product. Transfer the temperature data to your smartphone
before replacing the battery.
● When disposing of a used battery, please follow all applicable laws and regulations in which it is being used.
● Keep batteries and the battery cover away from small children to prevent their accidental swallowing.
Troubleshooting
Problem Probable Cause Remedy
Scattering in measurement
values
“Er.03” is displayed.
Placed the measurement area in different
positions for each measurement or opened
your mouth during measurement.
A trouble has occurred in this Product during
predictive temperature measurement.
“Er.11 to 19” is displayed. Measurement has not been conducted in the
correct manner.
“A.Hi” is displayed. The thermometer has been stored in a place
where the temperature is higher than +40ºC.
“A.Lo” is displayed. The thermometer has been stored in a place
where the temperature is lower than +10ºC.
“Hi” is displayed. The measurement result exceeded +42ºC.
“Lo” is displayed.
Other than above cases. The thermometer has failed. Please visit our website for FAQ
Nothing is displayed on the
display.
The power can not be turned on.
The measurement result was +33ºC or less.
・The battery has run out.
・The thermometer has failed.
Battery of this Product is not properly seated. If power cannot be turned on, remove the battery once
● For support of this Product , please check our following site.
http://www.toshiba.co.jp/healthcare/bbt/en/index_e.htm
See the “ For Correct Measurement ” and ” How To Take
Your Temperature ”.
See the “ For Correct Measurement ”and ” How To Take Your
Temperature ”. A Ｐredictive measurement value is not correctly
estimated if the measurement area is taken out of your mouth
during predictive temperature measurement.
Keep on measurement ( foractual temperature measurement )
or turn off the power of this Product once and take your body
temperature again after at least 30 seconds lapse.
See the “ For Correct Measurement ” and ” How To Take Your
Temperature ”.Turn off the power of this Product once and take
your body temperature again after at least 30 seconds lapse.
Take your body temperature again after placing this Product in a
+10 to +40ºC environment for at least one minute
Take your body temperature again after placing the thermometer in a
+10 to +40ºC environment for at least one minute .
See the “ For Correct Measurement ”and ” How To Take Your
Temperature ”.
See the “ For Correct Measurement ”and ” How To Take Your
Temperature ”.
Replace the old battery with a new one. If the power
does not turn on even after the battery has been
replaced, please visit our website for FAQ
and insert it again after 5 minutes lapse.
Loading...