Toshiba D-KVR20U, D-KVR20KU Owner's Manual

D-KVR20KU

Printed in China

1VMN26073 / E9KGBUD

TOSHIBA DVD VIDEO RECORDER / VIDEO CASSETTE RECORDER

© 2008 Toshiba Corporation

Owner’s Record

The model number and serial number are on the back

of your DVD Recorder. Record these numbers in the spaces

below. Refer to these numbers whenever you

communicate with your Toshiba dealer about this DVD

Recorder.

Model number:

Serial number:

D-KVR20KU

DVD VIDEO RECORDER / VIDEO CASSETTE RECORDER

OWNER’S MANUAL

Disc

Management

Recording PlaybackIntroduction Connections Basic Setup Editing Function Setup VCR Function Others

E9KGBUD_D-KVR20KU_cover.indd 2-3E9KGBUD_D-KVR20KU_cover.indd 2-3 2008/05/28 16:53:502008/05/28 16:53:50

2EN2EN

PRECAUTIONS

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device,
due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE

SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION:

VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK MECHANISM.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPLIANCE TO RAIN OR MOISTURE.

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.

CAUTION

:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this

equipment may cause harmful interference unless the modifications are expressly approved in the manual. The
user could lose the authority to operate this equipment if an unauthorized change or modification is made.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance
with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations
concerning chemical wastes.

Make your contribution to the environment!!!

• Used up batteries do not belong in the dust bin.

• You can dispose of them at a collection point for used up batteries or special waste.
Contact your council for details.

The caution marking is located on the rear of the cabinet.

ATTENTION:

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND

.

Laser Safety

E9KGBUD_D-KVR20KU_EN.indd 2E9KGBUD_D-KVR20KU_EN.indd 2 2008/05/27 16:10:022008/05/27 16:10:02

3EN 3EN

Disc

Management

Recording Playback

Introduction

Connections Basic Setup Editing Function Setup VCR Function Others

PRECAUTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators,

heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched

particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.

11. Only use attachments/accessories specified by the

manufacturer.

12. Use only with the cart, stand, tripod,

bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/
apparatus combination to avoid injury
from tip-over.

13. Unplug this apparatus and disconnect the antenna or

cable system during lightning storms or when unused
for long periods of time.

14. Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.

15. Do not overload wall outlets; extension cords, or integral

convenience receptacles as this can result in a risk of fire
or electric shock.

16. Never expose the apparatus to dripping or splashing or

place items such as vases, aquariums, any other item
filled with liquid, or candles on top of the unit.

17.

Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do so may cause serious personal injury.

18. Do not place anything on top of this unit.

19. Do not place the apparatus on amplifiers or equipment
that may produce heat.

20. Never block or cover the slots or openings in the unit.
Never place the unit:

• on a bed, sofa, rug, or similar surface;

• too close to drapes, curtains, or walls; or

• in a confined space such as a bookcase, built-in cabinet,

or any other place with poor ventilation.
The slots and openings are provided to protect the unit
from overheating and to help maintain reliable operation.

21. Do not use a cracked, deformed, or repaired disc. These
discs are easily broken and may cause serious personal
injury and apparatus malfunction.

22. If the apparatus should emit smoke or an unusual odor,
immediately disconnect the power cord from the wall
outlet. Wait until the smoke or smell stops, then ask your
dealer for a check and repair. Neglecting to do so may
cause fire.

23. During thunderstorms, do not touch the connecting
cables or the apparatus.

24.

DANGER: RISK OF SERIOUS

PERSONAL INJURY OR DEATH!

• Use extreme care to make sure you are never in a

position where your body (or any item you are in
contact with, such as a ladder or screwdriver) can
accidentally touch overhead power lines. Never locate
the antenna near overhead power lines or other
electrical circuits.

• Never attempt to install any of the following during

lightning activity: a) an antenna system; or b) cables,
wires, or any home theater component connected to an
antenna or phone system.

25. Always make sure the antenna system is properly
grounded to provide adequate protection against
voltage surges and built-up static charges (see Section
810 of the National Electric Code).

IMPORTANT SAFETY INSTRUCTIONS

EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE

ANTENNA
LEAD
WIRE

ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)

GROUNDING CONDUCTORS
(NEC SECTION 810-21)

GROUND
CLAMP

GROUND CLAMP

ELECTRIC
SERVICE
EQUIPMENT

POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)

NEC – NATIONAL ELECTRICAL CODE

S2898A

This unit has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard.
The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and
servicing. This unit is fully transistorized and does not contain any parts that can be repaired by the user.

DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL ONLY.

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing
or climbing on it. A falling unit can cause serious injury or even death.

E9KGBUD_D-KVR20KU_EN.indd 3E9KGBUD_D-KVR20KU_EN.indd 3 2008/05/27 16:10:032008/05/27 16:10:03

4EN4EN

PRECAUTIONS

The unauthorized recording, use, distribution, or revision
of television programs, videotapes, DVDs and other
materials, is prohibited under the copyright laws of the
United States and other countries, and may subject you
to civil and/or criminal liability.
This product incorporates copyright protection
technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright
protection technology must be authorized by
Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly is
prohibited.

Moisture condensation may occur inside the unit when it
is moved from a cold place to a warm place or after
heating a cold room or under conditions of high
humidity. Do not use this unit at least for 2 hours until its
inside gets dry.

Consumers should note that not all high definition
television sets are fully compatible with this product and
may cause artifacts to be displayed in the picture. In case
of picture problems with 480 progressive scan output, it
is recommended that the user switch the connection to
the “standard definition” output. If there are questions
regarding your TV set compatibility with this 480p DVD
recorder, please contact Toshiba Customer Service.

For safety and optimum performance of this unit:

• Install the unit in a horizontal and stable position. Do
not place anything directly on top of the unit. Do not
place the unit directly on top of the TV.

• Shield it from direct sunlight and keep it away from
devices of intense heat. Avoid dusty or humid places.
Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes on
the sides of the unit. Avoid locations subject to strong
vibration or strong magnetic fields.

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it
from AC outlet. Grasp it by the plug.

• If, by accident, water is spilled on this unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.

Supplied Accessories

remote control with batteries (AAx2)

Installation Location

Avoid the Hazards of Electrical Shock and Fire

Moisture Condensation Warning

About Copyright

Notice for Progressive Scan Output

RCA audio/video cables

HDMI cable

owner’s manual

quick setup guide

OWNER’S MANUAL

return stop sheet

E9KGBUD_D-KVR20KU_EN.indd 4E9KGBUD_D-KVR20KU_EN.indd 4 2008/05/27 16:10:042008/05/27 16:10:04

5EN 5EN

Disc

Management

Recording Playback

Introduction

Connections Basic Setup Editing Function Setup VCR Function Others

PRECAUTIONS

Servicing

• Please refer to relevant topics on “TROUBLESHOOTING”
on pages 102-105 before returning the product.

• If you need to call a customer service representative,
please know the model number and serial number of
your product before you call. This information is
displayed on the back of the product. Also, please take
a moment to identify the problem you are having, and
be prepared to explain this to the representative. If you
believe the representative will need to help you with
operations, please stay near the product. Our
representatives will be happy to assist you.

Cleaning the Cabinet

• Wipe the front panel and other exterior surfaces of the
unit with a soft, slightly damp cloth.

• Never use a solvent, thinner, benzene or alcohol to
clean the unit. Do not spray insecticide liquid near the
unit. Such chemicals may discolor the surface or
damage the unit.

Cleaning Discs

• When a disc becomes dirty, clean it with a cleaning
cloth. Wipe the disc from the center to out. Do not
wipe in a circular motion.

• Do not use solvents such as benzine, thinner,
commercially available cleaners, detergent, abrasive
cleaning agents or antistatic spray intended for analog
records.

Cleaning the Disc Lens

• If this unit still does not perform properly although you
refer to the relevant sections and to
“TROUBLESHOOTING” in this owner’s manual, the laser
optical pickup unit may be dirty. Consult your dealer or
an Authorized Service Center for inspection and
cleaning of the laser optical pickup unit.

Disc Handling

• Handle the discs so that fingerprints and dust do not
adhere to the surfaces of the discs.

• Always store the disc in its protective case when it is
not used.

Auto Head Cleaning

• Automatically cleans video heads as you insert or
remove a cassette, so you can see a clear picture.

• Playback picture may become blurred or interrupted
while the TV program reception is clear. Dirt accumulated
on the video heads after a long period of use, or the
usage of rental or worn tapes can cause this problem. If
a streaky or snowy picture appears during playback, the
video heads in your unit may need to be cleaned.

1. Please visit your local Audio/Video store and purchase a
good quality VHS video head cleaner.

2. If a video head cleaner does not solve the problem,
please consult your dealer or an Authorized Service
Center.

Note

• Remember to read the instructions along with the
video head cleaner before use.

• Clean video heads only when problems occur.

Maintenance

If the remote control does not work properly, you can test if
the remote control sends out the infrared signal with AM
radio or a digital camera (including built-in camera of cellular
phone). It will help to define the cause of malfunction.

• With an AM radio:

Tune an AM radio to a station with no
broadcasting. Press a button on remote
control toward the radio. Sound will be
fluttering when you press any key and the
radio receives the signal. This means the
remote control is working.

• With a digital camera (including built-in camera of

cellular phone):

Direct a digital camera to remote control,
press and hold a button on remote control. If
infrared light appears through digital camera,
the remote control is working.

IR Signal Check

Dolby Digital Recording

“Dolby® Digital Recording enables consumers to record
high-quality video with stereo sound on recordable DVD
discs. The technology, when utilized instead of PCM
recording, also saves recordable disc space, allowing for
higher video resolution or extended recording time on
each DVD. DVDs created using Dolby Digital Recording
will play back on all DVD-video players.”
Note: This is true when the players are compatible with
actual recordable DVD discs.

“WMA” (Windows Media Audio) is a new audio codec
developed by Microsoft® in the United States of America.

HDMI, the HDMI logo and High­Definition Multimedia Interface
are trademarks or registered
trademarks of HDMI Licensing
LLC.

Manufactured under license under U.S.
Patent #: 5,451,942 & other U.S. and
worldwide patents issued & pending.
DTS and DTS Digital Out are registered
trademarks and the DTS logos and
Symbol are trademarks of DTS, Inc.
©1996-2007 DTS, Inc. All Rights Reserved.

DivX, DivX Certified, and associated logos
are trademarks of DivX, Inc. and are used
under license.

Manufactured under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.

E9KGBUD_D-KVR20KU_EN.indd 5E9KGBUD_D-KVR20KU_EN.indd 5 2008/05/28 16:57:062008/05/28 16:57:06

6EN6EN

CONTENTS

Introduction

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Symbols Used in this Owner’s Manual . . . . . . . . . . . . . . .8

FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . 11

Installing the Batteries in the Remote Control . . . . . . 12

Using a Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

THE VCR / DVD RECORDER SWITCHING . . . . . . . . . . . 14

GUIDE TO ON-SCREEN DISPLAYS AND MENUS . . . . 15

On-Screen Display / Menu . . . . . . . . . . . . . . . . . . . . . . . . . 15

Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

FRONT PANEL DISPLAY GUIDE . . . . . . . . . . . . . . . . . . . 18

Connections

CONNECTION TO AN EXTERNAL TUNER. . . . . . . . . . . 19

SETTINGS FOR THE VIDEO INPUT. . . . . . . . . . . . . . . . . 20

CONNECTION TO A TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

CONNECTION TO A TV WITH AN HDMI™

COMPATIBLE PORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

CONNECTION TO AN AUDIO SYSTEM . . . . . . . . . . . . . 24

Basic Setup

INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Disc Management

FORMATTING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Choosing the Recording Format of a Brand-New

DVD-RW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Reformatting a Disc Manually . . . . . . . . . . . . . . . . . . . . . 28

SETTING A DISC TO PROTECT . . . . . . . . . . . . . . . . . . . . 29

PLAYING THE DISCS IN OTHER DVD PLAYERS . . . . . 30

Auto Finalizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Finalizing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Recording

INFORMATION ON DVD RECORDING . . . . . . . . . . . . . 33

Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Restrictions on Recording . . . . . . . . . . . . . . . . . . . . . . . . . 33

SETTINGS FOR A RECORDING . . . . . . . . . . . . . . . . . . . . 34

Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . . 34

Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Recording Audio Select (XP) . . . . . . . . . . . . . . . . . . . . . . . 35

Setting Aspect Ratio for Video Mode Recording . . . . 35

BASIC RECORDING &

ONE-TOUCH TIMER RECORDING . . . . . . . . . . . . . . . . . 36

TIMER RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . 41

SATELLITE LINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

SETTINGS FOR AN EXTERNAL DEVICE . . . . . . . . . . . . 44

Connection to an External Device. . . . . . . . . . . . . . . . . . 44

Recording from an External Device . . . . . . . . . . . . . . . . 45

DV DUBBING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Guide to DV and On-Screen Display . . . . . . . . . . . . . . . 46

DVC to DVD Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

DVC to VCR Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

DVD/VCR DUBBING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Playback

INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . 51

Structure of Disc Contents . . . . . . . . . . . . . . . . . . . . . . . . . 51

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . . 53

Playing Back an Audio CD and a CD-RW/-R

with MP3/WMA/JPEG Files . . . . . . . . . . . . . . . . . . . . . . . . 54

Playing Back a DivX® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Using the Title/Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . . 57

Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

E9KGBUD_D-KVR20KU_EN.indd 6E9KGBUD_D-KVR20KU_EN.indd 6 2008/05/27 16:10:052008/05/27 16:10:05

7EN 7EN

Disc

Management

Recording Playback

Introduction

Connections Basic Setup Editing Function Setup VCR Function Others

CONTENTS

SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Fast Forward / Fast Reverse Playback . . . . . . . . . . . . . . 58

Skipping TV Commercials During Playback. . . . . . . . . 58

Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Step by Step Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Slow Forward / Slow Reverse Playback. . . . . . . . . . . . . 59

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Chasing Playback during Recording . . . . . . . . . . . . . . . 61

Simultaneous Playback and Recording. . . . . . . . . . . . . 62

SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Title/Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

REPEAT/RANDOM/PROGRAM PLAYBACK/

SLIDE SHOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Program Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Slide Show . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

SELECTING THE FORMAT OF AUDIO AND VIDEO . . 67

Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . 67

Switching Virtual Surround System . . . . . . . . . . . . . . . . 68

Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . 68

Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Adjusting Black Level. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Editing

INFORMATION ON DISC EDITING. . . . . . . . . . . . . . . . . 70

Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Editing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

DELETING TITLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

CREATING/DELETING PLAYLIST . . . . . . . . . . . . . . . . . . 73

Adding Titles to a Playlist. . . . . . . . . . . . . . . . . . . . . . . . . . 73

Erasing All Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

EDITING DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Setting Chapter Marks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Hiding Chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Deleting a Part of a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Dividing a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Combining Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Setting or Releasing the Title Protection . . . . . . . . . . . 83

Setting or Clearing All Chapter Marks at Once. . . . . . 84

Function Setup

LIST OF THE DEFAULT SETTINGS . . . . . . . . . . . . . . . . . 85

GENERAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

DivX® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

VCR Function

VCR FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

One-touch Timer Recording (OTR) . . . . . . . . . . . . . . . . 100

Index Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Other Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Others

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . 105

LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

E9KGBUD_D-KVR20KU_EN.indd 7E9KGBUD_D-KVR20KU_EN.indd 7 2008/05/27 16:10:052008/05/27 16:10:05

8EN8EN

FEATURES

This unit not only plays back DVD, CD and cassette tape but also offers features for you to record on DVD/cassette tape and
edit them after that. The following features are offered with this unit.

DVD mode VCR mode

This unit is compatible with recording on DVD-RW which is
recordable repeatedly and DVD-R which accept the additional
recordings until the disc becomes full but not overwritable.
Also, this unit allows you to record to the cassette tape.

Up to 12 program recording:

You can program the unit to record up to 12 programs,
within a month in advance. Daily or weekly program
recordings are also available.

One-touch timer recording (OTR):

You can easily set a recording time as you prefer. Every time
[REC I] is pressed during recording, the recording time will
be increased by 30 minutes up to 8 hours. The recording
automatically stops when the recording time you set is
reached.

Dubbing mode:

You can copy a DVD to a cassette tape or copy a cassette
tape to a DVD. This function will be possible only if the DVD
or a cassette tape is not copy protected.

You cannot record on

a

cassette tape

when its erase-protection tab is removed.

DV dubbing:

This function helps you to easily dub the contents of the DVC
(digital video camcorder) to DVD, and DV (digital video) to VCR.

Left channel stereo recording:

This unit can record the sound of the left channel monaural
input as left and right channels automatically (the input
from the L2 jacks only).

Automatic chapter mark setting:

DVD mode

Chapter marks will be put on recordings as you set before
attempting to record.

Automatic title menu making:

The unit creates title menu automatically when finalizing discs.

Automatic playlist making:

The unit creates a playlist automatically after recording VR
mode DVD-RW.

Automatic title finalizing:

For video mode DVD-RW/-R and DVD+R recording, you can
finalize discs automatically after finishing all timer recordings
or at the end of the disc space if you set this in the main menu.

Recording

Deleting titles:

DVD mode

You can delete titles which you do not need anymore.

Editing

Theater surround sound in your home:

DVD mode

When connecting the unit to an amplifier or a decoder which is
compatible with Dolby Digital or DTS, you can experience the
theater surround sound from discs with surround sound system.

Quick search for what you want to watch:

You can easily find the part you want to watch using the
search function. Search for a desired point on a disc by title,
chapter/track or time.

Virtual surround system:

You can enjoy stereophonic space through your existing 2
channel stereo system.

Playing back on MP3/WMA/JPEG/DivX® files:

You can enjoy MP3/WMA/JPEG/DivX® files which are
recorded on CD-RW/-R.
DivX® files can also be recorded on DVD-RW/-R and DVD+RW/+R.

Quick search for what you want to watch:

VCR mode

You can go to a specific point on a cassette tape by entering
the exact amount of time you wish to skip.
You can easily find the part you want to watch using the index
search/time search functions. An index mark will be assigned
at the beginning of each recording you make. For time search
function, you can go to a specific point on a cassette tape by
entering the exact amount of time you wish to skip.

Playback

DVD mode

Available for playing back discs on a regular DVD player:

Recorded discs can be played back on regular DVD players,
including computer DVD drives compatible with DVD-video
playback. Although DVD+RW/+R are playable on other units
without finalization in most cases, it is recommended to
finalize in order to stabilize the performance.

Compatibility

Line through output

DVD mode VCR mode

When an external device such as cable/satellite box is
connected to L1(Rear) jacks of this unit, the signal from the
external device can be output even when the power of the
unit is off.

Progressive scan system

DVD mode

Unlike conventional interlace scanning, the progressive scan
system provides less flickering and images in higher
resolution than that of traditional television signals.

HDMI (High-Definition Multimedia Interface)

You can enjoy clearer audio/video output when connecting
this unit to a display device with an HDMI-compatible port.

Others

Symbols Used in this Owner’s Manual

To specify for what disc type each function is, we put the
following symbols at the beginning of each item to operate.

Setting or clearing chapter marks:

You can set or clear chapter marks on titles.

Hiding chapters:

To keep others from playing back some chapters without
permission, you can hide chapters.

Deleting parts of titles:

You can delete a specific part of a title.

Dividing or combining titles:

You can divide or combine a title.

Editing title names:

You can change the title name you prefer.

Symbol

For Recording, Playing Back, and Editing

For Playback only

Description

Description refers to DVD-RW in video mode

Description refers to DVD-R in video mode

Description refers to audio CD

Description refers to CD-RW/-R with MP3 les

Description refers to DVD-RW in VR mode

Description refers to CD-RW/-R with WMA les

Description refers to CD-RW/-R with JPEG les

Description refers to DVD-RW/-R, DVD+RW/+R
and CD-RW/-R with DivX® les

Description refers to DVD-video

Description refers to DVD+RW

Description refers to DVD+R

If you do not nd any of the symbols listed above under the
function heading, the operation is applicable to all media.

Description refers to VHS tapes
Use only cassettes marked VHS ( ).

E9KGBUD_D-KVR20KU_EN.indd 8E9KGBUD_D-KVR20KU_EN.indd 8 2008/05/27 16:10:052008/05/27 16:10:05

9EN 9EN

Disc

Management

Recording Playback

Introduction

Connections Basic Setup Editing Function Setup VCR Function Others

FEATURES

Discs for Recording, Playing back

Disc type DVD-RW DVD-R DVD+RW DVD+R

Logo

Format

Can be formatted in VR or video
mode

Automatically
formatted in
video mode

Automatically
formatted in
+VR mode

Automatically
formatted in
+VR mode

Video Mode VR Mode

Icon

Maximum record

time

480 min (12cm)
144 min (8cm)

480 min (12cm)
144 min (8cm)

480 min (12cm)
144 min (8cm)

480 min (12cm)
144 min (8cm)

480 min (12cm)
144 min (8cm)

Recordable/playable

versions

Ver.1.1,1.2
Ver.1.1/2× CPRM compatible
Ver.1.2/4× CPRM compatible

Ver.2.0
Ver.2.0/4×
Ver.2.0/8×
Ver2.0/16×

1×-4× 1×-16×

Compatibility

Playable on
most DVD
players.
Finalization
necessary.
(title menu will
be created)

Playable only
on VR mode
compatible unit.
Finalization
recommended.

Playable on
most DVD
players.
Finalization
necessary.
(title menu will
be created)

Playable on
DVD+RW
compatible
players.
Finalization
recommended.
(title menu will
be created)

Playable on
most DVD
players.
Finalization
recommended.
(title menu will
be created)

Available Features

Recording Features

Record TV
programs

✓✓✓✓✓

Reuse by deleting
the current
contents

✓✓ ✓

Record 16:9 size
pictures

✓✓✓

Record copy-once
programs

✓*

Create chapters
at fixed intervals
(auto chapter)

✓✓✓✓✓

Editing Features

Playlist

Original

Scene delete

✓✓

Edit title name

✓✓✓✓✓✓

Create chapters
wherever you like
(chapter mark)

✓✓ ✓ ✓

Divide a title

✓✓

Combine titles

✓

Hide chapters

✓✓

Delete a title

✓✓✓✓✓✓

Create a
playlist

✓

Protect a title

✓

✓: Available Gray: Not available

*CPRM compatible disc only.

E9KGBUD_D-KVR20KU_EN.indd 9E9KGBUD_D-KVR20KU_EN.indd 9 2008/05/27 16:10:062008/05/27 16:10:06

10 EN10 EN

Discs for playing back

Disc Type DVD-VIDEO CD-DA CD-RW CD-R

Logo

Icon

Files for playing back

Recording/Playing back

Type of title MP3 WMA JPEG DivX® VCR

Icon

Media CD-RW/-R CD-RW/-R CD-RW/-R

CD-RW/-R

DVD-RW/-R

DVD+RW/+R

Cassette Tape

is a trademark of DVD Format/Logo Licensing Corporation.

• Official DivX® Certified product

• Plays all versions of DivX® video (including DivX® 6) with
standard playback of DivX® media files

• Discs containing the DivX® files with the DivX® GMC (Global

Motion Compensation) playback feature, which is DivX®
supplemental function, cannot be played back on this unit.

* This unit cannot play back the disc contents protected

by Windows Media Digital Rights Management (DRM).

DVD is recorded in different color systems throughout
the world. The most common color system is NTSC
(which is used primarily in the United States and Canada).
This unit uses NTSC, so DVD you play back must be
recorded in the NTSC system. You cannot play back DVD
recorded in other color systems.

Color Systems

This unit has been designed to play back DVD
with region 1. DVD must be labeled for ALL
regions or for region 1 in order to play back on
the unit. You cannot play back DVD that are
labeled for other regions. Look for the symbols
on the right on your DVD. If these region
symbols do not appear on your DVD, you cannot
play back the DVD in this unit.

Region Codes

The following discs will not play back on this unit.

• CD-ROM • Compact Disc-Interactive (CD-I)

• Video Single Disc (VSD) • DVD-ROM

• DVD-audio • Unfinalized disc

• DVD contains MP3, WMA or JPEG files

• DVD-RW/-R recorded in non compatible recording format

• Blu-ray Disc • HD DVD

On the following disc, the sound may not be heard.

• Super audio CD - Only the sound on the CD layer can be

heard. The sound on the high-density super audio CD
layer cannot be heard.

Unplayable Discs

The number inside the globe refers to region of the world.
A DVD labeled for a specific region can only play back on
the unit with the same region code.

• Toshiba is not liable for any damage or loss caused directly
or indirectly by the malfunction of this recorder, including,
without limitation, any one of the following:

• Failure to record contents intended to be recorded by
the consumer.

• Failure to edit contents as intended by the consumer.

• When a DVD-RW/-R, DVD+RW/+R disc created on this
recorder is used (e.g., insertion, playback, recording or
editing) in another DVD player, recorder or personal
computer drive.

• When a DVD-RW/-R, DVD+RW/+R disc that is used in
the manner described in the immediately preceding
bullet point is used again in this recorder.

• When a DVD-RW/-R, DVD+RW/+R disc that was
recorded in another DVD recorder, or in a personal
computer drive is used in this recorder.

• Some functions may not work with personal computer
discs.

• Discs recorded in this recorder may not operate as
expected on other DVD players, recorders or personal
computer drives.

Because of problems and errors that can occur during the
creation of DVD and CD software and/or the manufacture
of DVD and CD discs, Toshiba cannot assure that this DVD
Video Recorder will successfully play every disc bearing the
DVD and CD logos. If you happen to experience any
difficulty playing a DVD and/or CD disc on this DVD Video
Recorder, please contact Toshiba Customer Service.

DVD players with

are capable of playing DVD-RW

recorded in VR mode.

Following discs are recommended for good recording
quality and are proven to be compatible with this unit.
However, depending on the media condition, the unit
may not read the disc properly.
Verbatim DVD+R 8x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x
JVC DVD-RW 4x
Maxell DVD+R 4x/8x/16x, DVD-R 8x/16x
SONY DVD+R 4x/8x/16x, DVD+RW 4x
TDK DVD+R 4x/8x/16x
Performance of any other discs are not guaranteed.

FEATURES

E9KGBUD_D-KVR20KU_EN.indd 10E9KGBUD_D-KVR20KU_EN.indd 10 2008/05/27 16:10:072008/05/27 16:10:07

11EN 11EN

Disc

Management

Recording Playback

Introduction

Connections Basic Setup Editing Function Setup VCR Function Others

FUNCTIONAL OVERVIEW

Front Panel

19 16 15 142021 1718 13 12 9*10 8

1 2 43* 5 7116

Rear Panel

DVD

DIGITAL

AUDIO OUT

AUDIO

OUT

S-VIDEO

OUT IN

COAXIAL

L

R

L

Y

P

B

/CB

PR
/CR

RLR

S-VIDEO IN --- AU DI O --- OUT

IN --- VID E O --- OUT

COMPONENT

VIDEO OUT

DVD/VCR

HDMI OUT

1 2

37911 8 6 4510

Note

• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.

(*) The unit can also be

turned on by pressing
these buttons or by
inserting a cassette tape.

1. I/y ON/STANDBY button (DVD/VCR)

Press to turn on and off the unit.

2. Cassette compartment (VCR)

Insert a cassette tape here.

3. A OPEN/CLOSE button (DVD)*

Press to open or close the disc tray.

4. Disc tray (DVD)

Place a disc when it is open.

5. VIDEO input jack (L2) (DVD/VCR)

Use to connect external device with an RCA video cable.

6. AUDIO input jacks (L2) (DVD/VCR)

Use to connect external device with an RCA audio cable.

7. DV input jack (L3) (DVD/VCR)

Use to connect the DV output of external device with a DV cable.

8. I REC button (DVD)

Press once to start a recording.
Press repeatedly to start the one-touch timer recording.

9. B PLAY button (DVD)*

Press to start or resume playback.

10. C STOP button (DVD)

Press to stop playback or recording.
Press to stop the proceeding timer recording in DVD.

11. VCR/DVD indicator

Lights up when the VCR/DVD output mode is selected.

12. VCR/DVD button (DVD/VCR)

Press to select the component you wish to operate.

13. DUBBING button (DVD/VCR)

Press to start VCR to DVD (DVD to VCR) duplication which

you set in the main menu.

14. TRACKING

/ buttons (VCR)

Press to adjust the tracking during playback or in slow

motion of the cassette tape.

While playback is in still mode, you can stabilize the picture.

15. Display

Refer to “FRONT PANEL DISPLAY GUIDE” on page 18.

16. Infrared sensor window (DVD/VCR)

Receive signals from your remote control so that you can

control the unit from a distance.

17. I REC button (VCR)

Press once to start a recording. Press repeatedly to start the

one-touch timer recording.

18. B PLAY button (VCR)

Press to start playback.

19. A EJECT / C STOP button (VCR)
A EJECT button
When the unit is in stop mode, press to remove the cassette

tape from the cassette compartment.

C STOP button
Press to stop cassette tape playback or recording.
Press to stop the proceeding timer recording in VCR.

20. D FWD button (VCR)

Press to rapidly advance the cassette tape, or view the

picture rapidly in forward during playback (forward search).

21. E REW button (VCR)

Press to rewind the cassette tape, or to view the picture

rapidly in reverse during playback (rewind search).

1. AC Power Cord (DVD/VCR)

Connect to a standard AC outlet to supply power to this unit.

2. HDMI OUT jack (DVD only)

Use an HDMI cable to connect to a display with an HDMI

compatible port.

3. AUDIO OUT jacks (DVD/VCR)

Use to connect a TV monitor, AV receiver or other device

with an RCA audio cable.

4. VIDEO OUT jack (DVD/VCR)

Use to connect a TV monitor, AV receiver or other device

with an RCA video cable.

5. VIDEO IN jack (L1) (DVD/VCR)

Use to connect external device with an RCA video cable.

6. AUDIO IN jacks (L1) (DVD/VCR)

Use to connect external device with an RCA audio cable.

7. S-VIDEO IN jack (L1) (DVD/VCR)

Use to connect the S-video output of external device with an

S-video cable.

8. COMPONENT VIDEO OUT jacks (DVD only)

Use to connect a TV monitor with component video inputs

with a component video cable.

9. S-VIDEO OUT jack (DVD only)

Use to connect the S-video input of a TV monitor, AV receiver

or other device with an S-video cable.

10. AUDIO OUT jacks (DVD only)

Use to connect a TV monitor, AV receiver or other device

with an RCA audio cable.

11. COAXIAL DIGITAL AUDIO OUT jack (DVD only)

Use to connect an AV receiver, Dolby Digital decoder or

other device with a coaxial digital input jack with a digital
coaxial cable.

E9KGBUD_D-KVR20KU_EN.indd 11E9KGBUD_D-KVR20KU_EN.indd 11 2008/05/27 16:10:092008/05/27 16:10:09

12 EN12 EN

FUNCTIONAL OVERVIEW

Remote Control

Installing the Batteries in the Remote
Control

Keep in mind the following when using the remote
control:

• Make sure that there are no obstacles between the remote
control and the infrared sensor window on the unit.

• Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.

• Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.

• Replace the batteries when you notice a fall off in the
operating range of the remote control.

• The maximum operable ranges from the unit are as
follows.

- Line of sight: approx. 23 feet (7m)

- Either side of the center:

approx. 23 feet (7m) within 30°

Install the batteries (AAx2) matching the polarity
indicated inside battery compartment of the remote
control.

Caution:

Never throw batteries into a fire.

Note:

• Be sure to use AA size batteries.

• Dispose of batteries in a designated disposal area.

• Batteries should always be disposed of with the
environment in mind. Always dispose of batteries in
accordance with applicable laws and regulations.

• If the remote control does not operate correctly, or if
the operating range becomes reduced, replace
batteries with new ones.

• When necessary to replace batteries in the remote
control, always replace both batteries with new ones.
Never mix battery types or use new and used
batteries in combination.

• Always remove batteries from remote control if they
are dead or if the remote control is not to be used for
an extended period of time. This will prevent battery
acid from leaking into the battery compartment.

Using a Remote Control

1

Open the cover.

2

Insert batteries.

Make sure to match + and - on the batteries to
the marks indicated in the battery compartment.

3

Close the cover.

SE-R0295

OPEN/

CLOSE

INPUT

SELECT

HDMI

.@/: ABC

GHI

PQRS TUV

SPACE

SETUP DISPLAY AUDIO

TIMER

PROG.

DISC MENU

CLEAR RETURN

TOP MENU

WXYZ

SAT.LINK

JKL MNO

DEF

TRACKING

ENTER

INSTANT

SKIP

PLAY

DVDVCR

PAUS E

REV

SKIP

STOP

SKIP

FWD

1.3x/0.8x
PLAY

TIME SLIP

TIMER SET ZOOMSEARCHREPEAT

RECREC MODEDUBBING

18

2

3

20

19

21

23

25

26

27

33

34

32

22

30

28

29

31

36

35

24

4
5

7

11

12
13

9

6

8

10

14

15

1

16

17

23feet (7m)

30˚30˚

23feet (7m) 23feet (7m)

E9KGBUD_D-KVR20KU_EN.indd 12E9KGBUD_D-KVR20KU_EN.indd 12 2008/05/27 16:10:102008/05/27 16:10:10

13EN 13EN

Disc

Management

Recording Playback

Introduction

Connections Basic Setup Editing Function Setup VCR Function Others

FUNCTIONAL OVERVIEW

1. INPUT SELECT button

• Press to select the appropriate input.

2. OPEN/CLOSE A button

DVD mode:

• Press to open or close the disc tray.

VCR mode:

• Press to remove the cassette tape from the cassette
compartment.

3. Number/Character buttons

• Press to enter values for the settings in the main menu.

DVD mode:

• Press to select a title/chapter/track/file on display.

• Press to enter title names.

VCR mode:

• Press to start the index/time search.

4. SETUP button

• Press to display the main menu.

• During DVD playback, press and hold for more than
3 seconds to switch the progressive scanning mode
to the interlace mode.

5. DISC MENU button (DVD)

• Press to display the disc menu. To change original
and playlist on the TV screen.

6. Cursor K / L / { / B buttons

• Press to select items or settings.

7. CLEAR button

DVD mode:

• Press to clear the password once entered, to cancel
the programming for CD, to clear the selecting
marker number in the display menu, etc.

VCR mode:

• Press to reset the tape counter.

8. INSTANT SKIP button (DVD)

• During playback, press to skip 30 seconds.

9. REV E button

DVD mode:

• During playback, press to fast reverse playback.

• When playback is in pause, press to slow reverse playback.

VCR mode:

• During playback, press to view the picture rapidly in
reverse.

• Press to fast reverse the cassette tape in stop mode.

10. PLAY B button

• Press to start playback or resume playback.

11. SKIP H button (DVD)

• During playback, press to return to the beginning of
the current chapter, track or file.

• During playback, press twice in quick succession to
skip to the previous chapter or track.

• When playback is in pause, press repeatedly to
reverse the playback step by step.

12. PAUSE F button

• Press to pause playback or recording.

13. DUBBING button

• Press to start VCR to DVD (DVD to VCR) duplication
which you set in the main menu.

14. REPEAT button

DVD mode:

• Press to select the repeat mode.

VCR mode:

• Press to set or release the Auto Repeat Playback. In
the Auto Repeat Playback mode, tape is played to its
end, the tape will rewind to the beginning and start
playback itself.

15. TIMER SET button

• Press to set the unit in the timer standby mode. In
the timer standby mode, press to cancel the mode
and to turn the unit on.

16. HDMI button (DVD)

• Press to set the HDMI connector’s video signal
output mode.

17.

I/y

ON/STANDBY button

• Press to turn the unit on and off.

18. TRACKING / buttons (VCR)

• Press to adjust the tracking during playback or in
slow motion of the cassette tape.

• While playback is in still mode, you can stabilize the
picture.

19. SAT.LINK button

• Press to call up the Satellite Link setting.

20. TIMER PROG. button

• Press to display the timer programming list.

21. AUDIO

button

DVD mode:

• During playback, press to display the audio menu.

VCR mode:

• During the playing of a HiFi video tape, press to
change the audio out setting to HiFi or mono.

22. DISPLAY button

• Press to display the display menu on or off.

23. TOP MENU button (DVD)

• Press to display the title list.

24. ENTER button

• Press to confirm or select menu items.

25. RETURN button

• Press to return to the previous displayed menu screen.

26. TIME SLIP button (DVD)

• Press once to start recording the TV program you
are watching. Press again to watch the content
being recorded from the beginning while recording
continues. (VR mode DVD-RW with the recording
mode of LP, EP or SLP only)

27. 1.3x/0.8x PLAY button (DVD)

• During playback, press to play back in a slightly
faster/slower speed while keeping the sound output.

28. FWD D button

DVD mode:

• During playback, press to fast forward playback.

• When playback is in pause, press to slow forward playback.

VCR mode:

• During playback, press to view the picture rapidly in
forward.

• Press to fast forward the cassette tape in stop mode.

• When playback is paused, press to view the cassette
tape in slow motion.

29. SKIP G button (DVD)

• During playback, press to skip to the next chapter,
track or file.

• When playback is in pause, press repeatedly to
forward the playback step by step.

30. STOP C button

• Press to stop playback or recording.

DVD mode:

• Press to exit from the title list.

31. DVD button

• Press to select the DVD output mode.

32. VCR button

• Press to select the VCR output mode.

33. REC I button

• Press once to start a recording.

• Press repeatedly to start the one-touch timer recording.

34. REC MODE button

• Press to switch the recording mode.

35. ZOOM button (DVD)

• During playback, press to enlarge the picture on the
TV screen.

36. SEARCH button (VCR)

• Press to call up the index or time search menu.

Note

• If you turn off this unit, [OPEN/CLOSE A] on the remote

control is not available.
Be sure to use [OPEN/CLOSE A] or [ A EJECT / C STOP]
on the unit.

E9KGBUD_D-KVR20KU_EN.indd 13E9KGBUD_D-KVR20KU_EN.indd 13 2008/05/27 16:10:112008/05/27 16:10:11

14 EN14 EN

Because this product is a combination of a VCR and a DVD recorder, you must select first which component you wish
to operate with [VCR/DVD].

DVD mode

Press [DVD] on the remote control.
(Verify that the DVD indicator is lit.)

VCR mode

Press [VCR] on the remote control.
(Verify that the VCR indicator is lit.)

Note

• You cannot switch to another mode (DVD or VCR) in the timer-standby mode.

THE VCR / DVD RECORDER SWITCHING

VCR button

DVD button

DVD indicator
VCR indicator

SE-R0295

OPEN/
CLOSE

INPUT

SELECT

HDMI

.@/: ABC

GHI

PQRS TUV

SPACE

SETUP DISPLAY AUDIO

TIMER
PROG.

DISC MENU

CLEAR RETURN

TOP MENU

WXYZ

SAT.LINK

JKL MNO

DEF

TRACKING

ENTER

INSTANT

SKIP

PLAY

DVDVCR

PAUSE

REV

SKIP

STOP

SKIP

FWD

1.3x/0.8x
PLAY

TIME SLIP

TIMER SET ZOOMSEARCHREPEAT

RECREC MODEDUBBING

E9KGBUD_D-KVR20KU_EN.indd 14E9KGBUD_D-KVR20KU_EN.indd 14 2008/05/27 16:10:122008/05/27 16:10:12

15EN 15EN

Disc

Management

Recording Playback

Introduction

Connections Basic Setup Editing Function Setup VCR Function Others

This unit uses the following on-screen displays and menus to guide you to the easy operations.
The on-screen displays give you the information on the loaded disc, the disc/file in playback, or the HDMI status, etc.
The menus allow you to change the various kinds of settings for playing back, recording, or editing to suit your preference.

On-Screen Display / Menu

GUIDE TO ON-SCREEN DISPLAYS AND MENUS

Disc Information / Menu

The on-screen display changes in the following order
as you press [DISPLAY].

OFF

Disc Information/Menu

Title Name Information

(only when DVD+RW/+R, VR mode DVD-RW/-R, or

unfinalized Video mode DVD-RW/-R is in playback)

or

File Name Information

(only when a CD with MP3/WMA/

JPEG/DivX® files is in playback)

MP3/WMA Tag Information

(only when a MP3 or WMA file is in playback)

HDMI Information

(only for the images output through the HDMI output)

L1

1/ 5 1/ 5

-

RW VR ORG

0:01:00 / 1:23:45

SP 1:53

25

613

7

44

* This is an example screen only for explanation.

1. Indicates a disc type and format mode.

2. Indicates a type of titles for VR mode DVD-RW .

3. Indicates a selected external input mode.

4. Indicates a recording mode and possible recording

time left.

5. Indicates a title number, chapter number, elapsed time

and total time of disc playback.

6. Each icon means:

: Search

: Audio

: Subtitle

: Angle

: Repeat

: Marker

: Noise Reduction / Black Level

: Zoom

: Surround

7. Indicates an operation status.

0:00:00 HIFISP

12:00AM

4 53

2

1

* This is an example screen only for explanation.

1. Indicates current video status.

2. Indicates the current time.

3. Indicates a recording or playing back mode.

4. Indicates a tape counter.

5. Audio status of the current cassette tape.

VCR mode

DVD mode

Note

• In some descriptions on this manual, only one disc
type is indicated as an example.

E9KGBUD_D-KVR20KU_EN.indd 15E9KGBUD_D-KVR20KU_EN.indd 15 2008/05/27 16:10:122008/05/27 16:10:12

16 EN16 EN

Video Info. : 480p / YCbCr
Audio Info. : Bitstream

21

343

*1. Indicates the resolution of the HDMI output image.
*2. Indicates the HDMI video format.
*3. Indicates the HDMI audio format.

4. Indicates current disc status.
* “- - -” will be displayed, when it does not have any

information.

HDMI Information

GUIDE TO ON-SCREEN DISPLAYS AND MENUS

Title name information

Title Name

My Title

File name information

File Name

My File

Title/File Name Information

• First, track name will be displayed.

Track Name

• If you press [DISPLAY] one more time, artist name will

be displayed.

Artist Name

• If you press [DISPLAY] one more time, album name

will be displayed.

Album Name

• If there is no artist, track or album name, “Not Available”
will be displayed.

MP3/WMA Tag Information

E9KGBUD_D-KVR20KU_EN.indd 16E9KGBUD_D-KVR20KU_EN.indd 16 2008/05/27 16:10:132008/05/27 16:10:13

17EN 17EN

Disc

Management

Recording Playback

Introduction

Connections Basic Setup Editing Function Setup VCR Function Others

1. Format (DVD-RW, DVD+RW only):

Allows you to format the disc.

2. Finalize:

Allows you to finalize a disc containing recorded titles.

3. Disc Protect (VR mode DVD-RW, DVD+RW/+R only):
Allows you to protect a disc from accidental editing or

recording.

4. Delete All Playlists (VR mode DVD-RW only):
Allows you to delete playlist.

5. Random Play:

Allows you to activate the random playback feature.

6. Program Play: (Audio CD only)
Allows you to activate the program playback feature.

7. Slide Show: (JPEG files only)
Allows you to select the display time of the slide show

mode.

DVD Menu

Format
Finalize
Disc Protect OFF ON
Delete All Playlists

1
2
3
4

1
2
3
4

<DVD Menu menu>

CD Playback Mode

Random Play
Program Play
Slide Show

1
2
3

5
6
7

<CD Playback Mode menu>

GUIDE TO ON-SCREEN DISPLAYS AND MENUS

Main Menu

Press [SETUP] to display the main menu. Then use
[K / L] to select a menu and press [ENTER] to display the

menu. These menus provide entries to all main functions
of the unit.

1. General Setting:

To go to general setting menu.

2. Timer Programming:

To program a timer recording.

3. Title List:

To call up the title list.

4. DVD Menu:

To set up the DVD setting.

5. CD Playback Mode:

To set up the CD playback setting.

• “CD Playback Mode” is available only when an audio
CD, a CD-RW/-R with MP3 / WMA / JPEG / DivX® files is
inserted into the unit.

Setup

Timer Programming

Title List

DVD Menu

CD Playback Mode

General Setting

1
2
3
4
5

1
2
3
4
5

DVD Menu / CD Playback Mode

General Setting Menu

General Setting

Playback
Display
Video
Recording
Clock
DivX
HDMI
Reset All

1
2
3
4
5
2
3
4

1
2
3
4
5
6
7
8

1. Playback:

To set up the unit to play back discs as you prefer.

2. Display:

To set up the OSD screen as you prefer.

3. Video:

To set up the video setting.

4. Recording:

To set up the unit to record to discs as you prefer.

5. Clock:

To set up the clock of the unit as you need.

6. DivX:

To set up the setting for the DivX® playback.

7. HDMI:

To set up the HDMI connection setting.

8. Reset All:

To reset the setting to the factory default.

E9KGBUD_D-KVR20KU_EN.indd 17E9KGBUD_D-KVR20KU_EN.indd 17 2008/05/27 16:10:132008/05/27 16:10:13

18 EN18 EN

FRONT PANEL DISPLAY GUIDE

Appears when data is being
recorded on a disc.

Appears when a disc is loaded
on the disc tray.

DVD

Appears when the disc tray is
opening.

DVD

Appears when HDMI output
mode (720p) is selected.

Appears when HDMI output
mode (1080p) is selected.

Appears when HDMI output
mode (480p) is selected.

Appears when HDMI output
mode (1080i) is selected.

Appears when the disc tray is
closing.

DVD

DVD

Display Message

PM

BS CS DR CD

VCR

HDDDB

DVD

1

4

2

3

1.

PM

: Appears in the afternoon with

the clock display.

2. Title / track and chapter mark

: Appears when indicating a

title / track number.

: Appears when indicating a

chapter number.

3. Current status of the unit

: Appears when playback is

paused.

: Appears when playing back a

disc.

: Appears when the timer

programming or OTR has
been set and is proceeding.

: Flashes when all timer

recordings have been
finished.

: Appears during recording

process.

: Flashes when a recording

pauses.

: Appears when this unit is in

DVD output mode and a disc
is in the unit.

: Appears during duplication

process.

: Appears when this unit is in

VCR output mode and a
cassette tape is in the unit.

: Appears during duplication

process.

VCR

: Appears when this unit is in

VCR output mode.

: Appears when the timer

recording is proceeding in VCR.

: Appears when VCR is in the

timer recording standby mode.

: Flashes when a program

cannot be performed for
some reasons.

DVD

: Appears when this unit is in

DVD output mode.

: Appears when the timer

recording is proceeding in
DVD.

: Appears when DVD is in the

timer recording standby
mode.

: Flashes when a program

cannot be performed for
some reasons.

DB

: Appears during VCR to DVD

duplication process.

: Appears during DVD to VCR

duplication process.

4. Displays the following

• Elapsed playback time

• Current title / chapter / track /file
number

• Recording time / remaining time

• Clock

• Selected external input position

• Remaining time for one-touch
timer recording

• Selected HDMI output mode

E9KGBUD_D-KVR20KU_EN.indd 18E9KGBUD_D-KVR20KU_EN.indd 18 2008/05/27 16:10:142008/05/27 16:10:14

19EN 19EN

Disc

Management

Recording PlaybackIntroduction

Connections

Basic Setup Editing Function Setup VCR Function Others

OUT IN

DVD

DIGITAL

AUDIO OUT

AUDIO

OUT

S-VIDEO

IN

L

Y

P

B

/CB

PR
/CR

RLR

S-VIDEO IN --- AUD IO --- OUT

IN --- VIDE O --- OUT

COMPONENT
VIDEO OUT

DVD/VCR

HDMI OUT

ANT. IN

AUDIO IN

LR

VIDEO IN

AUDIO O UT

LR

VIDEO

OUT

S-VIDEO

OUT

IN

L

RLR

S-VIDEO I N --- AUDIO --- OUT

IN --- VIDEO --- OUT

DVD/VCR

rear of your TV

external tuner

rear of this unit

RF coaxial cable

e.g.)

TV signal

RCA audio
cable

RCA audio cable

RCA video cable

RCA video cable

S-video cable

RF coaxial cable

or

rear of your TV

disconnect

HDMI OUT

rear of your TV

rear of this unit

connect

CONNECTION TO AN EXTERNAL TUNER

Note

• Required cables and connecting methods differ depending on the external tuner.
For more information, please contact your external tuner provider.

• Instead of using VIDEO OUT jack of this unit, you can also use S-VIDEO OUT jack, COMPONENT VIDEO OUTPUT
jack, or HDMI OUT jack (no AUDIO OUT jack connection required) (DVD only) for connecting to your TV.

With this setup:

• You can record any unscrambled channel by selecting the channel on the external tuner. Be sure that the external
tuner is turned on.

• Signal from the external tuner can be output only on CVBS output even when the power of the unit is off.

• You cannot record one channel while watching another channel.

2

Make the connection as illustrated below.

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

• RCA video cable x 1
Please purchase the rest of the necessary cables at your local store.

Note to CATV system installer

• This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electrical
Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be
connected to the grounding system of the building, as close to the point of cable entry as possible.

1

Disconnect the power cords of the devices from the AC outlet.

This section describes how to connect this unit to an external tuner such as cable/satellite box.

• When you change the connections, all devices should be turned off.

• Refer to the operation manual accompanying external devices for more information.

4

After making the connection as described above, make

sure to select the appropriate video input type by
following the steps in “SETTINGS FOR THE VIDEO INPUT”
on page 20.

3

Plug in the power cords of the devices to the AC outlet.

E9KGBUD_D-KVR20KU_EN.indd 19E9KGBUD_D-KVR20KU_EN.indd 19 2008/05/27 16:10:162008/05/27 16:10:16

20 EN20 EN

SETTINGS FOR THE VIDEO INPUT

You must let the unit know which video input jack you are using before making a recording.

1

Press [SETUP].

2

Use [K / L] to select “General

Setting”, then press [ENTER].

3

Use [K / L] to select “Video”, then

press [ENTER].

4

Use [K / L] to select “Select Video”,

then press [ENTER].

5

Use [K / L] to select the input jack

type to connect, then press [ENTER].

If you want to use VIDEO IN jack, select “Video
In”.

If you want to use S-VIDEO IN jack, select
“S-Video In”.

General Setting

Playback
Display
Video
Recording
Clock
DivX
HDMI
Reset All

Progressive
TV Aspect
Select Video

Select Video - L1 (Rear)

Video In
S-Video In

6

Press [SETUP] to exit.

SE-R0295

OPEN/
CLOSE

INPUT

SELECT

HDMI

.@/: ABC

GHI

PQRS TUV

SPACE

SETUP DISPLAY AUDIO

TIMER
PROG.

DISC MENU

CLEAR RETURN

TOP MENU

WXYZ

SAT.LINK

JKL MNO

DEF

TRACKING

ENTER

INSTANT

SKIP

PLAY

DVDVCR

PAUS E

REV

SKIP

STOP

SKIP

FWD

1.3x/0.8x
PLAY

TIME SLIP

TIMER SET ZOOMSEARCHREPEAT

RECREC MODEDUBBING

ENTER

SETUP

E9KGBUD_D-KVR20KU_EN.indd 20E9KGBUD_D-KVR20KU_EN.indd 20 2008/05/27 16:10:172008/05/27 16:10:17

21EN 21EN

Disc

Management

Recording PlaybackIntroduction

Connections

Basic Setup Editing Function Setup VCR Function Others

Note

• If S-video cable is connected to the S-VIDEO OUT
jack, the picture from the VCR will not be displayed.

• Connect this unit directly to the TV. If the RCA audio/
video cables are connected to a VCR, pictures may be
distorted due to the copy protection system.

• You will not be able to hear the sound being output
from DVD if you are not connecting DVD AUDIO OUT
when you made either S-video or component video
out connection.

• Progressive signal will not be output from the
VIDEO OUT or S-VIDEO OUT jack.

After you have completed the connections

• Switch the input selector on your TV to an appropriate
external input channel. Press a button on the TV’s
original remote control that selects an external input
channel until the DVD recorder’s opening picture
appears. Check your TV owner’s manual for details.

To set progressive scan mode, refer to page 94

• This unit is compatible with the progressive scan system. The

feature provides you the higher quality images than the
traditional output system. To utilize this feature, you must
set “Progressive” to “ON”.

CONNECTION TO A TV

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1

• RCA video cable x 1
Please purchase the rest of the necessary cables at your
local store.

S-VIDEO IN

DVD

DIGITAL

AUDIO OUT

AUDIO

OUT

S-VIDEO

OUT

COAXIAL

L

R

Y

P

B

/CB

PR

/CR

COMPONENT

VIDEO OUT

DVD

DIGITAL

AUDIO OUT

AUDIO

OUT

S-VIDEO

OUT

COAXIAL

L

R

Y

P

B

/CB

PR
/CR

COMPONENT

VIDEO OUT

Y

PB/CB

PR/CR

COMPONENT

VIDEO IN

(Green)

(Blue)

(Red)

(Green)

(Blue)

(Red)

DVD

DIGITAL
AUDIO OUT

AUDIO

OUT

S-VIDEO

OUT IN

COAXIAL

L

R

L

Y

P

B

/CB

PR

/CR

RLR

S-VIDEO IN --- AUDIO --- OUT

IN --- VIDE O --- OU T

COMPONENT
VIDEO OUT

DVD/VCR

HDMI OUT

AUDIO IN

LR

VIDEO

IN

IN

LRL

R

S-VIDEO IN --- AUDI O --- OU T

IN --- V ID E O --- OU T

DVD/VCR

AUDIO OUT (DVD)

TV

analog audio good picture better picture

S-VIDEO OUT COMPONENT

VIDEO OUTPUT

this unit

or

RCA audio
cable

S-video cable component video cable

RCA video
cable

Method 1 Method 2

TV

this unit

and

DVD

DIGITAL

AUDIO OUT

AUDIO
OUT

S-VIDEO

OUT

COAXIAL

L

R

Y

P
/C

P
/C

VIDEO OUT

AUDIO IN

LR

DVD

DIGITAL

AUDIO O UT

AUDIO

OUT

S-VIDEO

OUT

COAXIAL

L

R

Y

P

B

/CB

PR
/CR

COMPONENT

VIDEO OUT

AUDIO OUT (DVD/VCR)

VIDEO OUT

RCA audio cable

Available for DVD only

VCR and basic DVD connection

Make one of the following connections, depending on the capabilities of your existing device.

E9KGBUD_D-KVR20KU_EN.indd 21E9KGBUD_D-KVR20KU_EN.indd 21 2008/05/27 16:10:182008/05/27 16:10:18

22 EN22 EN

CONNECTION TO A TV WITH AN HDMI™ COMPATIBLE PORT

A simple 1-cable connection with a device having an HDMI (high-definition multimedia interface) connector allows
digital transfer of both digital video signals and multi-channel audio signals.

HDMI OUT

HDMI IN

HDMI cable

TV

this unit

HDMI Mode and Actual Output Signals

Press [HDMI] to select the HDMI output mode. The output mode changes as follows every time [HDMI] is pressed.

Front Panel Display Video Output Signal

480 Progressive

Press [HDMI]

720 Progressive

Press [HDMI]

1080 interlaced

Press [HDMI]

1080 Progressive

Press [HDMI]

• The HDMI mode that is not supported by display device will be skipped.

Supplied cables used in this connection are as follows:

• HDMI cable x 1

When connecting with an HDMI cable, the audio signal will be output as the digital audio signal simultaneously, so
you do not need the analog audio connection described on page 21.

Available for DVD only

E9KGBUD_D-KVR20KU_EN.indd 22E9KGBUD_D-KVR20KU_EN.indd 22 2008/05/27 16:10:192008/05/27 16:10:19

23EN 23EN

Disc

Management

Recording PlaybackIntroduction

Connections

Basic Setup Editing Function Setup VCR Function Others

*HDMI: High Definition Multimedia Interface

Copyright protection system

To play back the digital video images of a DVD via an HDMI connection, it is necessary that both the player and the
display device (or an AV amplifier) support a copyright protection system called HDCP (high-bandwidth digital
content protection system). HDCP is copy protection technology that comprises data encryption and authentication
of the connected AV device. This unit supports HDCP. Please read the operating instructions of your display device
(or AV amplifier) for more information.

Note

• Because HDMI is an evolving technology, it is possible that some devices with an HDMI input may not operate
properly with this unit.

• When using an HDCP-incompatible display device, the image will not be viewed properly.

• Among the devices that support HDMI, some devices can control other devices via the HDMI connector; however,
this unit cannot be controlled by another device via the HDMI connector.

• The audio signals from the HDMI connector (including the sampling frequency, the number of channels and bit
length) maybe limited by the device that is connected.

• Among the monitors that support HDMI, some do not support audio output (for example, projectors). In
connections with device such as this unit, audio signals are not output from the HDMI output connector.

• When this unit’s HDMI connector is connected to a DVI-D compatible monitor (HDCP compatible) with an HDMI­DVI converter cable, the signals are output in digital RGB.

• If the connected equipment is not compatible with HDMI BITSTREAM, DTS sound will not be output.

• When the power failure occurs, or when you unplug the unit, some problems in the HDMI setting might occur.
Please check and set the HDMI setting again.

CONNECTION TO A TV WITH AN HDMI™ COMPATIBLE PORT

Audio recording format of the disc Dolby Digital setting of this unit Actual output

DVD-video

Dolby Digital

PCM 2channel PCM

Stream Dolby Digital

LPCM

PCM

2channel PCM

Stream

DivX®

Dolby Digital

PCM 2channel PCM

Stream Dolby Digital

MP3 / MP2

PCM

2channel PCM

Stream

For audio CD and MP3 / WMA files, 2 channel PCM will be output regardless of the “Dolby Digital” setting.
If the connected device is not compatible with HDMI BITSTREAM, audio will be output as PCM even if you select

“Stream” in “Dolby Digital” setting (Refer to page 89).

Actual Output Modes by Media

E9KGBUD_D-KVR20KU_EN.indd 23E9KGBUD_D-KVR20KU_EN.indd 23 2008/05/27 16:10:192008/05/27 16:10:19

24 EN24 EN

CONNECTION TO AN AUDIO SYSTEM

• When you change the connections, all devices should be turned off.

• Refer to the owner’s manual accompanying external devices for more information.

Note

• The DVD AUDIO OUT and DIGITAL AUDIO OUT jacks are only useful in DVD mode.

• The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound
by an MD or DAT deck.

• By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel
surround sound as heard in the movie theaters.

• By connecting this unit to the DTS decoder, you can enjoy Multi-channel Surround System which reproduces the
original sound as truthfully as possible. Multi-channel Surround System is developed by the DTS, Inc.

• Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers.

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.

DVD

DIGITAL

AUDIO OUT

AUDIO
OUT

S-VIDEO

OUT IN

COAXIAL

L

R

L

Y

P

B

/CB

PR
/CR

RLR

S-VIDEO IN --- AUDIO --- OUT

IN --- VIDEO --- OUT

COMPONENT
VIDEO OUT

DVD/VCR

HDMI OUT

AUDIO IN

LR

IN

L

R

S-VI DEO IN --- AU D IO --- OU T

IN --- VI DE O --- OUT

DVD/VCR

DVD

DIGITAL

AUDIO OUT

AUDIO

OUT

S-VIDEO

OUT

COAXIAL

L

R

Y

P

B

/CB

PR

/CR

COMPONENT

VIDEO OUT

DVD

DIGITAL
AUDIO OUT

AUDIO

OUT

S-VIDEO

OUT IN

COAXIAL

L

R

L

Y

P

B

/CB

PR
/CR

RLR

S-VIDEO IN --- AUDIO --- OUT

IN --- VIDEO --- OUT

COMPONENT
VIDEO OUT

DVD/VCR

HDMI OUT

DIGITAL

AUDIO OUT

AUDIO

OUT

S-VIDEO

OUT

COAXIAL

L

R

Y

P

B

/CB

PR

/CR

COMPONENT

VIDEO OUT

COAXIAL

DVD

*MD deck or DAT deck can be also connected through coaxial jack.

stereo system

audio

analog audio

input jacks

RCA audio cable

AUDIO OUT

2 Channel Analog Audio Connection

Digital Audio Connection

Dolby Digital decoder

digital audio
coaxial input
jack

digital audio
coaxial cable

DIGITAL AUDIO OUT

this unit

or

Multi Channel Digital Audio Setting

Setting Setup >General Setting >Playback >Audio Out >

Connection Dolby Digital DTS

If output is Dolby Digital encoded audio, connect to
a Dolby Digital decoder.

Stream OFF

If output is DTS encoded audio, connect to a DTS
decoder.

PCM ON

If output is encoded audio for both Dolby Digital and
DTS, connect to the decoder which encodes multiple
audio sources.

Stream ON

Connecting to an MD deck or DAT deck. PCM OFF

If not connected to any external devices. PCM OFF

* To complete these settings, refer to page 89.

E9KGBUD_D-KVR20KU_EN.indd 24E9KGBUD_D-KVR20KU_EN.indd 24 2008/05/27 16:10:192008/05/27 16:10:19

25EN 25EN

Disc

Management

Recording PlaybackIntroduction Connections

Basic Setup

Editing Function Setup VCR Function Others

INITIAL SETTING

Turn on this unit for the first time, you need to follow these steps.

1

Press [I/yy ON/STANDBY].

Before:
Turn the TV on. Select the input to
which the unit is connected.

2

Use [K / L] to select your desired

language, then press [ENTER] to set
language.

Initial Setting

OSD Language

English
Français
Español

3

Press [ENTER] to activate “Clock

Setting”.

Initial Setting

Clock Setting

- - - / - - / - - - - ( - - - )

- - : - - - -

4

Proceed to step 3 in “Clock Setting”

on page 26.

SE-R0295

OPEN/

CLOSE

INPUT

SELECT

HDMI

.@/: ABC

GHI

PQRS TUV

SPACE

SETUP DISPLAY AUDIO

TIMER
PROG.

DISC MENU

CLEAR RETURN

TOP MENU

WXYZ

SAT.LINK

JKL MNO

DEF

TRACKING

ENTER

INSTANT

SKIP

PLAY

DVDVCR

PAUS E

REV

SKIP

STOP

SKIP

FWD

1.3x/0.8x
PLAY

TIME SLIP

TIMER SET ZOOMSEARCHREPEAT

RECREC MODEDUBBING

ENTER

E9KGBUD_D-KVR20KU_EN.indd 25E9KGBUD_D-KVR20KU_EN.indd 25 2008/05/27 16:10:202008/05/27 16:10:20

26 EN26 EN

SETTING THE CLOCK

Set the clock before you try the timer programming.

1

Press [SETUP] and use [K / L] to

select “General Setting”, then press
[ENTER].

2

Use [K / L] to select “Clock”, then

press [ENTER].

“Clock” menu will appear.

3

Use [K / L] to select calendar or time,

then press [ENTER].

General Setting

Playback
Display
Video
Recording
Clock
DivX
HDMI
Reset All

Clock Setting

JAN / 01 / 2008 ( TUE )

12 : 00 AM

4

Use [{ / B] to select an item to set,

and use [K / L] to select the contents
to suit your preference, then press
[ENTER].

General Setting

Playback
Display
Video
Recording
Clock
DivX
HDMI
Reset All

Clock Setting

JAN / 01 / 2008 ( TUE )

12 : 00 AM

Your setting will be activated.
The clock start counting when you press

[ENTER].

5

Press [SETUP] to exit.

Note

• Your clock setting will be lost if either there is a power
failure or this unit has been unplugged for more than
30 seconds.

• For setting the day, year, hour and minute,
[the Number buttons] can also be used.

• You can set the built-in calendar from the year 2007
up to 2057.

Clock Setting

SE-R0295

OPEN/
CLOSE

INPUT

SELECT

HDMI

.@/: ABC

GHI

PQRS TUV

SPACE

SETUP DISPLAY AUDIO

TIMER
PROG.

DISC MENU

CLEAR RETURN

TOP MENU

WXYZ

SAT.LINK

JKL MNO

DEF

TRACKING

ENTER

INSTANT

SKIP

PLAY

DVDVCR

PAUS E

REV

SKIP

STOP

SKIP

FWD

1.3x/0.8x
PLAY

TIME SLIP

TIMER SET ZOOMSEARCHREPEAT

RECREC MODEDUBBING

ENTER

GHI

PQRS TUV

SPACE

WXYZ

JKL MNO

.@/: ABC DEF

SETUP

E9KGBUD_D-KVR20KU_EN.indd 26E9KGBUD_D-KVR20KU_EN.indd 26 2008/05/27 16:10:212008/05/27 16:10:21

27EN 27EN

Disc

Management

Recording PlaybackIntroduction Connections Basic Setup Editing Function Setup VCR Function Others

FORMATTING A DISC

Choosing the Recording Format of a Brand-New DVD-RW

When inserting a brand-new DVD-RW or DVD+RW, the unit automatically starts to initialize the disc. DVD+RW will
always be formatted in +VR mode, and DVD-RW will be formatted either video or VR mode according to the recording
format mode setting of the unit. Before insert a brand-new DVD-RW, you need to set the recording format to the
desired mode. You can also manually format a DVD-RW once it has been used.

1

Press [SETUP].

2

Use [K / L] to select “DVD Menu”,

then press [ENTER].

Setup

Timer Programming

Title List

DVD Menu

General Setting

3

Use [K / L] to select “Format”, then

press [ENTER].

DVD Menu

Format

Finalize

4

Use [K / L] to select “Format Mode”,

then press [ENTER].

DVD Menu

Format
Finalize

Start

Format Mode

5

Use [K / L] to select “Video mode” or

“VR mode”, then press [ENTER].

6

Press [SETUP] to exit.

7

Insert a brand-new disc.

Formatting will start.

Formatting 90%

8

Formatting is completed.

“100%” is indicated.

Note

• The recording format setting is effective only for
DVD-RW. You cannot change the recording format
for a DVD-R and DVD+RW/+R.

• You cannot mix two formats on one DVD-RW disc. If
you insert a disc that has been formatted before, the
recording format is not changed if you select another
format in the “Setup” menu only. To reformat
(change disc format type) a disc, refer to
“Reformatting a Disc Manually” on page 28

SE-R0295

OPEN/

CLOSE

INPUT

SELECT

HDMI

.@/: ABC

GHI

PQRS TUV

SPACE

SETUP DISPLAY AUDIO

TIMER
PROG.

DISC MENU

CLEAR RETURN

TOP MENU

WXYZ

SAT.LINK

JKL MNO

DEF

TRACKING

ENTER

INSTANT

SKIP

PLAY

DVDVCR

PAUS E

REV

SKIP

STOP

SKIP

FWD

1.3x/0.8x
PLAY

TIME SLIP

TIMER SET ZOOMSEARCHREPEAT

RECREC MODEDUBBING

ENTER

SETUP

E9KGBUD_D-KVR20KU_EN.indd 27E9KGBUD_D-KVR20KU_EN.indd 27 2008/06/09 13:06:552008/06/09 13:06:55

28 EN28 EN

FORMATTING A DISC

Reformatting a Disc Manually

If you are using a DVD-RW or DVD+RW, you can format the disc by performing “Format”. You can format DVD-RW for
either video mode recording or VR mode recording. DVD+RW can be format in order to erase all content of the disc.

Insert a recordable disc.

1

Press [SETUP].

2

Use [K / L] to select “DVD Menu”,

then press [ENTER].

Setup

Timer Programming

Title List

DVD Menu

General Setting

3

Use [K / L] to select “Format”, then

press [ENTER].

e.g.) VR mode DVD-RW

DVD Menu

Format
Finalize
Disc Protect OFF ON
Delete All Playlists

4

Use [K / L] to select “Start”, then

press [ENTER].

DVD Menu

Format
Finalize
Disc Protect OFF ON
Delete All Playlists

Start
Format Mode

Selection menu will appear and prompt you to
confirm.

• For DVD+RW, use [K / L] to select “Yes”, then
press [ENTER].

5

Use [K / L] to select “Yes”, then press

[ENTER].

Formatting will start.
If you want to cancel formatting, select “No”.

DVD Menu

Format
Finalize
Disc Protect OFF ON
Delete All Playlists

Start
Format Mode

Are you sure?

Yes

No

6

Formatting is completed.

“100%” is indicated.

Formatting 100%

Note

• When you reformat the disc, the contents of the disc
are erased.

• For DVD-RW, make sure that the recording format is
set to the desired mode. (See steps 1 to 6 in
“Choosing the Recording Format of a Brand-New
DVD-RW” on page 27.)

• This unit may not be able to reformat a disc that is
not previously formatted by this unit e.g. DVD disc
formatted by PC or another recorder.

SE-R0295

OPEN/
CLOSE

INPUT

SELECT

HDMI

.@/: ABC

GHI

PQRS TUV

SPACE

SETUP DISPLAY AUDIO

TIMER
PROG.

DISC MENU

CLEAR RETURN

TOP MENU

WXYZ

SAT.LINK

JKL MNO

DEF

TRACKING

ENTER

INSTANT

SKIP

PLAY

DVDVCR

PAUS E

REV

SKIP

STOP

SKIP

FWD

1.3x/0.8x
PLAY

TIME SLIP

TIMER SET ZOOMSEARCHREPEAT

RECREC MODEDUBBING

ENTER

SETUP

E9KGBUD_D-KVR20KU_EN.indd 28E9KGBUD_D-KVR20KU_EN.indd 28 2008/06/09 13:06:562008/06/09 13:06:56

29EN 29EN

Disc

Management

Recording PlaybackIntroduction Connections Basic Setup Editing Function Setup VCR Function Others

SETTING A DISC TO PROTECT

1

Press [SETUP].

2

Use [K / L] to select “DVD Menu”,

then press [ENTER].

3

Use [K / L] to select “Disc Protect

OFF

ON”, then press [ENTER].

e.g.) VR mode DVD-RW

DVD Menu

Format
Finalize
Disc Protect OFF ON
Delete All Playlists

4

Use [K / L] to select “Yes”, then press

[ENTER].

DVD Menu

Format
Finalize
Disc Protect OFF ON
Delete All Playlist

Protect this disc?

Yes

No

A disc will be protected.

This operation may take

awhile to be completed.

To prevent accidental recording, editing or erasing the
titles, you can protect them from “DVD Menu” menu.

Note

To cancel the disc protect:

• When you insert a disc protected with this unit,
“Disc Protect ON

OFF” will appear instead of “OFF

ON”.

DVD Menu

Format
Finalize

Disc Protect ON OFF

Delete All Playlists

To release the protection for the disc, select “Disc

Protect ON

OFF” at step 3, then follow rest of the

procedures.

SE-R0295

OPEN/

CLOSE

INPUT

SELECT

HDMI

.@/: ABC

GHI

PQRS TUV

SPACE

SETUP DISPLAY AUDIO

TIMER
PROG.

DISC MENU

CLEAR RETURN

TOP MENU

WXYZ

SAT.LINK

JKL MNO

DEF

TRACKING

ENTER

INSTANT

SKIP

PLAY

DVDVCR

PAUS E

REV

SKIP

STOP

SKIP

FWD

1.3x/0.8x
PLAY

TIME SLIP

TIMER SET ZOOMSEARCHREPEAT

RECREC MODEDUBBING

ENTER

SETUP

E9KGBUD_D-KVR20KU_EN.indd 29E9KGBUD_D-KVR20KU_EN.indd 29 2008/05/27 16:10:252008/05/27 16:10:25

30 EN30 EN

PLAYING THE DISCS IN OTHER DVD PLAYERS

1

Press [SETUP] and use [K / L] to

select “General Setting”, then press
[ENTER].

“General Setting” menu will appear.

2

Use [K / L] to select “Recording”,

then press [ENTER].

“Recording” menu will appear.

3

Use [K / L] to select “Auto Finalize”,

then press [ENTER].

4

Use [K / L] to select “Disc Full” or

“End of Timer Rec”, then press
[ENTER].

General Setting

Playback
Display
Video
Recording
Clock
DivX
HDMI
Reset All

Auto Chapter
Recording Audio Select (XP)
Auto Finalize
Aspect Ratio (Video mode)
Dubbing Mode
Make Recording Compatible

Auto Finalize

Disc Full
End of Timer Rec

5

Use [K / L] to select “ON”, then press

[ENTER].

General Setting

Playback
Display
Video
Recording
Clock
DivX
HDMI
Reset All

Auto Chapter
Recording Audio Select (XP)
Auto Finalize
Aspect Ratio (Video mode)
Dubbing Mode
Make Recording Compatible

Auto Finalize

Disc Full
End of Timer Rec

Disc Full

ON
OFF

General Setting

Playback
Display
Video
Recording
Clock
DivX
HDMI
Reset All

Auto Chapter
Recording Audio Select (XP)
Auto Finalize
Aspect Ratio (Video mode)
Dubbing Mode
Make Recording Compatible

Auto Finalize

Disc Full
End of Timer Rec

End of Timer Rec

ON
OFF

Your setting will be activated.

6

Press [SETUP] to exit.

You can finalize discs automatically using this function.
You can use this function to finalize discs after finishing
all timer recordings and at the end of the disc space.

Auto Finalizing

SE-R0295

OPEN/
CLOSE

INPUT

SELECT

HDMI

.@/: ABC

GHI

PQRS TUV

SPACE

SETUP DISPLAY AUDIO

TIMER
PROG.

DISC MENU

CLEAR RETURN

TOP MENU

WXYZ

SAT.LINK

JKL MNO

DEF

TRACKING

ENTER

INSTANT

SKIP

PLAY

DVDVCR

PAUS E

REV

SKIP

STOP

SKIP

FWD

1.3x/0.8x
PLAY

TIME SLIP

TIMER SET ZOOMSEARCHREPEAT

RECREC MODEDUBBING

ENTER

SETUP

E9KGBUD_D-KVR20KU_EN.indd 30E9KGBUD_D-KVR20KU_EN.indd 30 2008/05/27 16:10:262008/05/27 16:10:26