High Quality Original Manuals for you
Visit us on the Internet
sales@manuals-for-you.com
To set up a Two CO Line
Connection:
While on an outside call established
on a CO button, press the
Press another CO button and dial a
telephone number.
Press button after
the called answers.
button
again, then hang up.
The two outside parties are
conversing.
U I C K
G U I D E
STRATA DK
To enter a Forced
Account Code:
To redial the Last
Number Dialed:
Access an outside line by dialing a
line access code or pressing a
CO or
Enter the Forced Account Code.
Listen for dial tone.
Dial a telephone number.
To enter a Voluntary
Account Code:
After seizing a CO line or while on
a call: Press the
or dial * 5 0; or press the
Enter the Account Code
To activate Automatic
Busy Redial:
After dialing an outside telephone
number, press the
or press the
and dial 4 4.
Your telephone will signal you
when the called number becomes
not busy.
To cancel Automatic Busy Redial,
press the
the button and dial 4 4.
button.
button;
button and dial 4 6.
ARR
button,
button
ARR
button, or press
Lift the handset and press any
available CO button.
Press the
To “Save” a number to
redial later:
Any time after dialing a telephone
To redial a “Saved”
number:
Access an outside line, then press
To store a Speed Dial
number:
Press the
Press the
Enter the telephone number, then
RDL
(or button.
number and before disconnecting
the call, press the
the
the
store the telephone number on, or
dial a Speed Dial access code
(1 0
Dial, 6 0 9 9 for System
Speed Dial) where you want to
store the number.
press the
button.
RDL
(or button, then
SDS
button.
SD
button you want to
4 9 for Station Speed
RDL
button.
(or #) button.
To activate Automatic
Callback:
After dialing a busy station or
station in the Do Not Disturb
mode, press the
dial 4.
-Hang up. The system will call you
back when the station becomes
available.
button or
To make a call with
Speed Dial:
Access an outside line.
Press a
SD
button, or press the
SDS
(or button and dial a
Speed Dial access code
(1 0
4 9 for Station Speed
Dial, 6 0
9 9 for System Speed
To leave a Message
Waiting Indication at
another station:
After reaching a busy or
unanswered station, press the
button.
To answer a Message
Waiting Indication at your
station:
The Message Waiting Indication is
indicated by a flashing
LED.
Lift the handset, press the
button, then press the
button to call back the station or
voice mail device that left the
indication.
To make a Busy Override
or Executive Override
call:
To set Call Forward with
a Call Forward button:
Press a Call Forward button:
CFAC, CFB,
Enter the station number to which
calls will forward.
Press the Call Forward button
again.
To set Call Forward with
an access code:
Press the button and dial a
Call Forward access code: Call
Forward-All Calls, 6 0 4; Call
Forward-Busy, 6 0 2; Call
Forward-No Answer, 6 0 3; Call
Forward-Busy/No Answer, 6 0 4.
Enter the number of the station to
which calls will forward.
Press the
SPKR
or
button.
To make a Busy Override call, dial
2 after dialing a busy station.
To make an Executive Override
(barge-in) call, dial 3 after
reaching a busy station.
To make a Page
announcement:
.
Lift the handset and press the
button.
To page all stations in the All Call
Page group, dial 3 0; station
groups, dial 3
Page group with external page
zones optionally included, dial
3 9; external page zones, dial
35-38.
1
3 4; the All Call
To cancel Call Forward:
Press the same Call Forward
button that you used to set Call
Forward; or press the
button, dial 6 0
SPKR
To Park a call:
While on a call, press the
To retrieve the Parked
call:
Press the button and dial 4 2.
1,
then press the
button.
button and dial 4
To Pick Up a call:
Press the
To pick up a call that is ringing or
To Transfer a call:
While on a call, press the
If the station is idle: Wait for the
If the station is busy: Hang up.
To make a Conference
Call:
While on a call, press the
To add an outside line to the call,
Press the
PKUP
button or dial 5.
held at a station, dial the station
number; for an intercom page or
ringing door phone, dial 3 0; on
an external page, dial 3 5; for a
CO line on hold, dial 7 0
7 3 6; for any ringing CO line,
dial 9.
TRNS
button and dial a station
number.
station to answer, make a voice
announcement and hang up.
TRNS
button.
access an outside line and dial a
telephone number; to add a
station to the call, dial a station
number.
after the called party answers. All
parties are
1
button
together.
To place a call on
Exclusive Hold:
Press the
To receive a Handsfree
Answerback call:
Without lifting the handset, speak
To use Handsfree
Monitoring:
While holding down the
Release the
To make an outside call:
HOLD
No one can accidentally pick up
your call.
You will hear a single warning tone
followed by the caller’s voice.
toward the telephone at a normal
voice level to answer the caller.
button during a call, place the
handset on-hook.
Lift the handset to resume the
conversation.
Press a CO or button; or, press
the
INT
access code (7 0
8 1 -8 8,
Dial a telephone number, and lift
the handset when the called party
answers.
button twice.
SPKR
SPKR
button and dial a line
button.
I- 7 3 6,
or 9).
To activate/deactivate
Do Not Disturb:
To activate, press the
so that the LED lights; to
deactivate, press the button again
so that the LED turns off.
DND
button
To make a call to another
station:
Lift the handset and press the
button.
Dial a station number.
Loading...