Toshiba DK16, DK8 User Manual

Specifications and Main Features

  • The required input power is 117VAC nominal (85VAC ~ 135VAC) at a frequency of 50/60 and current of 15 amps.
  • The maximum number of KSU87-pole stations is ten through DK8 and 4 CO lines.
  • In regards to the DK16 base KSU, the number of stations supported is 12, with 4 CO lines available.
  • DK16 Expansion Unit has a maximum capacity of up to twentystations and eight CO lines.
  • The four standard Digital Telephone Circuits DK8 are 4 and the optional QCDU increases it by two.
  • DK8 gives offers 2 as standard and 16 for CO Line Circuits, 4 as standard and is enhanced by PCUs.
  • The following peripherals have been supported: Music-On-Hold source, Reserve battery, paging siren amplifier and spekaer, external paging systems.
  • The environmental requirements include operational temperatures of 0 to 40 degrees Celsius, Humidity at a maximum of 80 percent without condensation and storage temperatures range from -20 to 70 degrees Celsius.
  • DK8 model has a power supply unit providing 24VDC and +5VDC whereas DK16 supplies (-26.3 ~ -27.8VDC) and (+4.5 ~ +5.5 VDC)
  • DK16 dimensions are approximately 416.97mm x 4mm x 76.2mm providing the provision for varying size options.
  • Several options are available with regard to PCB offering extended capabilities and functions, such as QCDU, QSTU, QRCU, QCNU and QSMU.
  • There are available integrated options for Remote Maintenance which allows control from far off.
  • Emergency Backup: An optional reserve power battery and charger are available in the event of a power failure.

Frequently Asked Questions

Q: What is the required power for STRATA DK8 and DK16?

A: Input power source of 117VAC nominal (85VAC ~ 135VAC), 50/60 Hz, 15 amps will be required.

Q: How many stations can be used on DK8 and DK16 ?

A: The DK8 can accommodate a maximum of 10 stations and 4 CO lines, whereas, the DK16 can accommodate a maximum of 12 stations and 4 CO lines. The capacity can be increased to 20 stations and 8 CO lines buy purchasing an Expansion Key Service Unit.

Q: Which peripherals have the capacity to be connected to DK8 and DK16 systems?

A: The compatible peripherals comprise of Music-on-hold source, reserve power battery and charger, standard emergency telephone for power cut, and paging systems with speaker and amplifier.

Q: What environmental conditions are necessary for these systems to function properly?

A: In a temperature suitable range of 32 ~ 104 degree Fahrenheit (0 ~ 40 degree Celsius) and humidity suitable range of 20 ~ 80 percent Relative Humidity with no condensation, the systems are expected to work optimally.

Q: Is there a way to remotely maintain these units?

A: Yes, Provinet says that the systems has incorporated provisions for remote maintenance capabilities.

Q: How are emergency measures integrated into the power systems in case of an outage?

A: With regard to power loss, the DK8 system is equipped with an optional battery backup and a charger (HPFB). On the other hand, the DK16 allows the user to connect any of the supplied 12-volt batteries for the purpose.

User Manual

Page 1
Toshiba DK16, DK8 User Manual
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Page 29
Page 30
Page 31
Page 32
Page 33
Page 34
Page 35
Page 36
Page 37
Page 38
Page 39
Page 40
Page 41
Page 42
Page 43
Page 44
Page 45
Page 46
Page 47
Page 48
Page 49
Page 50
Page 51
Page 52
Page 53
Page 54
Page 55
Page 56
Page 57
Page 58
Page 59
Page 60
Page 61
Page 62
Page 63
Page 64
Page 65
Page 66
Page 67
Page 68
Page 69
Page 70
Page 71
Page 72
Page 73
Page 74
Page 75
Page 76
Page 77
Page 78
Page 79
Page 80
Page 81
Page 82
Page 83
Page 84
Page 85
Page 86
Page 87
Page 88
Page 89
Page 90
Page 91
Page 92
Page 93
Page 94
Page 95
Page 96
Page 97
Page 98
Page 99
Page 100
Loading...