Toshiba AT10LE-A User Manual

User's Manual
Excite

Table of Contents

Chapter 1
Chapter 2
Chapter 3
Legal & Regulatory
Copyright ................................................................................................ 1-1
Disclaimer .............................................................................................. 1-1
Trademarks ............................................................................................ 1-2
H.264/AVC, VC-1 and MPEG-4 License Notice ................................... 1-2
FCC information .................................................................................... 1-3
CE compliance ....................................................................................... 1-4
Working environment ............................................................................ 1-4
Additional environments not related to EMC ...................................... 1-5
REACH - Compliance Statement .......................................................... 1-5
Following information is only valid for EU-member States: ............. 1-6
Following information is only for India ............................................... 1-7
Canadian regulatory information (Canada only) ................................ 1-7
Canada - Industry Canada (IC) ............................................................. 1-7
Following information is only for Turkey: ........................................... 1-7
Introduction
About the guide ..................................................................................... 2-1
Instruction Manual for Safety and Comfort ......................................... 2-1
Safety icons ........................................................................................... 2-1
Getting Started
Check the components ......................................................................... 3-1
Grand tour .............................................................................................. 3-1
Hardware ................................................................................................ 3-5
Using the tablet for the first time ......................................................... 3-6
Care and use of the battery ................................................................ 3-10
Charging the battery ........................................................................... 3-11
Chapter 4
User's Manual ii
Using the touch screen ......................................................................... 4-1
Using the Digitizer Pen ......................................................................... 4-1
Getting to know the Home screen ....................................................... 4-4
Opening and switching applications ................................................... 4-6
Monitoring your tablet’s status ............................................................ 4-6
Quick Settings ....................................................................................... 4-7
Managing Notifications ......................................................................... 4-8
Locking your screen ............................................................................. 4-9
Capturing your screen .......................................................................... 4-9
Customizing the Home screen ............................................................. 4-9
Changing the Screen Orientation ...................................................... 4-11
Managing Tasks and Applications ..................................................... 4-11
Connecting to a computer .................................................................. 4-11
Factory Reset ....................................................................................... 4-12
Chapter 5
Chapter 6
Applications
Analog clock .......................................................................................... 5-1
Browser .................................................................................................. 5-1
Calculator ............................................................................................... 5-3
Calendar ................................................................................................. 5-4
Camera ................................................................................................... 5-4
Clock ....................................................................................................... 5-6
Downloads ............................................................................................. 5-7
Email ....................................................................................................... 5-7
Gallery .................................................................................................... 5-9
The Google Play™ Music App ............................................................ 5-10
People ................................................................................................... 5-10
Service Station .................................................................................... 5-11
TOSHIBA Media Player ....................................................................... 5-13
TOSHIBA File Manager ....................................................................... 5-14
TruNote ................................................................................................. 5-17
TruCapture ........................................................................................... 5-17
Online Manual ...................................................................................... 5-18
Settings
Wireless & networks ............................................................................. 6-1
Device ..................................................................................................... 6-8
Personal ............................................................................................... 6-16
Accounts .............................................................................................. 6-20
System .................................................................................................. 6-21
Chapter 7
Optional Accessories
Memory media slot ................................................................................ 7-1
SIM card slot .......................................................................................... 7-3
USB device ............................................................................................. 7-4
HDMI device ........................................................................................... 7-5
TOSHIBA Keyboard Cover .................................................................... 7-6
Optional TOSHIBA Accessories ........................................................ 7-11
User's Manual iii
Chapter 8
Troubleshooting
Problem solving process ...................................................................... 8-1
Hardware and system checklist ........................................................... 8-2
TOSHIBA Support .................................................................................. 8-4
Chapter 9
Chapter 10
Specifications
Physical Dimensions ............................................................................ 9-1
Environmental Requirements .............................................................. 9-1
Information for Wireless Devices
Wireless Technology Interoperability ............................................... 10-1
CAUTION about Wireless Devices ..................................................... 10-1
Wireless Devices and your health ..................................................... 10-2
Radio Regulatory Information ............................................................ 10-2
Device Authorization ........................................................................... 10-7
Radio approvals for wireless devices ............................................... 10-7
User's Manual iv
Legal & Regulatory

Copyright

© 2013 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein.
First edition May 2013

Disclaimer

This manual has been validated and reviewed for accuracy. The instructions and descriptions it contains are accurate for this device at the time of this manual’s production. However, succeeding devices and manuals are subject to change without notice. TOSHIBA assumes no liability for damages incurred directly or indirectly from errors, omissions or discrepancies between this device and the manual.
This product incorporates copy protection technology that is protected by U.S. and foreign patents, including patent numbers 5,315,448; 5,583,936; 6,836,549; and 7,050,698 and other intellectual property rights. The use of Rovi Corporation's copy protection technology in the product must be authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, TOSHIBA CORPORATION, ITS AFFILIATES AND/OR SUPPLIERS (“TOSHIBA”) DISCLAIM ALL WARRANTIES WITH REGARD TO THE SOFTWARE, EITHER EXPRESSLY -IMPLIED, OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF NONINFRINGEMENT OF THIRD PARTY RIGHTS, AND THE IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. TOSHIBA SHALL NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE.
Notwithstanding the above, portions of the software include software files subject to certain open source license agreements, and such open source software files are subject to the notices and additional terms and conditions that are referenced in the End User License Agreement (“EULA”) shown in “Toshiba Legal Information” section of the “Legal information” available
Chapter 1
User's Manual
1-1
under the “About tablet” in the “Settings” app. Such open source software files are provided on an “AS IS” basis to the maximum extent permitted by applicable law.
Please carefully read “Open source licenses” section of the “Legal Information” available under the “About tablet” in the “Settings” app for the relevant copyright and licensing terms. If there is any discrepancy between the terms and conditions of the applicable open source license agreement and the EULA, the terms and conditions of the applicable open source license agreement prevail with respect to the applicable open source software.
Until the date that is three years after you acquired the Software, you may obtain a copy of the source code corresponding to the binaries for GPL­licensed file by sending a request to TOSHIBA customer service at [http:// support.toshiba-tie.co.jp/android/index_e.htm], and TOSHIBA will send you a link to such source code.

Trademarks

Android, Google, Google Play, Chrome, Google Talk, Google Maps and other marks are trademarks of Google Inc.
Availability of Google applications, services, and features may vary by country, carrier, phone model, and manufacturer.
Bluetooth is a trademark owned by its proprietor and used by TOSHIBA under license.
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
Secure Digital and SD are trademarks of SD Card Association.
Adobe, Adobe PDF and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
DTS, the DTS symbol, & DTS and the symbol together are registered trademarks and DTS Premium Voice Pro is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.
Other trademarks and registered trademarks not listed above may be used in this manual.

H.264/AVC, VC-1 and MPEG-4 License Notice

THIS PRODUCT IS LICENSED UNDER THE AVC, THE VC-1 AND MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i)ENCODING VIDEO IN COMPLIANCE WITH THE AVC STANDARD ("VIDEO") AND/ OR (ii)DECODING AVC, VC-1 AND MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON­COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE SUCH VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE.
User's Manual
1-2
ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA,L.L.C. SEE http:// www.mpegla.com

FCC information

FCC notice "Declaration of Conformity Information"

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the device’s Universal Serial Bus (USB 2.0) ports and microphone/ headphone combo jack. Changes or modifications made to this equipment, not expressly approved by TOSHIBA or parties authorized by TOSHIBA could void the user’s authority to operate the equipment.

FCC conditions

User's Manual
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
1-3

Contact

Address: TOSHIBA America Information Systems, Inc.
9740 Irvine Boulevard
Irvine, California 92618-1697
Telephone: (949) 583-3000

Caution: Exposure to Radio Frequency Radiation.

The radiated output power of the Wireless LAN is far below the FCC radio frequency exposure limits. Nevertheless, the Wireless LAN shall be used in such a manner that the potential for human contact during normal operation is minimized.
In the usual operating configuration, the distance between the antenna and the user should not be less than 20cm. Please refer to the "Grand Tour" section in this manual for the details regarding antenna location.
The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website.

CE compliance

This product is carrying the CE-Mark in compliance with the related European Directives. Responsible for CE­Marking is Toshiba Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany. The complete and official EU Declaration of Conformity can be found on TOSHIBA’s web site http://epps.toshiba-teg.com on the Internet.

Working environment

The Electromagnetic Compliance (EMC) of this product has been verified typically for this product category for a so called Residential, Commercial & Light Industry Environment. Any other working environment has not been verified by Toshiba and the use of this product in these working environments is maybe restricted or cannot be recommended. Possible consequences of the use of this product in non verified working environments can be: Disturbances of other products or of this product in the nearby surrounding area with temporarily malfunction or data loss/ corruption as result. Example of non verified working environments and related advices:
Industrial environment (e.g. where 3-phase 380V mains is being used mainly): Danger of disturbances of this product due to possible strong electromagnetic fields especially near to big machinery or power units.
User's Manual
1-4
Medical environment: The compliance to the Medical Product Directive has not been verified by Toshiba, therefore this product cannot be used as a medical product without further verification. The use in usual office environments e.g. in hospitals should be no problem if there is no restriction by the responsible administration.
Automotive environment: Please search the owner instructions of the related vehicle for advices regarding the use of this product (category).
Aviation environment: Please follow the instructions of the flight personnel regarding restrictions of use.

Additional environments not related to EMC

Outdoor use: As a typical home/office equipment this product has no special resistance against ingress of moisture and is not strong shock proofed.
Explosive atmosphere: The use of this product in such special working environment (Ex) is not allowed.

REACH - Compliance Statement

The new European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007. Toshiba will meet all REACH requirements and is committed to provide our customers with information about the chemical substances in our products according to REACH regulation.
Please consult the following website www.toshiba-europe.com/computers/ info/reach for information about the presence in our articles of substances included on the candidate list according to article 59(1) of Regulation (EC) No 1907/2006 („REACH“) in a concentration above 0.1% weight by weight.
User's Manual
1-5
Following information is only valid for EU­member States:

Disposal of products

The crossed out wheeled dust bin symbol indicates that products must be collected and disposed of separately from household waste. Integrated batteries and accumulators can be disposed of with the product. They will be separated at the recycling centres.
The black bar indicates that the product was placed on the market after August 13, 2005.
By participating in separate collection of products and batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health.
For more detailed information about the collection and recycling programmes available in your country, please visit our website (http://eu.computers.toshiba-europe.com) or contact your local city office or the shop where you purchased the product.

Disposal of batteries and/or accumulators

The crossed out wheeled dust bin symbol indicates that batteries and/or accumulators must be collected and disposed of separately from household waste.
If the battery or accumulator contains more than the specified values of lead (Pb), mercury (Hg), and/or cadmium (Cd) defined in the Battery Directive (2006/66/ EC), then the chemical symbols for lead (Pb), mercury (Hg) and/or cadmium (Cd) will appear below the crossed out wheeled dust bin symbol.
By participating in separate collection of batteries, you will help to assure the proper disposal of products and batteries and thus help to prevent potential negative consequences for the environment and human health.
For more detailed information about the collection and recycling programmes available in your country, please visit our website (http://eu.computers.toshiba-europe.com) or contact your local city office or the shop where you purchased the product.
User's Manual 1-6
These symbols may not stick depending on the country and region where you purchased.

Following information is only for India

The use of this symbol indicates that this product may not be treated as household waste.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
For more detailed information about recycling of this product, please visit our website (http://www.toshiba­india.com) or contact call center (1800-200-8674).

Canadian regulatory information (Canada only)

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulation of the Canadian Department of Communications.
Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment.
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la class B respecte toutes les exgences du Règlement sur le matériel brouileur du Canada.

Canada - Industry Canada (IC)

This device complies with RSS 210 of Industry Canada.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
The term "IC" before the equipment certification number only signifies that the Industry Canada technical specifications were met.

Following information is only for Turkey:

Compliant with EEE Regulations: Toshiba meets all requirements of Turkish regulation 26891 “Restriction of the use of certain hazardous substances in electrical and electronic equipment”.
User's Manual
1-7
The number of possible pixel failures of your display is defined according to ISO 9241-307 standards. If the number of pixel failures is less than this standard, they will not be counted as defect or failure.
Battery is a consumption product, since the battery time depends on the usage of your tablet. If the battery can not be charged at all, then it is a defect or failure. The changes in battery time is not a defect or failure.
User's Manual 1-8
Chapter 2
Introduction
Welcome and thank you for choosing a TOSHIBA product.

About the guide

We recommend making a backup of this User's Manual in case of future reference.
Please backup your personal data saved in the internal storage before updating the platform.

Instruction Manual for Safety and Comfort

All important information on the safe and proper use of this tablet is described in the enclosed Instruction Manual for Safety and Comfort. Be sure to read it before using the tablet.

Safety icons

Safety icons are used in this manual to bring important information to your attention. Each type of icon and its implication are identified as shown below.
Indicates a potentially hazardous situation, which could result in death or serious injury, if you do not follow instructions.
Pay attention! A caution informs you that improper use of equipment or failure to follow instructions may cause data loss or damage your equipment.
Please read. A note is a hint or advice that helps you make best use of your equipment.
User's Manual 2-1
Getting Started
This chapter provides a general overview of your tablet and some basics before using your tablet.
Some of the features described in this manual may not function properly if you use an operating system that was not pre-installed by TOSHIBA.

Check the components

Check to make sure you have all of the following items:

Hardware

TOSHIBA Tablet AC adaptor (2-pin or 3-pin) Power cable Digitizer Pen (provided with some models) Toshiba Keyboard Cover (Bluetooth Keyboard; provided with some
models)
Digitizer Pen is included together with spare pen tips and a tip removal tool in the small case coming with the product.
Chapter 3

Documentation

If any of the items is missing or damaged, contact your dealer immediately.

Grand tour

Please handle your product carefully to avoid scratching or damaging the surface.
The following figure shows each important part of your tablet.
User's Manual
Quick Start Guide Instruction Manual for Safety and Comfort Warranty information
3-1
Figure 3-1 Grand tour of the tablet
4 5 4
15
14
17
18
14
14
16
2 13
12
14
7
6
11
8
13
10
9
19
1. Display screen 2. Web Camera (front)
3. Ambient light sensor (not shown) 4. Microphones
5. Power button 6. Headphone/Microphone combo jack
7. Volume down/up button 8. Memory media slot
9. SIM card slot* 10. Micro HDMI port
11. Micro USB port 12. DC IN 12V jack
13. Interface Protection cover 14. Speakers
15. Strap hole for pen 16. Wireless communication antennas (not
19. NFC antenna (not shown)*
* Provided with some models. Product appearance depends on the model you purchased.
Display screen Display screen brightness can be adjusted
17. Camera (back) 18. Camera flash
manually and automatically controlled by panel power saving technology.
shown)
Under certain operating conditions, e.g., very high ambient temperatures, your tablet might automatically dim the LCD brightness in order to maintain a reasonable system temperature. The brightness would be dim obviously following display content changes with a lot of bright color, for example, white, yellow, etc. This is a normal protective feature and you might not be
User's Manual 3-2
able to manually adjust the LCD brightness during the auto dimming
Mic
Ground
Right
Left
period.
Camera Your tablet is equipped with a front Web Camera
and a back camera used for recording video or taking photographs.
Both cameras may have different resolutions.
Ambient light sensor Ambient light sensor can detect the light quality
and intensity outside and can use this information to automatically adjust the display screen brightness.
Microphones Built-in microphones allow you to record sounds.
Some applications may support stereo recording.
Power button Press & hold this button to turn on/off the tablet.
Headphone/ Microphone combo jack
A 3.5 mm mini headphone/microphone combo jack enables connection of a monaural microphone or stereo headphone.
The external microphone will be disabled if you use a 4-pin headset other than the type as shown below.
Volume down/up button
Press either of the buttons to decrease or increase the volume.
Micro HMDI port Micro HDMI port can connect to HDMI cable with
Type D connector.
An HDMI cable sends video and audio signals.
Please refer to the HDMI device section in "Optional Accessories" chapter for details.
SIM card slot This slot lets you insert a single SIM card which
enables a high-speed access to the Internet, corporate Intranet and your email while you are away from the office.
User's Manual 3-3
Memory media slot This slot lets you insert a micro SD™ Card which
enables you to transfer data from devices, such as digital camera, onto your tablet.
Please refer to the Memory media slot section in "Optional Accessories" chapter for details.
Keep foreign metal objects, such as screws, staples and paper clips, out of the memory media slot. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury.
Micro USB port The tablet acts both as a host and a client via this
port. It allows you to connect the tablet to a computer for transferring data. When acting as a host, the tablet can fast and directly communicate with other client devices without the assistance of a computer.
Please refer to the USB device section in "Optional Accessories" chapter for details.
Interface protection cover
The interface protection cover provides protections to your port and slot.
DC IN 12V jack The AC adaptor connects to this jack in order to
power the tablet and charge its internal batteries. Please note that you should only use the model of AC adaptor supplied with the computer at the time of purchase - using the wrong AC adaptor can cause damage to the tablet.
Speakers The speakers emit sound generated by your
software as well as audio alarms, such as low battery condition, generated by the system.
Strap hole for pen This hole is used for hanging your Digitizer Pen
with a rope.
Wireless communication
The tablet is equipped with a Wireless LAN, Bluetooth and 3G antennas.
antennas
Camera flash This LED flash can be used as a light source
when the ambient light is not bright.
NFC antenna The tablet may be equipped with an NFC
antenna.
User's Manual 3-4

Hardware

This section identifies various components and the hardware of the tablet ­it is recommended that you become familiar with each before you operate the tablet.
The actual specifications may vary depending on the model you purchased.

Processor

This tablet does not support CD/DVD/Blu-ray Disc™.
Content that is copyright protected or has limited access rights, cannot be played on this tablet.
CPU
Under certain operating conditions, e.g., very high ambient temperatures, your tablet might automatically make slow down the system performance in order to maintain a reasonable system temperature. This is a normal protective feature and you might not be able to manually adjust the system performance during this period.
Your tablet is equipped with an NVIDIA® Tegra™ 4 Mobile Processor.

Memory

Memory on board This tablet is equipped with a 2GB memory on
board. The actual amount of usable system memory will be less than the installed memory modules. This tablet does not support memory expansion.
Flash Memory This tablet is equipped with a flash memory.

Power

Battery The tablet is powered by one lithium-ion battery.
AC adaptor The AC adaptor provides power to the system
and charges the battery when it is low.
As the AC adaptor is universal, it can receive a range of AC voltages from 100 to 240 volts, however you should note that the output current varies among different models. Using the wrong adaptor might damage your tablet.
User's Manual 3-5

Display

The tablet's internal display panel supports high-resolution video graphics and can be set to a wide range of viewing angles for maximum comfort and readability.
Display panel 25.7cm (10.1") LCD screen configured with the
following resolution:
2560 horizontal x 1600 vertical pixels
Graphics controller The graphics controller maximizes display
performance.

Multimedia

Web Camera Web Camera is a device that allows you to
record video or take photographs with your tablet. You can use it for video chatting or video conferences by using a communication tool.

Communications

Bluetooth Bluetooth wireless communication function
eliminates the need for cables between electronic devices such as computers, printers and mobile phones. When it is enabled, Bluetooth will provide the wireless personal area network environment which is safe and trustworthy, that is quick and easy.
Wireless LAN The tablet is equipped with a Wireless LAN/
Bluetooth combo module that is compatible with other Wireless LAN systems based on Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing radio technology that complies with the IEEE 802.11 Standard.
3G Some models are equiped with a 3G module.
NFC Some models are equiped with a NFC (Near
Field Communication) module. It allows data share between proximate devices.

Using the tablet for the first time

This section provides basic information about how to start using your tablet. It covers below steps followed by the details.
Connecting the AC adaptor Turning on the power Initial Setup
User's Manual
3-6
Turning off the power
Use a virus-check program and make sure it is updated regularly.
Never format storage media without checking its content - formatting destroys all stored data.
It is a good idea to periodically backup internal storage of the tablet to an external media. General storage media is not durable or stable over long periods of time and under certain conditions may result in data loss.

Connecting the AC adaptor

When battery power becomes low, you must charge it.
Use only the tablet connected to an AC power source to charge the battery. Never attempt to charge the battery with any other charger.
The AC adaptor can automatically adjust to any voltage ranging from 100 to 240 volt and to a frequency of either 50 or 60 hertz, enabling you to use this product in almost any country/region. The adaptor converts AC power to DC power and reduces the voltage supplied to this tablet.
Attach the AC adaptor when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery will need to be charged before you can operate from battery power.
Always use the TOSHIBA AC adaptor that was included with your tablet, or use AC adaptors specified by TOSHIBA to avoid any risk of damage to the tablet. Use of an incompatible AC adaptor could cause fire or damage to the tablet possibly resulting in serious injury. TOSHIBA assumes no liability for any damage caused by use of an incompatible adaptor.
Never plug the AC adaptor into a power source that does not correspond to both the voltage and the frequency specified on the regulatory label of the unit. Failure to do so could result in a fire or electric shock, possibly resulting in serious injury.
When you connect the AC adaptor to the tablet, always follow the steps in the exact order as described below. Connecting the plug to a live electrical outlet should be the last step otherwise the DC output plug could hold an electrical charge and cause an electrical shock or minor bodily injury when touched. As a general safety precaution, avoid touching any metal parts.
User's Manual 3-7
Never place your tablet or AC adaptor on a wooden surface, furniture,
2-pin
3-pin
1
2
or any other surface that could be marred by exposure to heat since the tablet base and AC adaptor's surface increase in temperature during normal use.
Always place your tablet or AC adaptor on a flat and hard surface that is resistant to heat damage.
1. Connect the power cord to the AC adaptor.
Figure 3-2 Connecting the AC adaptor 1
Depending on the model, either a 2-pin or 3-pin AC adaptor will be bundled with the tablet.
2. Connect the AC adaptor’s output plug to the DC IN 12V jack on your tablet.
Figure 3-3 Connecting the AC adaptor 2
3. Plug the AC adaptor into a live wall outlet.

Turning on the power

This section describes how to power up your tablet.
Press & hold the Power button for two seconds to turn on the tablet.
User's Manual
3-8
Figure 3-4 Turn on the tablet
1

Initial Setup

The Setup Screen will be the first screen displayed when you turn on the power. Setup your tablet according to the following steps:
1. Choose your preferred system language and tap Start to begin with the initial setup process.
2. Connect to a Wi-Fi network. You can tap Skip and turn Wi-Fi on later in Settings app.
3. Sign in with a Google™ account.
If you don’t have one, tap No.
4. Register for a Google account by tapping Get an account.
You can also skip this step by tapping Not now.
5. Choose whether to use Google Location Service™ and tap continue.
6. If the tablet is not connected to a Wi-Fi network, set the date and time and tap
7. Enter your name to personalize some apps. Tap to continue.
8. Tap Learn more to read the privacy policy and other terms. Tap to agree.
9. Your tablet is now set up and ready to use. Tap Finish to exit Setup Screen.
to continue.
to
User's Manual

Turning off the power

If you are not going to use your tablet for a long time, shut it down. You can also turn the LCD off in order to extend battery life.
Shut down the tablet
When you shut down the tablet, no data will be saved. The tablet will boot to the operating system's main screen the next time it is turned on.
1. If you have entered data, either save it to flash memory or to other storage media.
3-9
Never turn off the power while an application is running. Doing so could cause loss of data.
Never turn off / disconnect the power , or remove external storage media during data read/write. Doing so can cause data loss.
2. Turn off and remove any peripheral devices connected to the tablet.
3. Press & hold Power button for two seconds and select Power off and then OK to turn off the tablet.
In any emergency case, you can also press & hold Power button for about 6 seconds to force power off.
Do not turn the tablet back on immediately - wait a short period to avoid any potential damage.
Turning the LCD off/on
You can turn the LCD off (while the system is still running) in one of the following ways:
To turn it off manually: Press Power button. To turn it off automatically: Set the sleep timeout in Settings app.
To turn the LCD on:
Press Power button once again.
Unlocking your screen
After turning on the LCD, the screen remains locked. You can unlock the screen in the following way:
Press & hold the lock icon ( ) and slide it across the unlock icon (
).
You can also slide across other icons to allow quick and easy access from the lock screen.
If you have set up a screen lock other than Slide, the method of unlocking the screen will be different. See Security section for other ways to protect your tablet and privacy.

Care and use of the battery

This section provides the important safety precautions in order to handle your battery properly.
Refer to the enclosed Instruction Manual for Safety and Comfort for detailed precautions and handling instructions.
User's Manual
3-10
The lithium ion battery can explode if not handled or disposed of properly. Dispose of the battery as required by local ordinances or regulations.
Charge the battery only in an ambient temperature between 5 and 35 degrees Celsius. Otherwise, the electrolyte solution might leak, battery performance might deteriorate and the battery life might be shortened.
Never try to remove or replace the battery by yourself which may possibly result in serious injury. Please contact an authorized Toshiba service provider, if necessary.

Charging the battery

When the battery power becomes low, you must charge it to avoid losing any data.

Procedure

You can charge the battery when the tablet is either on or off by connecting the AC adaptor.
Off
An icon shaped like an actual battery - a battery meter with flashing borders appears in the center of the screen allowing you to keep track of the battery level. When the battery is fully charged, the meter reaches its full capacity.
On
Likewise, a battery meter on the right side of the System Bar indicates the battery level.

Battery charging time

The following table shows the approximate time required to fully charge a discharged battery when the AC adaptor is connected to the tablet.
Battery type Charging time
Battery (2 cell, 31.3Wh) about 8 hours
Please be aware that the charging time when the tablet is on is affected by ambient temperature, the temperature of the tablet and how you are using the tablet - for example if you make heavy use of external devices then the battery might get scarcely charged up.

Battery exhausted time

The following table shows the approximate exhausted time of a fully charged battery.
User's Manual
3-11
Battery type Time
Battery (2 cell, 31.3Wh) about 10 hours (in use)
about 9 days (sleep mode)
Please be aware that the battery exhausted time will be affected by how you are using the tablet.

Battery charging notice

The battery may not begin charging immediately under the following conditions:
The battery is extremely hot or cold (if the battery is extremely hot, it might not charge at all). To ensure the battery charges to its full capacity, you should charge it at room temperature of between 5°C to 35°C (41°F to 95°F).
The battery is nearly completely discharged. In this instance, the tablet can’t be turned on immediately. You should leave the AC adaptor connected for a few minutes and the battery should begin charging. A
battery meter icon (
The indicator may show a rapid decrease in battery operating time when you try to charge a battery under the following conditions:
The battery has not been used for a long time. The battery has completely discharged and been left unattended for a
long time.
In such cases you should follow the steps as detailed below:
1. Fully discharge the battery when powered on until the system automatically turns the tablet off.
2. Connect the AC adaptor to the Micro USB port on the tablet, and to a wall outlet that is supplying power.
3. Charge the battery until the battery meter reaches its full capacity.
Repeat these steps two or three times until the battery recovers normal capacity.
) will appear indicating the charging status.
User's Manual
3-12
Basics
This chapter describes the basic operations of your tablet and the Home screen.

Using the touch screen

You can use your finger to manipulate icons, buttons, menu items, the onscreen keyboard, and other items on the touch screen.
Tap
Simply tap your finger on the touch screen to act on items on the screen, such as application and settings icons, to type letters and symbols using the onscreen keyboard, or to tap onscreen buttons.
Press & hold
Press & hold an item on the screen until an action occurs.
Drag
Press & hold an item for a moment and then, without lifting your finger, move your finger on the screen until you reach the target position. You can drag items on the Home screen to reposition them.
Swipe or slide
To swipe or slide, you quickly move your finger across the surface of the screen, without pausing when you first touch it (so you don’t drag an item instead). For example, you slide the screen up or down to scroll a list.
Double tap
Tap quickly twice on a webpage, map or other screen to zoom.
Pinch
In some apps (such as Browser and Gallery), you can zoom in/out by placing two fingers on the screen at once and pinching them together or spreading them apart.
Chapter 4

Using the Digitizer Pen

Some models are provided with a Digitizer Pen.
You can use the Digitizer Pen to execute actions and enter data. Hold the Digitizer Pen in a natural position and tap, press or trace on the screen lightly.
User's Manual
4-1
Figure 4-1 Digitizer Pen
3
2
1
1. Eraser button 2. Side button
3. Pen point
Eraser button You can use this button as an eraser in some
applications that support eraser function. These applications enable you to select and delete notes or sketches with a one-touch action.
Side button You can use this button as function button. The
function will be defined by each application.
Pen point You can use pen point to operate same like as by
your finger.
Observe the following precautions on the handling of the Digitizer Pen.
In order to avoid damages to the display screen, please refrain from doing anything other than the specified operation methods. Failure to do so could cause a malfunction or characteristic deterioration.
Do not tap or press the Digitizer Pen forcefully against the display as this could damage the Digitizer Pen and the screen itself.
Avoid using or keeping the Digitizer Pen in areas where the temperature can change rapidly or in places, such as a car, where the Digitizer Pen is exposed to direct sunlight. Store the Digitizer Pen without any pressure being applied to the buttons. Failure to do so could cause a malfunction or characteristic deterioration.
The Digitizer Pen is composed of precision parts. Do not drop the Digitizer Pen. Strong impact causes a malfunction or characteristic deterioration.
Do not apply excessive force to the Digitizer Pen point and the side buttons. Excessive force applied to these parts causes short life or characteristic deterioration.
Avoid water entering the Digitizer Pen or condensation forming within it as either condition will cause a malfunction.
Do not disassemble the Digitizer Pen. It causes maladjustment or short life.
User's Manual 4-2
Do not stain the Digitizer Pen with cosmetics or chemicals as this will cause a deterioration in appearance. Use a glass wiping cloth or dry cloth to clean the Digitizer Pen. Do not use volatile liquids such as alcohol, thinner or petroleum benzine to clean the Digitizer Pen.
Do not apply excessive force to the Digitizer Pen point as a bent or deformed pen point will cause a malfunction.
Keep the small parts of the Digitizer Pen, such as the pen point or the knob of the side buttons, away from infants and small children to prevent the accidental ingestion by them.
Do not use a ball point pen instead of the Digitizer Pen included with the product.
Do not continue to use a broken pen point as this may result in scratching of the display screen.
TOSHIBA is not liable for any problems arising on the products due to the use of the Digitizer Pen in an environment where the above conditions are not satisfied or because of its use by unspecified number of users.

Pen actions

You can use the Digitizer Pen to enter data, start programs, move objects and execute other actions.
Single tap
User's Manual
Lightly tap the tip of the Digitizer Pen on an object and lift it immediately to execute an action.
Double tap
Lightly tap the tip of the Digitizer Pen twice on an object and lift it immediately to execute an action.
Press & hold
Touch the tip of the Digitizer Pen to the display screen and hold it there to display a pop-up menu or other action.
Drag
Touch the Digitizer Pen on the screen. Without lifting the Digitizer Pen, drag it across the screen to select text or objects.
Drag and drop
Touch the Digitizer Pen on the screen to select an object. Without lifting the Digitizer Pen, drag it across the screen. Lift the Digitizer Pen to drop the object to a new location.
4-3
The Pen actions listed above may vary depending on the applications.
1 2

Replacing the pen tip

The pen tip of the Digitizer Pen can be replaced with a new one which is provided when it is worn. To replace the pen tip, follow the steps as described below:
1. Pinch the tip with a draw-out tool and pull it out.
2. Insert a new pen tip into the Digitizer Pen carefully, and press it securely.
Figure 4-2 Replacing the pen tip
1. Pen tip 2. Draw-out tool
Do not continue to use a broken pen tip as this may result in scratching of the display screen. When the pen tip breaks, replace it with one of the refills delivered with the Digitizer Pen. When these refills have run out, you can purchase a new pen set from a TOSHIBA authorized dealer.
Always use the refills delivered with the Digitizer Pen. Use of an incompatible refill may cause a malfunction or characteristic deterioration.
A short and worn pen tip is difficult to pull out. Replace the pen tip with a refill before it becomes too short to remove.
It is recommended that you keep another pen set as a spare. You can buy replacement pen sets from your TOSHIBA authorized dealer.

Getting to know the Home screen

The Home screen is your starting point for using all the installed apps on your tablet. You can customize the Home screen to display the widgets, app shortcuts, wallpapers and other shortcuts you prefer.
User's Manual
4-4
Figure 4-3 Home screen
3
1
2
6 7 8
5 54
1. System bar 2. App shortcuts
3. All Apps 4. Memo button*
5. Favorite tray 6. Back
7. Home 8. Recent apps
* Provided with some models.
Item Description
System bar The System bar is located
permanently at the top of the screen. The notifications icons and notification panel are on the left, and the status icons and quick settings panel are on the right.
App shortcuts Tap to open an app.
All Apps
Tap to see all your apps, widgets, my favorites and my recent apps.
Memo button Tap to save the current screen into
your memo gallery in TruNote app.
Favorite tray The Favorite tray is located at both
left and right side of All Apps. You can move your favorite apps to Favorite tray.
Back Return to the previous screen.
Home
Recent apps Tap to see the thumbnails of your
Return to the default Home screen.
recently used apps.
User's Manual 4-5
Loading...
+ 72 hidden pages