Topp Pro MPA SERIES, PA SERIES User manual
PUBLIC ADDRESS
AMPLIFIER
User's Manual
MPA SERIES
NF03384-2.0
PA SERIES
TABLE OF CONTENTS
INTRODUCTION
01
CONTROL ELEMENT
02
BACK GROUND MUSIC MODULE DESCRIPTION
04
08
BLOCK DIAGRAM
SPECIFICATION
09
CONNECTION DESCRIPTION
10
PUBLIC ADDRESS AMPLIFIER
11
PUBLIC ADDRESS AMPLIFIER
Cassette recorder
Horn speaker
CD player
AM/FM tuner
GND
Mains
Speaker
CONNECTION DESCRIPTION
110-120V~ 220-240V~
POWERCONSUMPTION: 600W
DC
a24V 20A
-
+
25V
4
COM
110-120V~50/60HzFUSE:T12AL 250V
220-240V~50/60HzFUSE:T6.3AL 250V
Sound column
CLASS 2 WIRING
24V
Battery
10
SAFETY RELATED SYMBOLS
Unplug this apparatus during lightning
storms or when unused for long periods
of time.
External Connection
Microphone stand
The symbol is used to indicate that
some hazardous live terminals are
Microphone
involved within this apparatus, even
under the normal operating conditions.
The symbol is used in the service
documentation to indicate that specific
component shall be only replaced by
the component specified in that
Documentation for safety reasons.
Protective grounding terminal.
Alternating current /voltage.
Hazardous live terminal .
8
Phantom
INPUT2
Line MicLine Mic
Phantom
24V
24V
MUTE
SEN.
INPUT1
HOTCOMGND
++
600
TEL.INPUT
TEL.
LEVELLEVEL
LINEOUT
AUX
CLASS 2 WIRING
COMCOMCOM Z1 Z2 Z3 Z4
SINGLEZONE: 120W(MAX)
SINGLE ZONE: 120W(MAX)
TOTALZONE: 240W(MAX)
TOTALZONE:
INPUT4
240W(MAX)
INPUT3
--
1W
PREOUT
AMPIN
100V70V
Line Mic
Line Mic
Phantom
Phantom
24V
24V
ON: Denotes the apparatus turns on.
OFF: Denotes the apparatus turns off, because of using the single pole switch, be sure
to unplug the AC power to prevent any
electric shock before you proceed your
Speaker Tel.signal
service.
WARNING: Describes precautions that
should be observed to prevent the danger
The external wiring connected to the output
hazardous live terminals requires installation
by an instructed person, or the use of readymade leads or cords.
Do not Remove any Cover
There are maybe some areas with high
voltages inside, to reduce the risk of electric
shock, do not remove any cover if the power
supply is connected.
The cover should be removed by the qualified
personnel only.
No user serviceable parts inside.
Fuse
To prevent a fire, make sure to use fuses
with specified standard (current, voltage,
type). Do not use a different fuse or short
circuit the fuse holder.
Before replacing the fuse, turn OFF the
apparatus and disconnected the power
source.
of injury or death to the user.
Protective Grounding
Disposing of this product should
not be placed in municipal waste
and should be separate collection.
Before turning the product ON, make sure that
it is connected to Ground. This is to prevent the
risk of electric shock. Never cut internal or
external Ground wires. Likewise, never remove
Ground wiring from the Protective Ground
Terminal.
Never cut off the internal or external protective grounding wire or disconnect the
wiring of protective grounding terminal.
The apparatus shall be connected to a mains
socket outlet with a protective earthing
connection.
Equalizer
Power amplifier
CAUTION: Describes precautions that
should be observed to prevent danger of the
apparatus.
WARNING
Power Supply
Ensure the source voltage matches the
voltage of the power supply before turning
ON the apparatus.
Loading...