Topp Pro EVENT 2K SYSTEM, EVENT 4K SYSTEM User manual

EVENT 2K SYSTEM / EVENT 4K SYSTEM

Important Safety Instructions

2

Table of Contents

1. INTRODUCTION

2. INSTALLATION TIPS

3. USEFULL DATA

4. QUICK START

5. CONNECT MANNER

6. BACK PANEL DESCRIPTION

7. DSP CONTROL

7. CONNECTION PLATE SYSTEM

8. WIRE CONNECTIONS

9. TECHNICAL SPECIFICATIONS

10. DSP SOFTWARE CONNECTION / IP CONTROL INSTRUCTION

10. GUARANTEE

4

4

4

5

6

8

9

13

15

16

18

19

3

Introduction

1

2

The new cabinets have been designed to provide a cost effective high grade solution while maintainig high
quality cabinet construction and optimum components.
Our Professional Audio Products are designed and tested by a highly qualified engineering team with more
than 20 years of experience. Great care is placed in delivering products with excellent performance,
specifications and dependable reliability. Also great emphasis is placed in creating and bringing to market
products that can fill multiple applications and also offer customers exceptional value.

Every audio product is strictly tested and complied to very strict standards.

Features

- System Type: Active column system with DSP / controls

- Power Rating: Class D RMS:500W*2 / 1000W*2

- DSP MODES: LIVE / MUSIC / FLAT / DJ / SPEECH

- Power Supply: 110-240V ~50/60HZ

- Enclosure Construction: Plywood Cabinet for SUB, Aluminium Cabinet forolumn, Resistant black paint,
metal grille with foam, Rubber feet, integrated side handles

- Mounting: Smart Mounting and Connection

3

4

Quick Start

When mounting a speaker onto any stand, always ensure that the stand is on a flat, level sur-face, with the
legs fully extended. Be sure to check that the maximum load weight for the stands is greater than the weight
of the ARRAY SYSTEMS loudspeaker. Never use a stand with a maximum load weight lower than the speaker.
Do not attempt to mout more than one speaker on a stand at one time.

The ARRAY SYSTEMS loudspeakers are heavy. It is recommended that a second person to help place the
cabinet on a stand.

When the speaker is placed on a stand, always check the integrity and center of gravity of the system If the
speaker can be tipped easily, or the pole is swaying, it is recommended that you lower the height of the
stand. Position the stand and route cables so that the performers and the audience cannot tip over or trip
on the system.

SAT-TP

4

EVENT 2K

SAT-BM

Pole

SAT

SUB

SUB

EVENT 4K

5

Connect Manner

UNLOCKLOCK

5

EVENT 2K

1. Turn the POLE/SAT-BM/SAT-TP back control switch to “LOCK” position.

2. Place the EVENT 2K on a flat surface and rotate the POLE/SAT-BM/SAT-TP from low to high into the bottom
threaded bracket until it is tight.

3. After the installation is completed, if you choose to turn the control switch to the “UNLOCK” position, you
can rotate the column to any angle. If you need to fix the angle, turn the control switch to the “LOCK”
position.

4. If you need to disassemble, turn the control switch to the “LOCK” position, and then rotate the column in
the opposite direction.

6

Connect Manner

EVENT 4K

1. Place the EVENT 4K SUB on a flat surface.

2. Push the SAT from front to back into the SUB connector until it is tight.

3. After the installation is completed, if you need to disassemble, press the “LOCK” button of the SUB
connector and push the SAT forward slowly.

5

7

Back Panel Description

6

EVENT 2K / EVENT 4K

(10)

(8)

(6)

(5)

(4)

(1)

(2)
(3)

(9)

(7) (11) (12) (13)

(14)

(15)
(16)
(17)

1. AC INPUT-The AC connection is established via the IEC connector. The IEC connector is compatible with

a lockout power cord (not included).

2. POWER - AC switch for turning the power on or off. When POWER is turned on,the power led lights up

and LCD screen lights up.

3. MP3/BT PLAYER for option.

4. Convection fan.

5. OUTPUT - The XLR output sends mixed input signals to other speakers or subwoof

the level of signal sent to the OUTPUT, The MASTER VOL or DSP control settings do not affect the

OUTPUT.

6. INPUT1 / INPUT2 - FOR line\ MIC or HI-Z input level control is available for INPUT 1/2

7. INPUT3/4 - FOR line stereo input level control is available for INPUT 3/4

8. RCA INPUTS- FOR line stereo input level control is available for INPUT 3/4

9. VOLUME- Input level is

10. AUX IN - Line input level control is available for stereo

11. SIG / LIMITER signal light, it will light green when there is signal, and the red light will start to ligh when

the amplifier starts to compress.

12. LCD - DSP Control and monitoring interface

13. MASTER VOL - Total volume adjustment ,range: -60dB ~ +10dB. DSP-Scroll thro

select the available options. Press the MASTER VOL knob to enter the DSP menu item.

14. IP CONTROL - By connecting to the router, the computer can connect to the router and use the software

(CS PRO) to adjust user presets.

15. POWER indicators - the POWER LED will lihg up when turn on.

16. PROTECTION indicators - the PROTECTION LED will lihg up when an exception occurred in DSP

17. LIMITER indicators - the LIMITER LED will lihg up when the amplifier starts to compress

used to adjust the level control of the level of a signal input.

ers, Input level controls

ugh the menus and

8

DSP Control

With the integrated DSP control menu, users can select multiple DSP system settings on the speaker.

To access the DSP Control menu, follow below steps:

1. Press the MASTER VOL knob and the DSP Control menu will appear.

Input Settings

Factory Presets

EQ

User Programs

System

2. Use the MASTER VOL knob to scroll through the menu items.

Factory Presets

EQ

User Programs

System

Exit

3. Press the MASTER VOL knob to select the menu item you want to modify.

The focus will move to the menu item on the right side of the DSP menu.

Factory Presets

01:LIVE

02:MUSIC
03:FLAT

7

4. Use the MASTER VOL knob to scroll through the menu items.

5. Press the MASTER VOL knob to confirm the selected menu item.

The settings will be saved. The focus will return to the menu item on the left side of the DSP menu.

EVENT 2K
Preset: LIVE
Gain:

0.0dB

Signal:

6. Repeat steps 2 through 5 to modify other DSP and system settings.

7. Select EXIT to return to the main screen.

User Programs

System

Exit

Input Settings

Factory Presets

Full range speaker DSP control menu

Full range speaker DSP control menu options are available for speakers.

EXIT menu

The EXIT menu is used to return to the home screen.

NOTE!

After 1 minutes of inactivity, the display will turn off. The speaker works properly.

9

7

DSP Control

MENU

The Input Settings menu is used to configure the speaker's input sensitivity control and Delay and Phase

control;

Input Settings

Are you sure
Switch to Mic ?

No

Yes

Input Settings

MIC

Delay: 0 Feet

Phase Exit

HI-Z

Input Settings

Are you sure
Switch to High
Resistance ?

YesNo

Input Settings

MIC HI-Z

Delay: 0 Feet

Phase Exit

The MIC is used as the Input 1 input sensitivity control. After confirming the MIC input, the MIC light on the

panel will light up.

HI-Z is used as the input 2 input sensitivity control. After confirming the HI-Z input, the HI-Z lamp on the

panel will light up.

The Delay menu is used to create time calibrations with other speakers. The options available for this

selection are: 0 or a maximum delay of 69.19 Feet. The delay can be changed in increments of 0.69 Feet. The

default is 0 Feet.

Phase setting is set for the entire loudspeaker system;

The Factory Presets menu is used to configure the type of sound that the speaker sends. The options

available for this selection are: LIVE, MUSIC, SPEECH, and MONITOR. The MASTER VOL menu button can be

used to configure the presets for different occasions.

Factory Presets

01:LIVE

02:MUSIC
03:FLAT

Input Settings

MIC HI-Z

Delay: 69.16 Feet

Phase Exit

Factory Presets

04: SPEECH
05: DJ

EXIT

10

- LIVE- for live sound reinforcement applications. (Defaults)

- MUSIC - for recording music playback and EDM applications.

- SPEECH- for vocal language applications.

- MONITOR - for ground monitoring

EQ menu

EQ FREQ Q GAIN

0.0

HS

12.1K

HI

2.52K

MD

500.0

LM

101.5

LO

The EQ menu is a 4-band EQ (equalizer) that the user can fine tune in addition to FUNCTION and LOCATION.

The options available for this selection are: HI, MD, LM, and LO.

3.00

3.00
LS

0.0

0.0

0.0

EQ FREQ Q GAIN

101.5 LS 0.0

L0

ALLBPSS

FLAT

Exit

NO

DSP Control

The EQ menu is a 4-band EQ (equalizer) that the user can fine tune in addition to FUNCTION and LOCATION.

The options available for this selection are: HI, MD, LM, and LO.

Back

7

HI

MD

LM

LO

NOTE!

The indoor equalizer (EQ) range shown is the factory default range for individual speakers. When the

woofer is selected, any EQ below the crossover point is bypassed.

To use EQ above the crossover point, do the following:

> Rotate the button to reach the desired frequency.

User Programs user save settings

User Programs

01:EMPTY
02:EMPTY
03:EMPTY

User Programs

14:EMPTY
15:EMPTY
16:EMPTY

12.1K

2.52K

500.0

101.5

Default: 0 decibels

Range: -18 decibels – +18 decibels

ALLBYPASS will be deleted, invalidating all set EQs.

FLAT is to restore all the adjusted EQ to factory settings.

User Programs

05:EMPTY
06:EMPTY
07:EMPTY

User Programs

15:EMPTY
16:EMPTY

EXIT

User Programs

11:EMPTY
12:EMPTY
13:EMPTY

User Programs

01:EMPTY
02:EMPTY
03:EMPTY

Load

Save

Delete

User Programs

01:EMPTY
02:EMPTY
03:EMPTY

There are 16 presets available for user storage, stored as the currently set EQ value, which can be named

according to user requirements. It can be written in 7-digit English or letters and symbols; it can be set

according to the load/Save/Delete related EQ.

System menu

The System menu is used to configure the system. You can also configure the accessibility of this menu and

modify the settings, reset to factory defaults.

The FIRMWARE / HARDWARE menu is used to display, preset version, firmware version.

Save

Delete

Exit

System

FIRMWARE V1.0
HARDWARE V1.0

Name: EVENT 2K

Default Settings Exit

11

7

DSP Control

The Name menu is the name of the current speaker. This menu allows you to customize the name of the

speaker as needed.

The Default Settings menu is used to reset the speakers to their original factory settings. The options for this

selection are: NO or YES.

The Exit menu is used to return to the main interface.

To reset your system to original factory settings, follow below steps:

1. From the System menu in the DSP menu, select Default Settings.

A message prompt to restore the factory settings will appear - Reset ALL Setting - YES.

System

FIRMWARE V1.0
HARDWARE V1.0

Name: EVENT 2K

Default Settings Exit

2. Reset ALL Setting select YES

3. Are you sure choose YES

The speaker will reboot the system and reset the system to its original factory settings.

System

SETTING...

System

System

Reset All
Settings ?

YesNo

Are you sure ?

YesNo

12