Toastmaster 999201U User Manual
READ AND SAVE THESE INSTRUCTIONS
WA R N I N G : A risk of fire and electrical shock exists in all electrical appliances
and may cause personal injury or death. Please fo l l ow all safety instructions.
Meat Grinder Accessor y
Use and Care Guide Model 999201U
Please refer to the fo l l owing info rmation in addition to the Model 1770U
H e avy Duty Stand Mixer Use and Care Guide for complete instru c t i o n s.
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be fo l l owe d
to reduce the risk of fire, electric shock and injury to persons, including the fo l l ow i n g :
• Do not contact moving parts. Never feed food by hand. Always use food pusher.
• Do not use fingers to scrape food away from disk while appliance is operating.
Cut-type injury may result.
SAVE THESE INSTRUCTIONS
THIS PRODUCT IS FOR HOUSEHOLD USE ONLY
THIS MEAT GRINDER ACCESSORY IS DESIGNED FOR
USE ONLY WITH THE TOASTMASTER MODEL 1770U
HEAVY DUTY STAND MIXER.
Thank you for purchasing this Meat Grinder Accessory for the Toastmaster Heavy
Duty Stand Mixer.
Featuring superior technology and craftsmanship, the Global Design Collection is an
exceptional line of kitchen appliances. The state-of-the-art design of the appliances and
accessories is matched only by their excellent performance. Enjoy!
a
b
a
d
e
f
c
g
Figure 1
a
b
Figure 3
Figure 2
Figure 1 - Stand Mixer in position
#5 with Meat Grinder
Accessory in drive
mechanism “a”
a. latch
Figure 2 - Grinder Body
a. food pusher
b. food tray
c. housing
d. auger
e. blade
f. disk
g. ring
Figure 3 - Attaching Meat Grinder
a. latch
b. notches
Be sure to fill out warranty service information.
USING YOUR MEAT GRINDER
NOTE:All food must be deboned and cut into 1-11⁄2 inch cubes prior to processing.
Use tenderized or lean cuts of meat with all visible signs of fat removed. Avoid
grinding meat that has a large amount of marbled fat.Large pieces of fat will not go
through the holes in the disk.
1. Before using, clean all parts. See CARE AND CLEANING.
2. Place stand mixer on a dry level surface and turn swivel arm to position #5,
(see figure 1). Make sure that the speed control dial is in the Off position.
3. Plug into 120 V ~ 60 Hz outlet. Hold the speed control dial in the park
s e t t i n g . For further details, refer to “Park Setting Operations” in the stand
mixer use and care guide.
4. I n s e rt the auger into the housing of the meat gri n d e r, (see figure 2). T h e
2
Loading...