Model:90116
HYBRID
SMART WATCH ACTIVITY TRACKER
Catalogue
1 Packing List
2 Product Detials
3 Working Condition
4 Waterproof Level
5 Watch Battery
6 Charging Instructions
7 Wear Watch
8 Install APP
9 Bind Watch
10 Time Calibration
11 Operating Instructions
12 Shortcut Menu
13 Menu One
(1) Heart Rate Interface
(2) Weather Interface
(3) Activity Data
(4) Missed Calls
(5) SMS Interface
(6) Social Notification
14 Menu Two
（1）Alarm clock interface
（2）Sleep Interface
…………………………………………………
……………………………………………
…………………………………………
……………………………………………
…………………………………………………
……………………………………………………
…………………………………………………
…………………………………………
……………………………………………
…………………
…………………
…………………
………………………………………………
…………………………………………
……………………………………………
………………………………………
……………………………………
…
………
………………………
………………………………………
…
……………………
…
…………………………
…
…………………………
……………………………………
01
02
03
04
05
06
08
09
11
12
13
17
18
21
23
25
26
27
28
29
（3） Music Control
（4）Remote Camera
（5）Search for the Mobile Phone
（6）Setting Interface
15 Menu Three
（1） Remind Interface
（2）Stopwatch Interface
（3）Countdown Interface
（4）Schedule Interface
16 Clean Watch
17 Troubleshooting
18 Specifications
19 Precautions
20 FCC Statement
……………………………………………
…………………………………………
……………………………
…………………………………………
………………………………………
………………………………………
……………………………………
………………………………………
………………………………………………
…………………………………………
………………………………………………
…………………………………………………
…………………………………………
31
32
32
33
36
37
37
38
39
40
42
43
45
１. Packing List
A
C
A：Smart watch
B：User manual
C：Charging dock
D：Micro-USB cable
1
B
D
2. Product Details
Touch Screen
Physical
Watch Hands
Charging
Contact Surface
Charge Lamp
Up Key
Down Key
Heat
Rate Lenses
USB
Charger Port
2
3. Working Condition
Working temperature
-10°C~55°C
Working humidity
0~100%
3
4. Waterproof Level
The watch can withstand the pressure equivalent to 30
meters water depth, suitable for daily use, is not
recommended to wear when swimming in the pool or
shallows, can not be used for diving, does not support
bathing and sauna.
4
5. Watch Battery
（1） The smart part can be used for about 3 days when
the watch is fully charged.
（2） If the watch shows low battery power, the smart part
function will be automatically turned off, but the watch
hands can continue to operate normally for about 30 days.
Notice：The smart part can be used for about 3 days and
is estimated based on the average use of the watch.The
actual length of use varies depending on how much the
notification is reminded and how long the heart rate is on.
5
6. Charging Instructions
（1） Connect the USB cable to the USB power adapter.
（2） Connect the other end of the USB cable to the
charging dock.
（3） Plug the USB power adapter into a power outlet.
（4） Press the back of the watch into the charging cradle
to charge the watch.
Notice：
1） Before using the watch for the first time, fully charge the
watch before using it, and it takes about two hours to
complete the charging.When using a computer USB port,
etc., as the charging source for the watch, it may take up to
3 hours to fully charge the watch.
2） Use the charger only on a flat desk, away from
implanted devices.
6
3） If there is an obstacle between the watch and the
charging dock, the watch may not charge properly.
4） When the battery is low, please charge it in time. After the
watch is charged, please disconnect the charging power.
5） When the battery is low, please charge it in time. After the
watch is charged, please disconnect the charging power.To
avoid damage to your watch, please use the original
factory-installed charging accessories.
6） Do not use if the charging device is damaged.
7） Unplug the charging device when cleaning your watch,
during a thunderstorm, or when it will not be used for a long
time.
8） Do not attempt to disassemble or modify your watch,
charging cable or charging dock.
9） Do not twist or pinch the charging cable.
10） Do not attempt to remove or replace the batter y or
watch by yourself. The substances contained in this product
and the battery may cause harm to the environment or
human health. Please dispose of it properly.
7
7. Wear Watch
(1) If you are accustomed to using your right hand, wear your
watch in your left hand, on the contrary wear your watch in your
right hand.
(2) Wear the watch on your wrist and pull the strap out of the
hole in the buckle.
(3) Straighten the wrist strap until your wrist is slightly tight and
slightly loose.
(4) Pass the pin through the hole in the strap and secure the
strap to the button.
(5)You can also freely change the watchband you want, push the
raw ear inward, and remove the strap from the case.
(6)When replacing the new watchband, push the raw ear
inwards, parallel to the ear holes at both ends, release the raw
ear, and pull the strap to adjust.
8
8. Install APP
(1) Apple Mobile Device Client
Use an iOS 8.0 or above iPhone to scan the QR code below
or search for and install the“ITING” APP from your
Apple Store to your phone.
(2) Android mobile client
Use Android phones with Android 5.0 and above to scan
the QR code below or download and install the “ITING”
app from the Google Play to your phone.
Note：
After leaving the factory or restoring the factory settings, it
needs to activate the watch through the APP to use it
normally.
9
Apple Store
Google Play
9. Bind Watch
(1) Turn on your phone's Bluetooth and open the APP on
your phone.
Note：
1) If you are a new user, you need to create a new account.
2) If you have registered an account, log in using the APP
with your email address and password.
(2) After logging in, follow the instructions on the APP to
scan the watch with the QR code to bind the watch.
Note：In the binding process, the watch needs to be near
the mobile phone.
(3) When the connection is successful, the watch and
mobile device will prompt "Pairing successful" after the
binding is completed.
(4) After the binding is successful, your watch screen will
guide you step by step through the setup process.
(5) If the binding fails, the APP will remind you to reoperate
the binding.
10
10. Time Calibration
(1) After the watch and phone APP are successfully binded,
follow the instructions on the APP to scan the watch for
time calibration.
(2) When the time calibration are completed, click the
"Home" button to return to the main interface of the APP.
11
11. Opearting Construction
(1) Touch screen operation
Click
Swipe left
Double click
Swipe right
Long press
Swipe up
Rotate
Swipe down
(2) Key describtion
Up key：Turn on the screen; return to the home page;
turn on the standby mode; long press for 5 seconds to
turn on/off
Down key：Light the screen; return to the previous layer;
long press to display the binding QR code
Up key + down key：Long press the two buttons at the
same time for 8 seconds to power off and restart
Smart crown: Light up the screen; rotate the selection
menu; press the button to confirm the selection;
double-click the button, the watch pointer turns to
display 9:15
12
Loading...